Power Management IC for iMX8M 5V 6A 6 Buck + 5 LDO The PCA9450CHNY is a highly integrated Power Management Integrated Circuit (PMIC) from NXP Semiconductors, specifically designed to power the i.MX 8M family of application processors, particularly the i.MX 8M Plus. It integrates multiple high-efficiency DC-DC buck converters, LDO regulators, power sequencing logic, load switching, voltage monitoring, and system control functions into a single device. The PCA9450C variant features a configurable dual-phase 6 A buck regulator for powering high-current processor cores while supporting Dynamic Voltage Scaling (DVS) for optimized power efficiency. Key Features Six high-efficiency switching regulators (Buck converters) PCA9450C variant supports a configurable 6 A dual-phase buck regulator Three 3 A buck regulators with Dynamic Voltage Scaling (DVS) Remote-sense capability on major buck outputs for IR-drop compensation Five integrated LDO regulators Supports DDR4, LPDDR4, and DDR3L memory configurations 400 mA load switch with active discharge Dual-channel logic level translator Integrated 32.768 kHz crystal oscillator driver Fast-mode Plus (Fm+) 1 MHz I²C interface Programmable power sequencing and voltage control Power ON/OFF and Standby/Run mode control inputs Protection features including UVLO, thermal shutdown, fault monitoring, and soft-start Operating temperature range: −40°C to +105°C 56-pin HVQFN package (7 mm × 7 mm, 0.4 mm pitch) Optimized for i.MX 8M Mini, Nano, and Plus processors, especially the i.MX 8M Plus for the PCA9450C variant. #CommonPartsLibrary #PCA9450CHNY #PCA9450C #NXP #PMIC #PowerManagementIC #PowerSupply #VoltageRegulator #BuckConverter #LDO #DynamicVoltageScaling #DVS #IMX8M #IMX8MPlus #EmbeddedSystems #IndustrialElectronics #PowerManagement #HVQFN56 #Semiconductor #IntegratedCircuit #IC #CommonPartsLibrary #ElectronicsDesign #HardwareDesign #PCBDesign #EmbeddedLinux #IoT #ProcessorPowerManagement #PowerSequencing #SystemPower #NXPSemiconductors

15µH Shielded Drum Core, Wirewound Inductor 5.45 A 25.8mOhm Max Nonstandard The 7447798151 is a 15 µH shielded wirewound drum core inductor optimized for high current power applications. It features low DC resistance and high saturation current capability, making it suitable for compact, high-frequency power designs. Key Features Inductance: 15 µH High current rating: up to 5.45 A (RMS) Saturation current: ~4 A Low DC resistance: 25.8 mΩ max Shielded construction for low EMI / magnetic leakage High self-resonant frequency: ~19 MHz Wide operating temperature: -40°C to +150°C Compact SMD package (~10.2 mm × 10.2 mm footprint) Typical Applications DC-DC converters (buck / boost) Power supply filtering Automotive and industrial power systems Point-of-load (POL) regulators High-frequency switching circuits #WurthElektronik #WEPDF #PowerInductor #15uH #SMDInductor #ShieldedInductor #PowerElectronics #ElectronicsComponents #SMTComponents #CommonPartsLibrary #Fixed-Inductor

1.5µH Shielded Drum Core, Wirewound Inductor 1.9 A 137mOhm Max 0806 (2016 Metric) The Bourns SRP2010-1R5M is a 1.5 µH wirewound drum-core power inductor designed for high-current, low-loss power conversion applications such as buck/boost converters in compact electronics like smartphones, tablets, SSDs, and embedded systems. It uses a metal powder (iron powder) core with magnetic shielding, which helps reduce EMI (electromagnetic interference) and improves efficiency in high-frequency switching circuits. Key Features Inductance: 1.5 µH Tolerance: ±20% Current Rating (Irms): ~1.9 A Saturation Current (Isat): ~2.5 A Low DCR: ~137 mΩ max Shielded construction (reduces magnetic radiation) Wirewound drum core design Surface-mount package (0806 / 2016 metric) Operating temperature: -40°C to +125°C RoHS compliant Typical Applications DC-DC converters (buck / boost regulators) Power management circuits in mobile devices Laptops, tablets, smartphones SSD/HDD power filtering Embedded systems and IoT devices #CommonPartsLibrary #Inductor #Coil #Choke #Fixed-Inductor #SRP2010

60V Independent Type 700mV@5A 5A SMA(DO-214AC) Schottky Diodes ROHS The MDD SS56 is a Schottky barrier rectifier diode in a compact SMA (DO-214AC) surface-mount package, designed for high-efficiency power rectification in low-voltage, high-current applications such as DC-DC converters, power supplies, and polarity protection circuits. It uses a Schottky metal-semiconductor junction, which enables low forward voltage drop and fast switching performance, making it more efficient than standard PN junction diodes in switching power designs. Key Features Schottky technology for low forward voltage drop (~0.7 V at 5 A typical) Maximum repetitive reverse voltage: 60 V Average forward current: 5 A High surge current capability: up to 125 A (8.3 ms half-sine) Low power loss / high efficiency operation Fast switching (no significant reverse recovery delay) Low reverse leakage current (~1 mA at 60 V typical) High junction temperature rating: up to ~150°C Surface-mount SMA (DO-214AC) package for compact PCB design Typical Applications DC-DC converters (buck / boost converters) Power rectification in SMPS (switch-mode power supplies) Reverse polarity protection Freewheeling / flyback diode in inductive loads Battery-powered and portable electronics High-efficiency power management circuits #CommonPartsLibrary #Diode

