WR-PHD 2.54 mm Pin Header 12 pins, 1 row, straight, gold plating Connector Header Through Hole 12 position 0.100" (2.54mm) Ang 61301211121 ay isang vertical through-hole male pin header connector mula sa Würth Elektronik under ng WR-PHD series. Ito ay isang 12-position, 2.54 mm pitch unshrouded header na karaniwang ginagamit para sa board-to-board at wire-to-board connections sa embedded at industrial electronics. Key Features 12-position single-row male pin header 2.54 mm (0.1") standard pitch Through-hole vertical mounting Gold-plated copper alloy contacts Unshrouded design 3 A current rating 250 V voltage rating UL94 V-0 flame-retardant housing Operating temperature: −40 °C to +105 °C Compatible for board-to-board or cable interconnect applications Solder termination type #CommonPartsLibrary #Connector

I-PEX MHF4 Connector Receptacle, Male Pin 50 Ohms Surface Mount Solder The 20449-001E-03 is an ultra-miniature MHF4 RF coaxial receptacle connector from I-PEX designed for high-frequency wireless applications such as Wi-Fi, Bluetooth, LTE, GNSS, and cellular antenna connections in compact electronic devices. It is a surface-mount RF connector optimized for miniature coaxial cable assemblies and high-density PCB layouts. Key Features Ultra-small MHF4 RF coaxial receptacle Supports frequencies up to 9 GHz Characteristic impedance: 50 Ω Surface-mount (SMT) PCB mounting Snap-on mating mechanism Compact footprint for space-constrained designs Gold-plated center contact for improved conductivity and corrosion resistance Uses: MHF4 compatible RF cables and antenna assemblies High-reliability micro RF interconnect Operating temperature: −40°C to +90°C Rated voltage: 60 V Approximate mating cycle rating: 30 cycles Constructed with: Brass contacts LCP (Liquid Crystal Polymer) dielectric material RoHS compliant Typical Applications Wi-Fi modules LTE/5G modules GNSS/GPS antennas Bluetooth devices IoT devices Embedded wireless systems Compact handheld electronics RF communication modules

IC RF TxRx + MCU Bluetooth Bluetooth v5.3 2.4GHz 48-VFQFN Exposed Pad NRF52832-QFAA-R7 is an ultra-low-power wireless System-on-Chip (SoC) from Nordic Semiconductor, designed for Bluetooth Low Energy (BLE), ANT, NFC, and proprietary 2.4 GHz wireless applications. It integrates a high-performance ARM Cortex-M4F processor, memory, peripherals, and a 2.4 GHz radio into a single chip, making it ideal for IoT devices, wearables, wireless sensors, beacons, and smart peripherals. GHz protocols • 2.4 GHz transceiver • -96 dBm sensitivity in Bluetooth® low energy mode • Supported data rates: 1 Mbps, 2 Mbps Bluetooth® low energy mode • -20 to +4 dBm TX power, configurable in 4 dB steps • On-chip balun (single-ended RF) • 5.3 mA peak current in TX (0 dBm) • 5.4 mA peak current in RX • RSSI (1 dB resolution) • ARM® Cortex®-M4 32-bit processor with FPU, 64 MHz • 215 EEMBC CoreMark® score running from flash memory • 58 μA/MHz running from flash memory • 51.6 μA/MHz running from RAM • Data watchpoint and trace (DWT), embedded trace macrocell (ETM), and instrumentation trace macrocell (ITM) • Serial wire debug (SWD) • Trace port • Flexible power management • 1.7 V–3.6 V supply voltage range • Fully automatic LDO and DC/DC regulator system • Fast wake-up using 64 MHz internal oscillator • 0.3 μA at 3 V in System OFF mode • 0.7 μA at 3 V in System OFF mode with full 64 kB RAM retention • 1.9 μA at 3 V in System ON mode, no RAM retention, wake on RTC • Memory • 512 kB flash/64 kB RAM • 256 kB flash/32 kB RAM • Nordic SoftDevice ready • Support for concurrent multi-protocol • Type 2 near field communication (NFC-A) tag with wakeup-on-field and touchto-pair capabilities • 12-bit, 200 ksps ADC - 8 configurable channels with programmable gain • 64 level comparator • 15 level low power comparator with wakeup from System OFF mode • Temperature sensor • 32 general purpose I/O pins • 3x 4-channel pulse width modulator (PWM) unit with EasyDMA • Digital microphone interface (PDM) • 5x 32-bit timer with counter mode • Up to 3x SPI master/slave with EasyDMA • Up to 2x I2C compatible 2-wire master/slave • I2S with EasyDMA • UART (CTS/RTS) with EasyDMA • Programmable peripheral interconnect (PPI) • Quadrature decoder (QDEC) • AES HW encryption with EasyDMA • Autonomous peripheral operation without CPU intervention using PPI and EasyDMA • 3x real-time counter (RTC) • Single crystal operation • Package variants • QFN48 package, 6 × 6 mm • WLCSP package, 3.0 × 3.2 mm #CommonPartsLibrary #IntegratedCircuit

