Brave is a versatile and efficient power board that can provide 12v, 5v and 3.3v outputs for various applications. It can be powered by battery or solar panel, and the battery can be recharged by solar energy. It can also be powered by a USB port if needed. This board is ideal for IoT projects that require reliable and stable power supply in different environments. #internetOfThings #IoT #power #management #usb

3D Camera Module is a scalable SPI enabled 4 camera array pinout for 3D photogrammetry reconstruction which uses I2C to connect between each module to expand camera capacity while keeping capture sequences in sync. It uses ATMega32U4 with its built in USB 2.0 for data transfer and camera array adjustments and capture as well as a micro SD card slot for local image storage. An interrupt logic pinout should be used on the SPI master module as capture command. Each module is powered via USB-C (5V) or barrel jack (12V regulated to 5V).

This project is a DC-DC Buck converter based on the LM2596 IC. It is designed to step down the input voltage from 12V to a regulated output of 5V #Buck #LM2596 #project

sEMG-DAQ is a wearable 6 channel data acquisition unit for capturing surface electromyographic (sEMG) signals from human arm muscles using SJ2-3593D jack connectors while conditioning, digitizing, processing and transmitting them as sEMG data to an external AI accelerated board through an SM12B-SRSS IDC connector where AI models are run for various applications including robotic control, muscle signals medical assessment and gesture recognition. The board leverages an INA125P instrumentation amplifier together with filter stages utilizing LM324QT op-amps for conditioning and an STM32G4A1VET6 microcontroller for the digitization, processing and data transmission of the signals. Since AI models can only be as good as the data, the design of such a DAQ is necessary to ensure clean, reliable and real-time data for AI applications requiring sEMG data. The board also has USB-FS and JTAG to cater for debugging. The power (5V) is fed through a screw terminal and is regulated by two LDK320AM LDO regulators to offer 5V, 3.3V and 1.8V to meet the requirements of various components on the board.

IMPORTANT NOTICE: Hey, I opened editing permissions and this doc is broken, see the frozen version here: https://www.flux.ai/markwuflux/on-air-markwu2001-remix-r1-backup-freeze-0b49 R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C.

Linear Voltage Regulator with 1 Positive Fixed Output 5.0V. Input voltage 35V max With JST connectors(Vin and +5V) and with block terminal connectors(Vin and +5V) #project-template #voltageregulator #project

Cree un cargador de baterías para salidas de 5v, 7v, 9v y 12v con un LED que indique qué salida se está utilizando. Con un dip switch y que utiliza una pantalla o LEDS para indicar el nivel de carga de la batería o si está cargando o no, que cuando la batería esté cargada a la mitad emite un sonido y cuando termina de cargar emite de nuevo el sonido y que deje de cargar automaticamente

Breadboard power supply provides both 3.3 and 5V DC to suit all popular microcontrollers such as the Arduino.

A 5V power supply for solderless bread board designed.

+5V to ±12V DC-DC converter

ESP32 8 Relay Board. Has onboard mains to 5V or can use the ESP VIN for the +5V. 8 onboard relays capable of switching about 5A without adding additional tin to the traces.

Design Project, This design contains a +/- 5v square wave, an ohm meter, a voltmeter, a dc reference and a rail splitter.

This is a reference design of TPS56339 DC-DC Converter IC with input voltage 4.5-24V and output 5V and 3A #dcdc #ti #power #3A #5V #referenceDesign #powermanagement #texas-instruments #template #reference-design

This compact breakout board makes it easy to add high-quality audio output to your microcontroller projects using the MAX98357A/B Class D audio amplifier. Perfect for Arduino, ESP32, Raspberry Pi, or any microcontroller with I2S output capabilities. Features High-Performance Audio: Delivers Class AB audio quality with Class D efficiency (92% efficient at 1W) Powerful Output: 3.2W into 4Ω speakers at 5V supply Clean Sound: Low distortion (0.013% THD+N at 1kHz) Wide Supply Range: Operates from 2.5V to 5.5V Simplified I2S Interface: No MCLK required, just BCLK, LRCLK, and DIN Selectable Gain: Solder jumpers for easy gain selection (3dB, 6dB, 9dB, 12dB, or 15dB) Channel Selection: Configure for left, right, or combined (mono) output Filterless Design: No need for external output filtering components Compact Form Factor: Minimal board space with optimized layout Applications Smart speakers and voice assistants Portable audio devices IoT audio projects Gaming devices and sound effects Educational audio projects Digital instrument amplification The FLUX MAX98357 breakout board requires only three I/O pins plus power, making it the perfect audio solution for projects where simplicity and sound quality matter.

