Amplifier IC 2 Channel (Stereo) Class D 32-HTSSOP The TPA3116D2QDADRQ1 is an automotive-grade, high-efficiency Class-D stereo audio power amplifier IC from Texas Instruments. It is designed to drive speakers directly in compact audio systems while maintaining high output power and low heat dissipation. The device is part of the TPA3116-Q1 family, qualified for AEC-Q100 automotive applications, making it suitable for harsh environments such as vehicle infotainment and industrial audio systems. It operates from a single supply and uses advanced Class-D switching architecture to achieve high efficiency (typically >90%), reducing the need for large heat sinks and improving overall system power efficiency. 🔑 Key Features Output power capability Up to 2 × 50 W into 4 Ω (BTL mode at ~21 V) Wide supply voltage range 4.5 V to 26 V single supply operation High efficiency Class-D operation 90% efficiency with low idle power loss Stereo and mono configurations Supports BTL stereo and PBTL mono modes Differential and single-ended inputs Flexible audio input compatibility Advanced protection features Overvoltage protection Undervoltage protection Overtemperature shutdown Short-circuit protection DC detect protection with fault reporting EMI-optimized design Reduced electromagnetic interference for easier system compliance Programmable power limit Helps protect speakers and manage output levels Thermally enhanced 32-pin HTSSOP package Designed for better heat dissipation in compact layouts Typical Applications Automotive infotainment systems Car audio amplifiers Soundbars and home audio systems Portable and powered speakers Industrial audio solutions #commonpartslibrary #integratedcircuit #linearamplifier #audioamplifier

VL53L1X FlightSense™ Light, 3D Time-of-Flight (ToF) Sensor Evaluation Board #commonpartslibrary #devboard #breakoutboard #vl53l1x

CMOS BCD-to-7-Segment LED Latch Decoder Drivers 16-TSSOP -55 to 125 The CD4511BPWR is a CMOS BCD-to-7-segment latch decoder/driver IC from Texas Instruments designed to directly drive common-cathode 7-segment LED displays. It converts a 4-bit BCD (Binary-Coded Decimal) input into the appropriate 7-segment output signals for displaying decimal digits 0–9. The device integrates latch, decode, and display driver functions in a single package, making it suitable for digital clocks, counters, panel meters, calculators, and embedded display systems. Key Features CMOS BCD-to-7-segment latch decoder/driver Directly drives common-cathode LED displays High output source current capability up to 25 mA Built-in input latch for BCD data storage Lamp Test (LT) function for display testing Blanking Input (BI) for display blanking/intensity control Automatically blanks invalid BCD inputs (>1001) Wide operating supply voltage range: 3 V to 18 V Low static power consumption with high noise immunity Compatible with CMOS, NMOS, and TTL logic levels Available in TSSOP-16 package (BPWR variant) #commonpartslibrary #integratedcircuit #leddriver

SMAJ5.0A-Q is an automotive-grade, unidirectional Transient Voltage Suppressor (TVS) diode from Bourns. It is designed to protect sensitive electronic circuits from Electrostatic Discharge (ESD), Electrical Fast Transients (EFT), lightning-induced surges, and other transient overvoltage events. The device is commonly used on 5 V power rails and communication interfaces in automotive, industrial, and telecom applications. Key Features Unidirectional TVS diode for DC line protection. 5 V reverse standoff voltage (VRWM) suitable for 5 V systems. 6.4 V minimum breakdown voltage (VBR). 9.2 V maximum clamping voltage (VC) at peak pulse current. 400 W peak pulse power dissipation (10/1000 μs waveform). 43.5 A peak pulse current (IPP) capability. AEC-Q101 qualified for automotive applications. Fast response time (<1 ps typical) for effective transient suppression. Wide operating temperature range: -55°C to +150°C. Surface-mount DO-214AC (SMA) package for compact PCB designs. RoHS compliant and suitable for automated assembly processes. Typical Applications Automotive ECUs and power rails 5 V power supplies Telecom equipment Industrial control systems I/O ports and communication interfaces Consumer electronics requiring surge protection #CommonPartsLibrary #Diode