CONN HEADER SMD R/A 3POS 1.25mm The SM03B-GHS-TB(LF)(SN) is a 3-pin, surface-mount, right-angle header connector that mates with JST GH-series wire housings. It provides a reliable, low-profile connection between a PCB and external wires using a crimp-style mating system. It belongs to the JST GH series, known for fine-pitch, compact connectors optimized for miniaturized electronics. 3-position connector (signal/power lines) 1.25 mm pitch for high-density PCB layout Surface-mount, right-angle (horizontal) mounting Shrouded header design for secure mating and alignment Locking ramp mechanism to prevent accidental disconnection Tin-plated contacts for reliable conductivity Lead-free / RoHS compliant (LF/SN finish) Current rating: ~1 A typical Voltage rating: ~50 V Operating temperature: approx. -25 °C to +85 °C 📦 Typical Applications Consumer electronics (wearables, IoT devices) Industrial control modules Robotics and sensor interfaces Battery-powered embedded systems Compact PCB interconnect systems #CommonPartsLibrary #Connector

Connector Header Through Hole 6 position 0.100" Pin Header 1x06 2.54mm PinHeader 1x6 2.54mm The TSW-106-07-G-S is a through-hole vertical header designed for board-to-board and board-to-wire interconnection in electronic systems. It is part of a precision connector series known for high reliability, consistent mechanical alignment, and excellent electrical performance. The component is commonly used in applications requiring modular connectivity, prototyping flexibility, and secure signal routing between printed circuit boards or peripheral interfaces. Its design supports repeated mating cycles while maintaining stable contact integrity, making it suitable for both development and production environments. Functional Description This component functions as a single-row header that provides a direct electrical interface between a printed circuit board and a mating connector or cable assembly. It enables straightforward signal or power routing through plated pins that are soldered into the PCB. The vertical orientation allows perpendicular mating, supporting compact and efficient board layouts. The connector is designed to ensure proper alignment and retention during mating, reducing the risk of intermittent connections. Electrical Characteristics The header supports low-voltage signal transmission and moderate current levels typical of board-level interconnects. It offers low contact resistance to maintain signal integrity and efficient current flow. The contact system is designed to provide consistent electrical performance across repeated insertions, ensuring reliability in both signal and power applications. Mechanical Characteristics The component features a robust insulating housing that maintains pin alignment and structural integrity during handling and operation. The contact pins are fabricated from conductive material and plated to enhance durability, conductivity, and مقاومت to corrosion. The through-hole mounting style provides strong mechanical anchoring to the printed circuit board, improving resistance to mechanical stress and vibration. The design supports reliable mating with compatible connectors and ensures long service life. Environmental Characteristics The TSW-106-07-G-S is constructed using materials that provide stable performance under typical environmental conditions encountered in electronic assemblies. It is designed to withstand standard temperature ranges and environmental stresses such as humidity and mechanical handling, maintaining electrical and mechanical reliability over time. Applications This header is widely used in embedded systems, industrial electronics, development platforms, communication equipment, and general-purpose PCB interconnect applications. It is especially suited for designs requiring modular connectivity, easy assembly, and dependable signal transfer. Summary The TSW-106-07-G-S from Samtec is a reliable through-hole header solution that combines mechanical durability with stable electrical performance. Its straightforward design, compatibility with standard interconnect systems, and suitability for a wide range of applications make it a common choice for board-level connectivity in modern electronic designs. #CommonPartsLibrary #Connector #Header #TSW

CONN HEADER TH 8POS 2.5mm 2.54mm-8P ZZ is a through-hole wire-to-board header connector from the XH-style connector family. It features a single-row 8-position configuration with approximately 2.5 mm pitch spacing, making it suitable for power and signal connections in consumer electronics, industrial controls, LED modules, battery systems, and embedded electronics. The connector is designed for PCB mounting and provides a reliable, low-cost interconnect solution for cable assemblies. Key Features Single-row 8-position (1×8) connector 2.5 mm / 2.54 mm pitch wire-to-board interface Through-hole PCB mounting Compatible with XH-series style housings Rated up to 3 A current Rated up to 250 V Tin-plated brass contacts for reliable conductivity UL94V-0 flame-retardant housing material Operating temperature range: -25°C to +85°C Suitable for power distribution and signal connections in electronic equipment Hashtags #Connector #WireToBoard #XHConnector #2_54mmPitch #ThroughHole #PCBConnector #8PinConnector #ElectronicComponents #Interconnect #EmbeddedSystems #IndustrialElectronics #PowerConnector #SignalConnector #RoHSCompliant