The Arduino Uno R3 is a microcontroller board based on a removable ATmega328P 20 digital input/output pins AVR MCU 8-Bit 5V USB 16MHz #Module #Arduino

This is a reference design of step-up converter based on ADP1618 with 5V input and 12V output #dcdc #5V #12V #power#referenceDesign #powermanagement #analogdevices #template

FEEDBACK PROJECT - Change History broke the project - Converts the 5v power from microUSB to 3.3v.

Provides 5v power from MicroUSB

Converts 5v power from MicroUSB to 3.3v.

Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template #manufacturer-design-rules

Buck converter from 5V to 3.75V without dedicated IC

Brave is a versatile and efficient power board that can provide 12v, 5v and 3.3v outputs for various applications. It can be powered by battery or solar panel, and the battery can be recharged by solar energy. It can also be powered by a USB port if needed. This board is ideal for IoT projects that require reliable and stable power supply in different environments. #IoT #power #management #usb

Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C.

This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

The Ariel AI Chip, a state-of-the-art integrated circuit designed for high-performance computing applications, incorporates an innovative architecture that leverages radical transistor technology to optimize AI and machine learning tasks. At the heart of this chip lies a quad-core CPU operating at a clock speed of 2GHz, distinguished by its part number CPU-RT-4C-2G. The chip's power management is efficiently handled by a DC power supply, specified as DCPS-5V, ensuring a stable 5V input. Key to its operation are two NPN transistors, identified by part numbers NPN-TRANS-001 and NPN-TRANS-002, which, along with a pair of 1kΩ resistors (RES-1K and RES-1K-002) and a 10µF capacitor (CAP-10UF), form the critical signal processing and conditioning circuitry. This assembly is designed for seamless integration into advanced computing systems, particularly those focused on Flux AI environments, where its performance and efficiency can be fully leveraged. The Ariel AI Chip sets a new benchmark in AI computing, offering unparalleled processing power and efficiency for cutting-edge applications.

This project is a DC-DC Buck converter based on the LM2596 IC. It is designed to step down the input voltage from 12V to a regulated output of 5V #Buck #LM2596 #project

R2 w Thread changes: -Moving to Letter Modules for ease of design -Adding MGM210L for Matter on Thread On/Off and intensity control -Shifted A and R letters closer to fix Kerning -Optional: Add unpopulated AA Battery Holder for battery option R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C. #template #arduino-matter

12v y 5v out

The semgdaq board is a wearable 6 channel data acquisition unit for capturing surface electromyographic (sEMG) signals from human arm muscles using SJ2-3593D jack connectors while conditioning, digitizing, processing and feature extracting them then transmitting the feature data as vectors to an external AI accelerated board through an SM12B-SRSS IDC connector using 12C and UART communication protocals where AI models are run for various applications including robotic control, muscle signals medical assessment and gesture recognition. The feature vectors are comprised of onset detection, slope sign changes, autoregression coefficients and Short Time Fourier Transform magnitude spectrum data for each segment or window of the signals in real time. This vectors can be used as the basis for further feature extraction on more computationally resourceful hardware where machine learning algorthms can be employed for descision making in the applications mentioned earlier. The board leverages INA125P instrumentation amplifiers together with filter stages utilizing LM324QT op-amps for conditioning and an STM32G4A1VET6 microcontroller for the digitization, processing, feature extraction and data transmission. Since AI models can only be as good as the data, the design of such a DAQ is necessary to ensure clean, reliable and real-time data for AI applications requiring sEMG feature data. The board also has USB-FS and JTAG to cater for debugging and external flash memory to extend its data storage and processing capability. The power (5V) is fed through a screw terminal and is regulated by two LDK320AM LDO regulators to offer 5V, 3.3V and 1.8V to meet the requirements of various components on the board.

