ArduTouch is really just an Arduino Uno clone with a small amplifier & speaker, with a PCB touch keyboard, a couple of extra buttons, and a couple of pots (for playing music and controlling the sounds). The ArduTouch Arduino Library is where the real magic comes from!

Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply (including LED), a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. #template

We will all have the same schematic diagram, let's be creative on what we can build on the pcb. List down all bugs you can find.

CheckIt is a daily habit tool. When you complete a habit, flip a switch, then an LED lights up. Future work will include wiring the 24pin FPC port to the Pico which causes an e-paper screen to display a message when a switch is flipped. This PCB runs using a Raspberry Pi Pico and has plans to be battery powered similar to a digital alarm clock.

NodeMCU V3 ESP8266 ESP-12E is WiFi development board that helps you to prototype your IoT product with few Lua script lines, or through Arduino IDE. The board is based on ESP8266 ESP-12E variant, unlike other ESP-12E, you won’t need to buy a separate breakout board, usb to serial adapter, or even solder it to a PCB to get started, you will only need a usb cable (Micro USB).

A simulated blinking LED circuit using an astable multivibrator a.k.a "flip-flop" as a square wave generator. It also includes PCB layout of the project.

NodeMCU V3 ESP8266 ESP-12E is WiFi development board that helps you to prototype your IoT product with few Lua script lines, or through Arduino IDE. The board is based on ESP8266 ESP-12E variant, unlike other ESP-12E, you won’t need to buy a separate breakout board, usb to serial adapter, or even solder it to a PCB to get started, you will only need a usb cable (Micro USB).

Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

The circuit that will bring humans to Mars! Just kidding.. this is a pcb test board. Hi

Production-readiness engineering review of the ESP32-C5 Node Cluster V2 EasyEDA design, including schematic, PCB, Gerbers, BOM, pick-and-place, power, RF, and battery safety.

Mach 1 overdrive clipping-section mod with the 12-position rotary clipping selector integrated onto the main PCB, D4/D5 omitted, PCB-mounted Volume/Drive/Tone controls, and a 125B-oriented control layout without Zero IOD branding.

Integrated PoE lighting-control PCB with 802.3bt PoE input, isolated 24V/3.3V power, Ethernet control, MOSFET dimming, DALI interface, and sensor inputs.

BF-SR-PCBv1 signal relocation PCB for ESP32-S3-DEVKITC-1-N32R16V

Professional-grade ultra-low-power 52 mm circular BLE smartwatch PCB with biomedical sensing, AMOLED display, USB-C charging, and 6-layer RF/mixed-signal layout constraints.

Standalone STM32F446RE-header CAN/RS485 stepper motor controller PCB with external 5V input, 3.3V logic rail, CAN protection, SWD/reset, level-shifted STEP/DIR/ENABLE outputs, and split-ready modular layout.

Industrial Welding IoT Controller — schematic and placement preserved; PCB routing cleanup still required before manufacturing.

Production-intent ESP32-S3 handheld controller with USB-C sink power, ST7789 SPI TFT, 5-way controls, class-D speaker output, and factory test pads on a 4-layer PCB.

Mini UPS PCB for a 42 V external adapter and external 10S lithium battery pack. Includes adapter-priority source selection with automatic switchover, input protection, ideal-diode OR-ing, a 30 V to 42 V HV bus, and a regulated 12 V output stage. Includes status LEDs and battery monitor pads. Excludes onboard charger circuitry and excludes adapter or battery source design.

High-level recreation of the ThirstIQ Cap wiring diagram using an ESP32-WROOM-32 with AMS1117-3.3 regulated battery input, inline ON/OFF switch, four touch input headers on IO32/IO33/IO25/IO26, shared I2C OLED and RTC on IO21/IO22, UART debug/programming header on TXD0/RXD0, BOOT and RESET pushbuttons on IO0 and EN, buzzer on IO4, common 3V3/GND distribution, and PCB preparation for a 160 mm x 100 mm 4-layer layout. Layout intent includes clean 3.3 V power distribution, local decoupling for regulator and ESP32, accessible external headers/buttons, short clean BOOT/EN traces, shared I2C routing, touch-signal separation from noisy power and buzzer traces, and ESP32 antenna keepout.

Swiftlane SRB Lite relay controller layout under production cleanup. Updated board-level rules to conservative manufacturable defaults (0.15 mm min trace and keep out, 0.25 mm board inset, explicit preferred widths) and audited remaining PCB blockers. Current blockers remain concentrated in overlapping copper, floating copper, and unrouted priority nets pending further interactive layout cleanup and re-route passes.

Production-Ready ESP32 Bulk Dialer PCB with Triple SIM800L, MFRC522 RFID, SPI Storage, and Robust Power Management

Production-Ready Automotive Crash Detection Controller PCB (90x60mm) – 2-Layer with Arduino Nano, SIM7600E-H, IMU & RF

Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

Template for Arduino Nano Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Nano itself along with the board outline on the silkscreen. #Arduino #Nano #Shield #template #project #project-template

Template for Arduino Nano Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Nano itself along with the board outline on the silkscreen. #Arduino #Nano #Shield #template #project #project-template