PM254-2-10-Z-8.5 is a through-hole pin header connector designed for reliable board-to-wire or board-to-board interconnection in electronic and embedded systems. The connector features a durable thermoplastic housing with metal contact terminals engineered for stable electrical conductivity, mechanical strength, and long-term reliability in industrial and consumer electronic applications. This connector series is commonly used in power distribution, signal routing, module interfacing, and PCB expansion applications where secure and removable connections are required. Its standardized pin spacing and vertical mounting configuration support compatibility with a wide range of mating connectors, jumper systems, and cable assemblies. The PM254-2-10-Z-8.5 connector is suitable for automated assembly processes and provides dependable performance in embedded controllers, development boards, industrial automation equipment, communication systems, and general-purpose electronic hardware. The robust contact structure ensures stable connectivity under repeated insertion cycles and varying environmental conditions. #commonpartslibrary #connector #pinheader #interconnect #throughhole #embeddedhardware #electronicscomponents #pcbdesign #industrialelectronics #boardtoboardconnector

77 (55 + 22 Ground) Position Header, Male Pins Connector 0.079" (2.00mm) Through Hole The 5106081‑1 is a high-reliability male PCB connector manufactured by TE Connectivity. It belongs to the Z‑PACK 2 mm HM Series, designed for mezzanine and backplane board-to-board interconnects. The connector features precision-machined phosphor bronze contacts with tin plating, ensuring consistent electrical conductivity, low contact resistance, and long-term reliability. The device has a through-hole press-fit termination style for robust mechanical attachment to printed circuit boards and optimal compatibility with automated assembly processes. Its vertical orientation and standardized 2 mm pitch allow compact, high-density PCB layouts while maintaining reliable alignment and mating with compatible female headers. The connector is engineered to support repeated insertion cycles, high signal integrity, and consistent electrical performance in industrial, telecommunications, and embedded electronic applications. General Description The 5106081‑1 is a durable, 77-position male PCB connector intended for high-density board-to-board interconnect solutions. It provides secure electrical connections, mechanical stability, and long-term reliability in demanding electronic systems. Widely used in industrial automation, telecommunications, and embedded computing, this connector ensures precise mating, easy PCB integration, and robust operation in backplane and mezzanine applications. Its press-fit through-hole design, reliable contact material, and standardized footprint make it a versatile solution for complex multi-board electronic assemblies. #TEConnectivity #PCBConnector #MaleHeader #BoardToBoard #ZPACK #2mmPitch #HighDensityInterconnect #ThroughHole #PressFit #IndustrialElectronics #Telecommunications #EmbeddedSystems #ElectricalEngineering #ReliableConnection #EngineeringSpec #ElectronicConnector #HighPerformanceConnector

Headers & Wire Housings PICOFLEX 10P HDR LOPRO SN Connector Header Through Hole 10 position 0.050" (1.27mm) The 0903250010 is a 10-position vertical through-hole header connector from the Picoflex PF-50 series by Molex. It features a 1.27 mm pitch, straight orientation, and is designed for reliable board-to-cable interconnections in compact electronic equipment. The connector is commonly used with Picoflex ribbon cable assemblies in industrial, consumer, telecommunications, and embedded electronic applications. It provides a space-saving solution while maintaining dependable electrical and mechanical performance. Key Features 10 contacts (single-row configuration) 1.27 mm (0.050") contact pitch Vertical (straight) through-hole mounting Male header design Compatible with Molex Picoflex cable connectors Current rating up to 1.2 A per contact Voltage rating up to 250 V Operating temperature range: -40°C to +105°C Low contact resistance (15 mΩ max) High insulation resistance (1000 MΩ min) RoHS compliant Compact footprint for high-density PCB designs Suitable for signal and low-power applications #CommonPartsLibrary #0903250010 #Molex #Picoflex #Connector #HeaderConnector #ThroughHole #PCBConnector #BoardToCable #Interconnect #Electronics #EmbeddedSystems #IndustrialElectronics #RibbonCable #1_27mmPitch #ElectronicComponents

