DIY BMS using ATTINY841-SSU this hardware has a higher balance current, fuse and TVS diode to help with voltage spikes.
Most importantly, an external crystal to the micro controller (attiny841) which means the device is more reliable in low voltage situations
DIY BMS using ATTINY841-SSU this hardware has a higher balance current, fuse and TVS diode to help with voltage spikes.
Most importantly, an external crystal to the micro controller (attiny841) which means the device is more reliable in low voltage situations
DIY BMS using ATTINY841-SSU this hardware has a higher balance current, fuse and TVS diode to help with voltage spikes.
Most importantly, an external crystal to the micro controller (attiny841) which means the device is more reliable in low voltage situations
This is a Smart Button project embedded with an E-Ink display. It uses an ESP32-PICO-KIT microcontroller and a Cherry MX mechanical switch for input detection. Upon the button press, various information is displayed on the E-Ink screen. #project #Template #projectTemplate
Use this template if you're planning to get your board manufactured in OSHPARK. It has the via min/max and trace width constraints already baked as global rules. #project-template #template #manufacturer-design-rules
The Arduino Nano 33 BLE is an evolution of the traditional Arduino Nano, but featuring a lot more powerful processor, the nRF52840 from Nordic Semiconductors, a 32-bit ARM® Cortex™-M4 CPU running at 64 MHz.
The Arduino Nano 33 BLE is an evolution of the traditional Arduino Nano, but featuring a lot more powerful processor, the nRF52840 from Nordic Semiconductors, a 32-bit ARM® Cortex™-M4 CPU running at 64 MHz.
Basic project template for RP2040 MCU from Raspberry Pi Pico Development board #RaspberryPi #Raspberry #Pi #RPi #Pico #template #project #project-template
Basic project template for RP2040 MCU from Raspberry Pi Pico Development board #RaspberryPi #Raspberry #Pi #RPi #Pico #template #project #project-template