Brave V2 is a versatile and efficient power board that can provide 12v, 5v and 3.3v outputs for various applications. It can be powered by battery or solar panel (now revised to accepts input voltage of upto 30V), and the battery can be recharged by solar energy. It can also be powered by a USB port if needed. This board is ideal for IoT projects that require reliable and stable power supply in different environments. #IoT #power #management #usb

The Ariel AI Chip, a pioneering component in the realm of artificial intelligence hardware, integrates a suite of electronic elements tailored for high-performance computing applications. At the heart of this assembly lies a CPU with a Radical Transistor architecture, featuring a quad-core setup clocked at 2GHz, identified by the part number CPU-RT-4C-2G. Power management is facilitated through a DC Power Supply, marked DCPS-5V, ensuring a stable 5V supply to the intricate circuitry. The chip's switching capabilities are bolstered by two NPN transistors, NPN-TRANS-001 and NPN-TRANS-002, which play a crucial role in signal modulation. Essential to the chip's operation are the passive components: two 1kΩ resistors (RES-1K and RES-1K-002) and a 10µF capacitor (CAP-10UF), which together with the transistors, form a robust network ensuring reliable performance under varying load conditions. Designed for integration into advanced AI systems, this chip stands out for its innovative use of standard components in a configuration that emphasizes efficiency, reliability, and high-speed data processing capabilities.

The Ariel AI chip prototype, designed for integration with Flux AI for advanced simulation and testing, incorporates a suite of electronic components optimized for high-performance computing applications. At the heart of this system lies a CPU with a radical transistor architecture, featuring a 4-core configuration and a clock speed of 2GHz, identified by part number CPU-RT-4C-2G. Power management is facilitated through a DC Power Supply, specified as DCPS-5V, ensuring a stable 5V supply to the system. The circuit's dynamic performance is modulated by two NPN transistors, NPN-TRANS-001 and NPN-TRANS-002, which, along with precision resistors RES-1K and RES-1K-002 (both 1kΩ), and a 10μF capacitor (CAP-10UF), form the critical signal processing path leading to the CPU. This configuration is designed to provide an efficient, reliable processing environment for AI computations, with an emphasis on minimizing latency and maximizing throughput. The Ariel AI chip's architecture, combining traditional components with an innovative CPU design, offers a versatile platform for developing advanced AI applications, reflecting a significant step forward in computational technology.

This is a great battery-backed real time clock (RTC) that allows your microcontroller project to keep track of time even if it is reprogrammed, or if the power is lost. Perfect for datalogging, clock-building, time stamping, timers and alarms, etc. Equipped with PCF8523 RTC - it can run from 3.3V or 5V power & logic!

The Ariel AI Chip, a pioneering component in the field of artificial intelligence hardware, integrates advanced features designed to enhance computational efficiency and AI processing capabilities. This chip is distinguished by its utilization of a quad-core CPU with a clock speed of 2GHz, operating on a radical transistor architecture that promises significant improvements in speed and power efficiency. Key components that constitute the Ariel AI Chip include a DC power supply with a 5V output (DCPS-5V), NPN transistors (NPN-TRANS-001 and NPN-TRANS-002) that serve as the fundamental switching elements, precision resistors (RES-1K and RES-1K-002) each with a resistance of 1kΩ, and a capacitor (CAP-10UF) rated at 10μF to stabilize voltage and filter noise. This chip is designed for integration into systems requiring advanced AI capabilities, offering a comprehensive solution for developers looking to leverage machine learning and artificial intelligence in their applications. With its innovative architecture and component selection, the Ariel AI Chip stands out as a versatile and powerful tool for a wide range of AI applications, from embedded systems to more complex computational platforms.