16 Position Header Spacer Connector 0.079" (2.00mm) Gold Through Hole TW-08-02-L-D-185-100 is a 16-position, dual-row board-to-board stacking header from the Samtec TW series. Designed for elevated board stacking applications, it features a 2.00 mm pitch, a 0.185" (4.70 mm) stack height, and gold-plated contacts for reliable electrical performance. The connector uses a through-hole mounting style with solder termination and is suitable for embedded systems, industrial controls, communications equipment, and other high-density PCB interconnect applications. Its flexible stacking architecture allows designers to achieve custom board spacing while maintaining mechanical stability and signal integrity. Key Features 16-position (2 × 8) dual-row board stacking header 2.00 mm (0.079") contact pitch 0.185" (4.70 mm) board stack height Through-hole mounting with solder termination Gold-plated contacts for enhanced durability and conductivity Black insulating housing Flexible board-to-board stacking design Suitable for elevated PCB stacking applications High-speed performance capability up to 8 Gbps within the TW family Reliable mechanical and electrical connection for embedded and industrial systems #Samtec #BoardToBoardConnector #StackingHeader #PCBConnector #Interconnect #EmbeddedSystems #IndustrialElectronics #ElectronicsDesign #ThroughHoleConnector #TWSeries

Connector Header Surface Mount 12 position 0.049" (1.25mm) 53398-1271 The 0533981271 is a board-to-wire connector assembly component designed to provide a reliable electrical and mechanical interface between a printed circuit board and discrete wire harnesses. It belongs to a compact connector system intended for applications requiring secure mating, efficient signal transmission, and ease of assembly. The component is engineered to support consistent electrical contact performance while maintaining a small footprint suitable for space-constrained designs. Its construction ensures dependable connectivity under typical operating conditions encountered in consumer electronics, industrial equipment, and embedded systems. Functional Description This connector component serves as part of a modular interconnect system, enabling termination of wires and subsequent mating to a corresponding board-mounted header. It provides stable retention and alignment during mating and unmating operations, ensuring consistent electrical continuity. The design supports straightforward integration into automated or manual assembly processes, facilitating efficient production workflows. Contact geometry and housing features are optimized to maintain reliable engagement and minimize the risk of intermittent connections. Electrical Characteristics The component is designed to support low-voltage signal and power transmission in compact electronic systems. It provides low contact resistance to ensure efficient current flow and stable signal integrity. Insulation materials are selected to maintain dielectric performance and prevent leakage under normal operating conditions. The connector system is suitable for typical electronic applications where consistent and reliable electrical performance is required. Mechanical Characteristics The connector features a durable housing constructed from engineered thermoplastic material, providing mechanical strength and resistance to environmental stress. Contact elements are formed from conductive alloys and finished to enhance conductivity and corrosion resistance. The design includes features that promote secure mating retention and proper alignment, reducing wear and ensuring longevity over repeated use. Its compact form factor supports high-density layouts on printed circuit boards. Environmental Characteristics The component is designed to operate reliably within standard environmental conditions encountered in electronic equipment. Materials used in the housing and contacts are selected for thermal stability and resistance to common environmental factors such as humidity and mechanical vibration. The connector system maintains performance over typical temperature ranges associated with consumer and industrial applications. Applications This connector is intended for use in electronic systems requiring compact and reliable wire-to-board interconnection. Common applications include consumer devices, industrial control systems, embedded modules, and communication equipment where dependable signal or power connectivity is essential. Summary The 0533981271 from Molex is a compact and reliable connector solution for board-to-wire applications. It offers consistent electrical performance, robust mechanical design, and ease of integration, making it well suited for modern electronic assemblies requiring dependable interconnect solutions. #commonpartslibrary #connector #header

System On Chip (SOC) IC It integrates multiple processing units including CPUs, DSPs, AI accelerators, and GPU into a single chip to handle vision processing, deep learning, sensor fusion, and real-time control in automotive and industrial systems. • C7x floating point, vector DSP, up to 1.0GHz, 80 GFLOPS, 256 GOPS • Deep-learning matrix multiply accelerator (MMA), up to 8 TOPS (8b) at 1.0GHz • Vision Processing Accelerators (VPAC) with Image Signal Processor (ISP) and multiple vision assist accelerators • Depth and Motion Processing Accelerators (DMPAC) • Dual 64-bit Arm® Cortex®-A72 microprocessor subsystem at up to 2.0GHz – 1MB shared L2 cache per dual-core Cortex®- A72 cluster – 32KB L1 DCache and 48KB L1 ICache per Cortex®-A72 core • Six Arm® Cortex®-R5F MCUs at up to 1.0GHz – 16K I-Cache, 16K D-Cache, 64K L2 TCM – Two Arm® Cortex®-R5F MCUs in isolated MCU subsystem – Four Arm® Cortex®-R5F MCUs in general compute partition • Two C66x floating point DSP, up to 1.35GHz, 40GFLOPS, 160GOPS • 3D GPU PowerVR® Rogue 8XE GE8430, up to 750MHz, 96GFLOPS, 6Gpix/sec • Custom-designed interconnect fabric supporting near max processing entitlement Memory subsystem: • Up to 8MB of on-chip L3 RAM with ECC and coherency – ECC error protection – Shared coherent cache – Supports internal DMA engine • External Memory Interface (EMIF) module with ECC – Supports LPDDR4 memory types – Supports speeds up to 4266MT/s – 32-bit data bus with inline ECC • General-Purpose Memory Controller (GPMC) • 512KB on-chip SRAM in MAIN domain, protected by ECC #CommonPartsLibrary #IntegratedCircuit

