DC Board DRC Fixes
Find and remove any dangling trace stubs left after the cleanup.
Thought for 24 sec
I’ll run the dangling-trace check, delete the reported stub trace nodes in one batch, then rerun the dangling-trace check to confirm they’re gone.
Worked for 2 mins 24 sec
Dangling trace cleanup is complete.
- Found 31 dangling-trace warnings.
- Deleted 60 trace stub nodes tied to those warnings.
- Re-ran dangling-trace DRC at 2026-05-15 22:12:22 UTC.
- Remaining dangling traces: 0
No schematic edits or connector moves were made.
Check the layout for unrouted nets after removing those stubs.
Thought for 13 sec
I’ll check the layout for unrouted nets by running the airwire DRC now, then I’ll report the current unrouted count and affected items without making routing changes.
Worked for 32 sec
Layout check found 33 unrouted airwire errors after the overlap and dangling-stub cleanup.
Current cleanup status:
- Overlapping copper: cleared to 0
- Dangling traces: cleared to 0
- Unrouted nets / airwires: 33 errors remain
Next step is routing those remaining airwires, preferably in phases: power/ground first, then signals.
Route power/ground
List unrouted nets
Recheck after routing
Route short signals
Industrial Welding IoT Controller