1A step-down regulator module, fixed 5V output voltage, 5-36V input voltage, -40°C to +85°C temperature range, TO-220 compatible LM78xx replacement dc-dc traco buck Converter*DCDC*TRACO*TSR?1*

DIODE SCHOTTKY 40V SMA(DO-214AC) The SS54 is a surface-mount Schottky barrier rectifier diode commonly used in power management and protection circuits. It is designed for high-speed switching applications and offers low forward voltage drop for improved efficiency in low-voltage systems. The device is widely used in DC-DC converters, reverse polarity protection, freewheeling circuits, and switching power supplies. Key Features Schottky barrier rectifier technology Maximum reverse voltage: 40 V Average forward current: 5 A Low forward voltage drop (typically around 0.55 V) High surge current capability Fast switching speed Surface-mount package (commonly DO-214AB / SMC) Low power loss and high efficiency Suitable for high-frequency applications Guard ring protection for improved reliability RoHS compliant versions available from many manufacturers Typical Applications Switching power supplies DC-DC buck or boost converters Reverse polarity protection Freewheeling / flyback diode applications Battery-powered devices LED drivers Power OR-ing circuits #CommonPartsLibrary #Diode

9.1A 4.7uH ±20% 15.15A 19.9mΩ SMD,11.5x10mm Fixed Inductors The AAPS1040M4R7A belongs to the AAPS series of molded power inductors, designed for high-current DC-DC converters and power management applications. It features a magnetically shielded construction, helping reduce electromagnetic interference (EMI) while maintaining stable inductance. Key Characteristics Component Type: Fixed power inductor Inductance: 4.7 µH Tolerance: typically ±20% Construction: Molded / shielded (low EMI noise) Mounting Type: Surface-mount (SMD) Package Size: approx. 10 × 10 mm footprint (1040 size) DC Resistance (DCR): ~19.9 mΩ (max) Rated Current (Irms): ~9.1 A Saturation Current (Isat): ~15.15A Function This inductor is used to: Store energy in magnetic form Smooth current in switching regulators Filter noise in power circuits Stabilize voltage in DC-DC converters Commonly found in: Buck / boost converters Power supplies Battery-powered systems Embedded electronics #commonpartslibrary #inductor #coil

Buck Adjustable 1.8V~3.3V 1.95V~5.5V 1A WLCSP-6-B(0.7x1.1) DC-DC Converters ROHS #CommonPartsLibrary #IntegratedCircuit #PowerManagement

This is a module of high efficiency synchronous step-down dc-dc converters optimized for battery powered portable applications. #power #dcdc #ti #buck #reusable #module #powermanagement #texas-instruments #sublayout

This is a reference design of high efficiency synchronous step-down dc-dc converters optimized for battery powered portable applications. #power #dcdc #ti #buck #referenceDesign #powermanagement #texas-instruments #template #reference-design

3A step-down switching regulator, Adjustable Output Voltage, 5.5-48V Input Voltage, 850kHz, PowerSO-8 DC/DC Buck Conwerter 3A TI*SO*PowerPAD*

3A monolithic step-down current source with synchronous rectification, 3-18V Input Voltage, 850kHz, DFN-8 DC/DC Buck Conwerter 3A Low Voltage Input LED Lighting DFN*1EP*4x4mm*P0.8mm*

3A monolithic step-down current source with synchronous rectification, 3-18V Input Voltage, 850kHz, SO-8 DC/DC Buck Conwerter 3A Low Voltage Input LED Lighting SOIC*3.9x4.9mm*P1.27mm*

3A monolithic synchronous step-down regulator, Adjustable Output Voltage, 2.5-18V Input Voltage, 900kHz, PowerSO-8 DC/DC Buck Conwerter 3A Low Voltage Input TI*SO*PowerPAD*

3A monolithic synchronous step-down regulator, Adjustable Output Voltage, 2.5-18V Input Voltage, 900kHz, DFN-8 DC/DC Buck Conwerter 3A Low Voltage Input DFN*EP*4x4mm*P0.8mm*

3A Step-Down Converter with DCS-Control, adjustable output, 2.4-5.5V input voltage, QFN-8 step-down dc-dc buck regulator Texas*VSON*HR*1.5x2mm*P0.5mm*

1A Step-Down Converter with DCS-Control, adjustable output, 3-17V input voltage, VSSOP-8 step-down dc-dc buck regulator MSOP*3x3mm*P0.65mm*

500mA Step-Down Converter with DCS-Control, adjustable output, 3-17V input voltage, WSON-8 step-down dc-dc buck regulator WSON*EP*2x2mm*P0.5mm*

150mA Synchronous Buck Converter With Ultra-Low IQ, 3V-65V input, adjustable output voltage, DFN-10 step-down dc-dc buck regulator adjustable Texas*PVSON*N10*

3.8V-32V Vin, 2A, Synonous Buck Converter with Low Quiescent Current & EMI Reduction TSOT-23-6L #CommonPartsLibrary #converter #DCDC #Stepdown #Mosfet