8 Position FFC, FPC Connector Contacts, Bottom 0.039" (1.00mm) Surface Mount, Right Angle The Molex Easy-On connector is a compact surface-mount FPC/FFC interconnect solution designed for reliable board-to-cable connections in space-constrained electronic systems. Featuring a bottom-contact configuration with a flip-lock actuator, it provides secure retention of flexible printed circuits while supporting repeated insertion and removal cycles. Its low-profile construction and robust locking mechanism make it suitable for consumer electronics, industrial controls, embedded systems, displays, and portable devices where dependable signal transmission and compact form factors are required. Engineering Specifications Manufacturer: Molex Series: Easy-On FD19 Part Number: 2005280080 Connector Type: FFC/FPC Connector Contact Configuration: Bottom Contact Actuator Type: Flip-Lock ZIF Mounting Style: Surface Mount Orientation: Right Angle Circuit Count: Eight Positions Pitch: One Millimeter Cable Type: Flexible Flat Cable / Flexible Printed Circuit Contact Material: Copper Alloy Contact Finish: Gold over Nickel Housing Material: High-Temperature Thermoplastic Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Halogen Free: Yes Application Areas: LCD Interfaces, Touch Panels, Embedded Electronics, Industrial Equipment, Portable Devices, Consumer Electronics #Molex #EasyOn #FD19 #FFCConnector #FPCConnector #FlipLock #BottomContact #ZIFConnector #SMTConnector #ElectronicComponents #Interconnect #PCBDesign #EmbeddedSystems #DisplayInterface #IndustrialElectronics

Connector Header Surface Mount 20 position 0.100" (2.54mm) The 3020-20-0300-00 is a shrouded rectangular male header connector manufactured by CNC Tech for board-to-cable interconnection applications. It features a dual-row, surface-mount design with a standard 2.54 mm pitch, making it suitable for signal and low-power connections in industrial, consumer, and embedded electronic systems. The connector incorporates gold-plated brass contacts for reliable electrical performance and a high-temperature nylon housing that provides excellent mechanical durability and insulation characteristics. The integrated keying slot and fully shrouded construction help ensure proper mating orientation and secure connections during assembly and operation. Key Features Dual-row male header connector Surface-mount (SMT) termination Standard 2.54 mm contact pitch 20-position configuration Shrouded four-wall housing for mating protection Integrated keying slot for polarization Gold-plated contact surfaces for improved conductivity and corrosion resistance Brass contact material for mechanical strength High-temperature PA9T nylon insulator UL94 V-0 flame-retardant housing material Operating temperature range suitable for industrial environments Board-to-cable/wire interconnection design Square contact geometry for reliable mating RoHS-compliant construction Rated for up to 3 A current per contact under specified conditions #CommonPartsLibrary #Connector #Header #MaleHeader #SMT #BoardToCable #CNCTech #Interconnect #ShroudedHeader #2p54mmPitch #Electronics #EmbeddedSystems #3020_20_0300_00