Accelerometer X, Y, Z Axis ±2g, 4g, 8g, 16g 0.05Hz ~ 1.6kHz 14-LGA (3x5) The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°. Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds. Tap sensing detects single and double taps in any direction. Free-fall sensing detects if the device is falling. These functions can be mapped individually to either of two interrupt output pins. An integrated memory management system with a 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor activity and lower overall system power consumption. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation. The ADXL345 is supplied in a small, thin, 3 mm × 5 mm × 1 mm, 14-lead, plastic package. ► Ultralow power: as low as 23 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical) ► Power consumption scales automatically with bandwidth ► User-selectable resolution ► Fixed 10-bit resolution ► Full resolution, where resolution increases with g range, up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB scale factor in all g ranges) ► Embedded memory management system with FIFO technology minimizes host processor load ► Single tap/double tap detection ► Activity/inactivity monitoring ► Free-fall detection ► Supply voltage range: 2.0 V to 3.6 V ► I/O voltage range: 1.7 V to VS ► SPI (3- and 4-wire) and I2C digital interfaces ► Flexible interrupt modes mappable to either interrupt pin ► Measurement ranges selectable via serial command ► Bandwidth selectable via serial command ► Wide temperature range (−40°C to +85°C) ► 10,000 g shock survival ► Pb free/RoHS compliant #CommonPartsLibrary #IntegratedCircuit #Sensor #Transducer #Motion-Sensor #Accelerometer #ADXL345

4 Position Wire to Board Terminal Block Horizontal with Board 0.138" (3.50mm) Through Hole The TE Connectivity 284391-4 is a through-hole mounted PCB terminal block designed for wire-to-board power and signal connections in industrial and electronic control applications. The component belongs to the Buchanan series and features a side-entry wire interface with a horizontal mating orientation. The terminal block supports secure screw-clamp wire termination and is intended for reliable field wiring in low-voltage systems. The connector provides four positions with a 3.5 mm pitch and supports wire sizes from 14 AWG to 30 AWG. The housing is manufactured from polyamide PA66 (Nylon 6/6) with a UL94 V-0 flammability rating. Conductive elements are constructed from brass with tin-plated contacts and nickel-plated clamp and screw components to ensure corrosion resistance and electrical reliability. The device is rated for up to 12 A current and 300 V operation and is suitable for PCB-mounted applications requiring compact, stackable terminal connections. The terminal block includes side interlocking capability for modular multi-position expansion. Engineering Specification Component Type: PCB Terminal Block Manufacturer: TE Connectivity AMP Connectors Series: Buchanan Manufacturer Part Number: 284391-4 Connector Configuration: Wire-to-Board Mounting Type: Through Hole Wire Entry Orientation: Horizontal / Side Entry Number of Positions: 4 Number of Levels: Single Level Pitch: 3.50 mm Wire Termination Method: Screw Rising Cage Clamp Supported Wire Gauge: 14 AWG to 30 AWG Screw Thread Size: M3 Recommended Screw Torque: 0.25 Nm (2.2 lb-in) Rated Current: 12 A Rated Voltage: 300 V AC Housing Material: Polyamide PA66 (Nylon 6/6) Housing Color: Green Flammability Rating: UL94 V-0 Contact Material: Brass Contact Plating: Tin Clamp Material: Brass with Nickel Plating Screw Material: Brass with Nickel Plating Feature Set: Side Interlocking Capability Compliance: RoHS Compliant Mounting Orientation: PCB Straight Mount The component shall be used in applications requiring secure PCB-mounted terminal connections with moderate current handling capability and compact spacing. Typical applications include industrial control systems, embedded electronics, instrumentation, automation interfaces, and low-voltage power distribution assemblies. #commonpartslibrary #connector #header