5V Trigger Relay Module For Arduino And Raspberry Pi 5V Trigger Relay Module For Arduino And Raspberry Pi

Linear Voltage Regulator IC Positive 5V Fixed 1 Output 1.5A TO-220-3 #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LinearRegulator #VoltageRegulator

The Ariel AI Chip, an innovative component designed for high-performance computing applications, integrates a sophisticated array of electronic parts to deliver unparalleled processing capabilities. At the heart of this system is a CPU with a radical transistor architecture, featuring a core count of 4 and a clock speed of 2GHz, identified by its part number CPU-RT-4C-2G. Power management within the chip is efficiently handled by a DC Power Supply, rated at 5V, with the part number DCPS-5V, ensuring stable and reliable operation. The chip's signal processing and amplification needs are addressed through the inclusion of two NPN transistors, with part numbers NPN-TRANS-001 and a similar variant, providing the necessary gain and switching capabilities for complex computational tasks. Signal conditioning is further enhanced by a pair of 1kΩ resistors, RES-1K and RES-1K-002, and a 10µF capacitor, CAP-10UF, which work together to filter and stabilize the power supply and signal pathways, ensuring clean and noise-free operation. This integration of components within the Ariel AI Chip offers electrical engineers a robust platform for developing advanced AI systems, combining high processing power with efficient power management and signal integrity, suitable for a wide range of applications in the field of artificial intelligence.

PowerBoost 500C is the perfect power supply for your portable project! With a built-in battery charger circuit, you'll be able to keep your project running even while recharging the battery! This little DC/DC boost converter module can be powered by any 3.7V LiIon/LiPoly battery, and convert the battery output to 5.2V DC for running your 5V projects.

Simple UPDI programmer for tinyAVR, megaAVR and AVR-Dx microcontrollers with voltage selection switch (5V and 3.3V).

This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

I2C to dual PWM controller. The LED-Warrior18, manufactured by Code Mercenaries, is an I2C to dual channel PWM LED driver specifically designed to provide seamless brightness control for LED applications. This component, available in SOIC8 package (LW18-S) and as a ready-to-use module (LW18-01MOD), offers dual 16-bit PWM outputs with a dimming range from 0.001% to 100% and operates at a PWM frequency of 730 Hz. It supports programmable period lengths for higher-frequency or lower-resolution operation and includes an 8-bit data to logarithmic mapping feature for smoother dimming operations with just 256 steps. The LED-Warrior18 is engineered for minimal external circuitry with a 5V power supply requirement, offering ease of use in various lighting applications. It also features a sync mode for synchronized control of multiple units and customizable power-on status settings, making it highly versatile for standalone operations or integrated systems. Additionally, custom variants of both the chip and module are available, catering to specific application needs. The module version, LW18-01MOD, simplifies integration by including terminal blocks and supporting up to 4A load sink current for each output. The LED-Warrior18 stands out for its straightforward interface and operational flexibility, providing a comprehensive solution for advanced LED dimming and control projects.

MEGA 2560 PRO MINI 5V (Embed) Development Board Embed CH340G / ATMEGA2560-16AU #promini #arduino #Mega #ATMEGA2560

The Ariel AI chip prototype is an advanced electronic component designed to enhance the capabilities of Flux AI systems through a sophisticated arrangement of transistors, resistors, capacitors, and a cutting-edge CPU. Key components include two NPN transistors (part numbers NPN-TRANS-001 and NPN-TRANS-002), which are essential for signal amplification, alongside precision resistors (RES-1K and RES-1K-002) each with a resistance of 1kΩ, and a capacitor (CAP-10UF) with a capacitance of 10μF, crucial for filtering and stabilizing the voltage supply. At the heart of the design is a revolutionary CPU (part number CPU-RT-4C-2G) featuring a quad-core setup with a clock speed of 2GHz, based on a radical transistor architecture, designed to deliver unparalleled computational performance for AI tasks. This component set is powered by a 5V DC power supply (DCPS-5V), ensuring a stable and efficient operation. The Ariel AI chip is engineered for high-speed, reliable performance in demanding AI applications, representing a significant advancement in electronic component design for artificial intelligence systems.

R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C.

5V

5V

5V

This project involves designing a DC-DC buck converter circuit to efficiently step down a 12V input voltage to a stable 5V output voltage. The converter is suitable for various electronic applications requiring 5V DC supply from a 12V source.

This project involves designing a DC-DC buck converter circuit to efficiently step down a 12V input voltage to a stable 5V output voltage. The converter is suitable for various electronic applications requiring 5V DC supply from a 12V source.