2 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole ## Engineering Specification ## General Description The **1726040** is a Phoenix Contact **MKKDSN series PCB terminal block** designed for wire-to-board electrical connections in printed circuit board assemblies. It is used to provide a secure screw-clamp interface between external wiring and PCB circuitry. The component is suitable for control systems, industrial electronics, power distribution circuits, automation equipment, and general electronic assemblies requiring reliable field wiring termination. ## Device Identification Manufacturer Part Number: **1726040** Manufacturer: **Phoenix Contact** Product Series: **MKKDSN** Device Category: **Connector and Interconnect Component** Device Type: **PCB Terminal Block** Connection Type: **Wire-to-Board Terminal Block** Mounting Type: **Through-Hole PCB Mount** Termination Method: **Screw Connection** ## Functional Description The device functions as a fixed printed circuit board terminal block that allows external conductors to be connected directly to a PCB. The screw-clamp mechanism secures the wire mechanically and electrically, providing a stable connection for signal or power circuits. The terminal block is intended for applications where field wiring must be removable, serviceable, and mechanically secure. ## Mechanical Description The component uses a compact green housing suitable for PCB-mounted assemblies. It is designed for side-entry conductor connection and horizontal board installation. The terminal block construction supports organized wire routing and convenient access for installation, maintenance, and service work. ## Electrical Description The terminal block is intended for low-voltage power and signal applications within the manufacturer’s specified current and voltage ratings. It provides reliable conductor contact when properly installed with compatible wire sizes and appropriate tightening torque. ## Material and Contact Description The connector housing is typically made from insulating material suitable for electrical safety and PCB assembly use. The internal conductive elements provide the electrical path between the inserted wire and the soldered PCB connection. Proper conductor preparation and screw tightening are required to maintain stable electrical performance. ## Mounting and Assembly Description The component is intended for through-hole solder mounting on a printed circuit board. Proper PCB hole sizing, pad layout, soldering process control, and mechanical clearance should be followed according to the manufacturer’s recommended design and assembly guidance. The terminal block should be mounted in a position that allows safe wire insertion and screw access. ## Application Suitability The **1726040** is suitable for industrial control boards, automation equipment, interface modules, power supply circuits, instrumentation, building control systems, relay boards, sensor wiring interfaces, and other electronic products requiring secure PCB wire termination. ## Design Considerations The design should account for wire gauge compatibility, current rating, voltage rating, tightening torque, creepage and clearance requirements, solder joint strength, and accessibility for field wiring. The terminal block should not be used beyond the manufacturer’s specified electrical, thermal, and mechanical limits. ## Hashtags #commonpartslibrary #terminalblock #pcbterminalblock #phoenixcontact #mkkdsn #wiretoboard #connector #interconnect #fixedterminalblock #screwterminal #throughholecomponent #pcbmount #industrialelectronics #automationequipment #controlsystems #powerdistribution #fieldwiring #electronicscomponents #electronicparts #hardwaredesign #pcbdesign #engineeringparts #componentlibrary #electronicsengineering

Jack Modular Connector 6p6c (RJ11, RJ12, RJ14, RJ25) 90° Angle (Right) Shielded Cat5 The 615006141121 is a board-to-board or wire-to-board connector component designed for reliable electrical interconnection in electronic assemblies. It is typically used in compact PCB layouts where secure mating, consistent contact performance, and durability are required. This connector is suited for applications in consumer electronics, industrial equipment, and embedded systems, offering dependable signal and power transmission. Key Features: Compact connector design for space-constrained applications High-reliability contact interface Designed for PCB mounting ապահով secure mating and retention Suitable for signal and low-power connections Mechanical Characteristics: Mounting Type: Through-hole or surface-mount (depending on variant) Orientation: Vertical or right-angle configuration Contact Configuration: Multi-position connector Pitch: Standard fine-pitch spacing typical for board-level connectors Housing Material: High-temperature thermoplastic Contact Material: Copper alloy with plated finish Electrical Characteristics: Contact Resistance: Low contact resistance for stable signal integrity Insulation Resistance: High insulation resistance Rated Voltage: Suitable for low-voltage applications Current Rating: Designed for signal-level or moderate current carrying Environmental Characteristics: Operating Temperature Range: Suitable for standard industrial temperature ranges RoHS Compliance: Yes Durability: Designed for multiple mating cycles Applications: Embedded systems Consumer electronics Industrial control boards Communication devices PCB interconnect solutions #commonpartslibrary #connector #jackmodular

USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Plug Connector 24 Position Board Edge, Surface Mount; Through Hole, Right Angle Global Connector Technology (GCT) USB4155-03-C is a USB Type-C Plug Connector designed for USB 3.2 Gen 2 (USB 3.1 Gen 2 SuperSpeed+) high-speed data applications. It is a right-angle, horizontal SMT connector with a 24-contact configuration, suitable for PCB edge mounting. The connector supports high-speed signal transmission, power delivery, and durable mechanical connection for embedded systems, portable devices, and consumer electronics. Key Features: Connector Type: USB Type-C Plug Connector USB Standard: USB 3.2 Gen 2 / USB 3.1 Gen 2 SuperSpeed+ Number of Contacts: 24 positions Mounting Type: Surface Mount Technology (SMT), right-angle horizontal PCB mounting Data Transfer Rate: Supports high-speed USB 3.2 Gen 2 communication (up to 10 Gbps) Current Rating: Up to 5 A for power delivery applications Voltage Rating: Up to 48 VDC Durability: Rated for approximately 10,000 mating cycles Shielding: Metal shielded housing for EMI protection Contact Finish: Gold-plated contacts for reliable conductivity Operating Temperature: -30°C to +85°C Application: Embedded systems, laptops, tablets, mobile devices, storage devices, and USB-C interface boards Component Classification: Category: Connector / Interconnect Component Subcategory: USB Type-C Connector Not an IC or semiconductor component PCB Footprint Required: Yes Mechanical Part: No (it is an electromechanical connector with soldered electrical terminals) #CommonPartsLibrary #Connector #USBTypeC #USBConnector #USB32Gen2 #USB31Gen2 #SuperSpeedPlus #GCT #BoardMountConnector #SMTConnector #HighSpeedInterface #PCBDesign #ElectronicComponents #InterconnectTechnology

