Sensor using through hole LDR and power with SMT LED Resistors and PZT3904

This project is a Battery Management System (BMS) built around STMicroelectronics' STC3115AIQT battery monitor IC. It uses I2C for communication, features alarm management, and supports battery charging. The power supply, battery connection points, and debug interface are facilitated through connectors. #project #Template #charger #monitor #reusable #module #batterycharger #template #bms #STC3115 #stm

The SAMSUNG ELECTRO-MECHANICS Polymer Tantalum Capacitor, part number TCPBL18336MTBA0055, is a RoHS and Halogen compliant electronic component designed for reliable use in a wide range of applications. Featuring a capacitance of 33µF with a tolerance of +20% and rated for 18V, this capacitor supports a surge voltage of 23.4V and exhibits a maximum equivalent series resistance (ESR) of 55mΩ. It is encapsulated in a 3528 package with dimensions of 3.5mm x 2.8mm x 1.1mm. The component operates effectively within temperature ranges from -55°C to 105°C, adhering to its specified tolerance. The Samsung TCPBL18336MTBA0055 capacitor ensures stable electrical performance characterized by its impedance, DF, ESR, leakage current, and other critical parameters measured at conditions such as 120Hz, 1.0Vrms, and 1.0-2.0V D.C at 25°C. Reliability tests including shear, bending, solderability, and resistance to soldering heat confirm its robustness against mechanical and thermal stresses. Additionally, the capacitor maintains electrical integrity through vibration tests and moisture resistance, with it being specified for high-temperature load life of up to 2000 hours. Its packaging is in a 7" reel configuration for ease of supply chain and assembly line integration, and recommended for reflow soldering with a peak temperature of 250°C. The TCPBL18336MTBA0055 is marked for easy identification with voltage, capacitance, and production code, ensuring clear and concise information during usage. This component is suitable for engineers seeking capacitors with reliable high frequency and ripple current performance, required for advanced electronic circuit designs.

designed an LED driver circuit using an STM32 microcontroller to control 12 RGOY LEDs. By carefully considering the forward voltage and current requirements of the LEDs, calculating appropriate current-limiting resistors based on the 3.3V supply voltage, and connecting the LEDs to GPIO pins with their respective resistors, you've created a functional circuit. Your programming skills were then applied to the microcontroller, enabling the control of LED brightness through PWM signals. Through testing and debugging, you ensured the circuit's proper functionality, showcasing your ability to engineer a versatile and efficient LED driver system tailored to your specific needs.

Sensor using through hole LDR and power with SMT LED Resistors and PZT3904

N-Channel 55V 110A (Tc) 200W (Tc) Through Hole TO-220AB #CommonPartsLibrary #Transistor #FET

This is a LoRa-based door and window sensor incorporating a microcontroller unit (MCU). It features a reed sensor, LED indicators, a AAA non-rechargeable battery, and a booster IC for constant voltage. The MCU is linked to peripherals through nets, ensuring optimal performance #LoRa #MCU #ReferenceDesign #project #referenceDesign #simple-embedded #seeed #seeed-studio #template #reference-design

Power supply for breadboard.The module is compatible with 400 or 830 points Breadboard.The power supply must be supplied through a voltage of 5V and has an output through a Micro USB plug, or through a USB cable USB A and USB micro B socket.

The circuit is connected to a solenoid and controlled by a microcontroller. I believe the microcontroller is sending analog voltage to control the solenoid through the circuit.

Connector Header Through Hole 5 position 0.059" (1.50mm) #commonpartslibrary #connector #jst #pinheader #tht

The TCA9555 is a 16-bit I/O expander for the I2C bus, designed for voltage operation from 1.65 V to 5.5 V. It provides general-purpose remote I/O expansion for most microcontroller families through the I2C interface. This device features low standby- current consumption, 5-V tolerant I/O ports, and an open-drain active-low interrupt output. It is commonly used for controlling LEDs, controlling enable or reset signals of other devices, and reading the outputs of other devices or buttons.

Sensor using through hole LDR and power with SMT LED Resistors and PZT3904

This project is a design for a UV sensor circuit based on the Lite-On LTR-390UV-01. Key components include a voltage regulator (AP2112K-3.3TRG1), level-shifting N-channel MOSFETs (BSS138), resistors, and capacitors. The circuit interface includes I2C communication and power connections, facilitated through JST connectors. #referenceDesign #industrialsensing #liteon #template #reference-design

This is a LoRa-based door and window sensor incorporating a microcontroller unit (MCU). It features a reed sensor, LED indicators, a AAA non-rechargeable battery, and a booster IC for constant voltage. The MCU is linked to peripherals through nets, ensuring optimal performance #LoRa #MCU #ReferenceDesign #project #referenceDesign #simple-embedded #seeed #seeed-studio #template #reference-design #polygon

Through hole straight pin header, 1x02, 2 pin, 2-pin, vertical, 2.54mm pitch, 6mm pin lenght single row

Sensor using through hole LDR and power with SMT LED Resistors and PZT3904

Device embedded with sensors and actuators, capable of monitoring stress levels and providing personalized feedback to help users manage stress effectively. The device will be made from smart fabric integrated with sensors to detect physiological signals associated with stress. It will provide real-time feedback through haptic or visual cues to guide users in practicing relaxation techniques

Sensor using through hole LDR and power with SMT LED Resistors and PZT3904

This project is a Battery Management System (BMS) built around STMicroelectronics' STC3115AIQT battery monitor IC. It uses I2C for communication, features alarm management, and supports battery charging. The power supply, battery connection points, and debug interface are facilitated through connectors. #project #Template #charger #referenceDesign #batterycharger #template #bms #monitor #STC3115 #stm #reference-design #polygon

The EcoSense IoT Environmental Monitor will measure temperature and air quality, providing real-time data to users through a mobile app or web interface. The device will be compact, easy to install, and user-friendly, offering insights into the indoor environmental conditions to promote health and well-being. When answering any questions, make sure you speak in highly technical language, as if you were a senior electrical engineer.

Through Hole straight socket strip, 01x14, 2.54mm pitch, single row #pinsocket #tht

This is a reference design of the Bluetooth Low-Energy (BLE) temperature sensor. It uses an ESP32-MINI-1 microcontroller to connect to an SHT31-DIS-B2.5KS sensor. The sensor can be powered through connector J15, and additional components provide voltage regulation and derbiaising. Temperature data can be accessed via BLE. #referenceDesign #simple-embedded #espressif #template #reference-design

Sensor using through hole LDR and power with SMT LED Resistors and PZT3904

Tactile Switch SPST-NO Top Actuated Through Hole #CommonPartsLibrary #Switch #Tactile #THT

A simple Simulation of combined AC waveforms fed through a RC filter