8 Position Card Connector Micro SIM Surface Mount, Right Angle Gold ## Engineering Specification ## General Description The **693022010811** is a Würth Elektronik **WR-CRD Micro SIM card connector** designed for compact electronic devices requiring secure SIM card retention and reliable board-level electrical connection. It is intended for surface-mount printed circuit board assembly and is suitable for communication modules, wireless devices, embedded systems, IoT hardware, and networking equipment. The connector uses a hinged lid mechanism to hold the Micro SIM card in place during operation. ## Device Identification Manufacturer Part Number: **693022010811** Manufacturer: **Würth Elektronik** Product Series: **WR-CRD** Device Category: **Connector and Interconnect Component** Device Type: **Micro SIM Card Connector** Connector Style: **Hinge Type** Mounting Type: **Surface Mount, Right Angle** ## Functional Description The device functions as a board-mounted Micro SIM card interface. It provides mechanical retention and electrical contact between the SIM card and the host printed circuit board. The hinged lid design allows the SIM card to be placed into the connector and secured during operation, helping maintain contact stability in compact electronic assemblies. ## Mechanical Description The connector is designed with a low-profile surface-mount construction suitable for space-constrained PCB layouts. It uses a hinged card-retention mechanism and is intended for horizontal or right-angle card installation. The mechanical structure supports reliable insertion, retention, and removal of the Micro SIM card during normal use. ## Electrical Description The connector is intended for signal-level SIM card interface applications. It provides multiple gold-plated contact positions for stable electrical connection between the SIM card and the host circuit. The device should be used within the manufacturer’s specified voltage, current, contact resistance, and insulation limits. ## Material and Contact Description The connector uses copper alloy contacts with gold plating for reliable signal transfer and corrosion resistance. The housing and mechanical retention structure are designed for surface-mount assembly and repeated card handling within the rated operating conditions. ## Mounting and Assembly Description The component is suitable for automated surface-mount PCB assembly. Proper land pattern design, soldering profile control, and mechanical clearance should be followed according to the manufacturer’s recommended layout and assembly guidance. The PCB design should provide stable grounding, correct pad alignment, and adequate clearance for SIM card insertion and lid operation. ## Application Suitability The **693022010811** is suitable for cellular communication devices, IoT modules, wireless routers, embedded modems, tracking systems, smart meters, industrial communication equipment, portable electronics, and other products requiring a Micro SIM card interface. ## Design Considerations The connector should be placed in an accessible area of the PCB to allow SIM card installation and removal. Designers should avoid excessive mechanical stress on the hinged lid, improper solder joint loading, contamination of the contact area, and operation beyond the specified environmental and electrical ratings. ## Hashtags #commonpartslibrary #connector #simconnector #microsimconnector #wurthelektronik #wrcrd #cardconnector #memoryconnector #interconnect #pcbconnector #surfacemount #rightangleconnector #smtcomponent #goldplatedcontacts #embeddedhardware #iotdevices #wirelessmodules #communicationdevices #networkingequipment #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #componentlibrary #engineeringparts #electronicsengineering

100 Position Connector Receptacle, Center Strip Contacts Surface Mount Gold The DF40C-100DS-0.4V(51) is a board-to-board and board-to-FPC receptacle connector manufactured by Hirose Electric. It belongs to the DF40 series, a family of fine-pitch stacking connectors intended for compact, high-density interconnect applications such as mobile devices, cameras, wearables, and other space-constrained electronics. The connector functions as the receptacle (socket) half of a mating pair, designed to stack with a corresponding DF40 plug header to join two printed circuit boards, or a printed circuit board and a flexible printed circuit, in a low-profile vertical arrangement. This particular part number represents the full-position, low-profile variant within the series, configured without a reinforcing metal fitting and without a locating boss or mechanical holddown feature, meaning it relies on the contact array itself rather than additional structural hardware for mechanical retention during reflow and handling. The connector is supplied in straight, surface-mount form and is non-polarized, so it can be inserted in either orientation relative to its mating counterpart. Contacts are arranged in parallel rows along the connector body, with gold plating in the contact mating area to ensure reliable signal continuity and resistance to oxidation over repeated use. The series is positioned by Hirose as a general-purpose, high-speed-capable interconnect, suitable for a range of differential and single-ended signaling standards used in consumer and industrial electronics, with the broader DF40 family supporting interfaces such as USB, MIPI, SATA, and PCIe. Its low stacking height and fine contact pitch make it well suited to applications where board-to-board spacing must be minimized, such as camera modules, display modules, or stacked daughterboard architectures in handheld and wearable products. The connector is packaged on embossed carrier tape for automated pick-and-place assembly, and its construction is compliant with RoHS material restrictions. Mechanically, the connector body is built to support repeated mating cycles typical of consumer electronics assembly and rework, while maintaining stable electrical contact under vibration and thermal cycling across its rated environmental range. As a stacking-style connector rather than a card-edge or cable-mount type, it is intended to be soldered directly to a host PCB pad pattern, with the mating plug soldered to the corresponding board or FPC, allowing the two assemblies to be joined and separated as needed during manufacturing, test, or service operations. Spec Sheet Identification Part Number: DF40C-100DS-0.4V(51) Series: DF40 Variant: "C" type — without reinforcing metal fitting Connector Type / Configuration Type: Receptacle (socket), board-to-board / board-to-FPC Gender: Female Orientation: Straight Row Arrangement: Dual row Polarization: Non-polarized Locking/Retention Feature: None (no metal holddown or locating boss) Electrical Ratings Current Rating: Low-current signal class Voltage Rating: Standard signal-level rating typical of fine-pitch board-to-board connectors Applicable High-Speed Protocols: USB, MIPI, SATA, PCIe (series capability) Transmission Rate: High-speed, multi-gigabit class (series capability) Mechanical Specifications Contact Pitch: Fine pitch Mounting Pitch: Matches contact pitch Stacking/Mated Height: Low-profile Mounting Method: Surface mount technology (SMT) Mating Cycles: Rated for repeated mate/unmate cycles typical of consumer electronics rework Contact & Material Properties Contact Material: Phosphor bronze Contact Plating (Mating Area): Gold Insulator Color: Black Insulator Material: High-temperature engineering resin suitable for SMT reflow Environmental Ratings Operating Temperature Range: Extended consumer/industrial range RoHS Compliance: Yes Packaging Packaging Format: Embossed carrier tape, reel format Packaging Code Meaning: Suffix denotes embossed tape packaging at a standard reel quantity Mating Compatibility Mates With: Corresponding DF40 series plug/header connector Application Note: Intended for mezzanine-style stacking between two PCBs or between a PCB and FPC #DF40 #Hirose #HiroseElectric #BoardToBoard #BoardToFPC #StackingConnector #CommonPartsLibrary #Connector #SMTConnector #FinePitchConnector #MezzanineConnector #ElectronicComponents #PCBDesign #HardwareEngineering #ConnectorDatasheet #EngineeringSpec #ConsumerElectronics #HighSpeedConnector #RoHSCompliant #ComponentLibrary

16 Position Receptacle Connector 0.100" (2.54mm) Through Hole, Right Angle Tin The SSQ-108-02-T-D-RA is a dual-row, right-angle female socket connector manufactured by Samtec. It is designed for board-to-board or wire-to-board interconnections in through-hole mounting applications. This connector features a 2.54 mm pitch with high-reliability contact systems, making it suitable for prototyping, embedded systems, and industrial electronics. The right-angle configuration enables horizontal mating, optimizing space in compact PCB layouts. Key Features Dual-row female socket strip Right-angle orientation for horizontal mating Standard 2.54 mm pitch spacing Through-hole mounting for secure PCB attachment High-reliability phosphor bronze contacts Gold-plated contact area for improved conductivity and corrosion resistance Black thermoplastic housing (UL94V-0 rated) Mechanical Specifications Number of Positions: 16 (2 × 8 configuration) Pitch: 2.54 mm Row Spacing: 2.54 mm Mounting Type: Through-hole Orientation: Right-angle Contact Type: Female socket Mating Post Length Compatibility: Standard 0.64 mm square posts Electrical Specifications Current Rating: Typically up to 3 A per contact Voltage Rating: Typically up to 500 VAC Contact Resistance: Low contact resistance for signal integrity Insulation Resistance: High insulation resistance Material Specifications Contact Material: Phosphor bronze Contact Plating: Gold over nickel Housing Material: Thermoplastic (UL94V-0 compliant) Environmental Specifications Operating Temperature Range: Suitable for industrial temperature ranges RoHS Compliant: Yes Lead-Free: Yes Applications PCB interconnect systems Embedded and control systems Prototyping and development boards Industrial and consumer electronics #commonpartslibrary #connector