Crank up your robotics with powerful Adafruit DRV8871 motor driver breakout board. This motor driver has a lot of great specs that make it useful for a wide variety of mechatronics. In particular, the simple resistor-set current limiting and auto-magic PWM support make it super easy to use with just about any brushed DC motor.

Driver for 3-Phase BLDC/PMSM Motors up to 2A peak,

This is a climate control system reference design with a STM32WB5 microcontroller, power manager IC, USB Type-C, JST connectors, and an LCD driver. #referenceDesign #edge-computing #edgeComputing #stm #template #iot #control #BLE #reference-design

This is a smart blind control system reference design designed to automate the operation of window blinds. It utilizes an ESP32 microcontroller for managing control signals and an A4988 stepper motor driver to control blinds' movement. It also includes USB interfacing and LED feedback. #referenceDesign #edge-computing #edgeComputing #espressif #template #blind #DC #motor #servo #esp32 #reference-design

This is a smart blind control system reference design designed to automate the operation of window blinds. It utilizes an ESP32 microcontroller for managing control signals and an A4988 stepper motor driver to control blinds' movement. It also includes USB interfacing and LED feedback. #referenceDesign #edge-computing #edgeComputing #espressif #template #blind #DC #motor #servo #esp32 #reference-design

The SparkFun RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The RedBot is a motor driver and Arduino combination with various headers and connections, eliminating the need to stack multiple shields.

This is a climate control system reference design with a STM32WB5 microcontroller, power manager IC, USB Type-C, JST connectors, and an LCD driver. #referenceDesign #edge-computing #edgeComputing #stm #template #iot #control #BLE #reference-design

LCD Driver IC 32 SEGMENT 44-PLCC

Arduino Nano(PR2040) motor shield, with two channels and A4988 driver. #template #project #shield #arduino #motor #A4988

The VLV041235L-L20 rectangular, Z-axis LRA can be used for a variety of haptic feedback applications. This LRA is different than most rectangular LRA's which oscillate in the X plane, along the length of the device. Like all LRA's this device is typically connected to a LRA driver IC which produces the AC drive signal for this device.

Dual Motor Driver Circuit using L298N motor driver module with Atmega8a..

The SparkFun RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The RedBot is a motor driver and Ardiuno combination with various headers and connections, eliminating the need to stack multiple shields.

This is a climate control system reference design with a STM32WB5 microcontroller, power manager IC, USB Type-C, JST connectors, and an LCD driver. #referenceDesign #edge-computing #edgeComputing #stm #template #iot #control #BLE #reference-design

This is a smart blind control system reference design designed to automate the operation of window blinds. It utilizes an ESP32 microcontroller for managing control signals and an A4988 stepper motor driver to control blinds' movement. It also includes USB interfacing and LED feedback. #referenceDesign #edge-computing #edgeComputing #espressif #template #blind #DC #motor #servo #esp32 #reference-design

This is a smart blind control system reference design designed to automate the operation of window blinds. It utilizes an ESP32 microcontroller for managing control signals and an A4988 stepper motor driver to control blinds' movement. It also includes USB interfacing and LED feedback. #referenceDesign #edge-computing #edgeComputing #espressif #template #blind #DC #motor #servo #esp32 #reference-design

Dual Motor Driver Circuit using L298N motor driver module with Atmega8a..

This is a smart blind control system reference design designed to automate the operation of window blinds. It utilizes an ESP32 microcontroller for managing control signals and an A4988 stepper motor driver to control blinds' movement. It also includes USB interfacing and LED feedback. #referenceDesign #edge-computing #edgeComputing #espressif #template #blind #DC #motor #servo #esp32 #reference-design

The SparkFun RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The RedBot is a motor driver and Arduino combination with various headers and connections, eliminating the need to stack multiple shields.

Highly integrated single chip USB audio solution. All essential analog modules are embedded in CM108, including dual DAC and earphone driver, ADC, microphone booster, PLL, regulator, and USB transceiver.

Highly integrated single chip USB audio solution. All essential analog modules are embedded in CM108, including dual DAC and earphone driver, ADC, microphone booster, PLL, regulator, and USB transceiver.

Dual Motor Driver Circuit using L298N motor driver module with Atmega8a..

Unipolar Motor Driver NMOS PWM 8-SO PowerPad #CommonPartsLibrary #MotorDriver #IntegratedCircuit #DRV8870

Dual Motor Driver Circuit using L298N motor driver module with Atmega8a..

VR Glove Driver Top Schematic

The SparkFun RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The RedBot is a motor driver and Arduino combination with various headers and connections, eliminating the need to stack multiple shields.

use code and design skemetics > #include <Stepper.h> #define STEPS_PER_REVOLUTION 200 // Steps per revolution of your stepper motor #define MICROSTEPS_PER_STEP 8 // Microsteps per step of the stepper driver (DMA860H supports up to 256 microsteps) #define STEPPER_PIN1 12 // Stepper motor driver pulse pin #define STEPPER_PIN2 13 // Stepper motor driver direction pin #define STATUS_BUTTON_PIN 2 // Pin connected to status button #define EMERGENCY_BUTTON_PIN 3 // Pin connected to emergency stop button #define HOME_BUTTON_PIN 4 // Pin connected to home button // Define states for button handling enum ButtonState { Idle, Pressed, Debouncing }; ButtonState statusButtonState = Idle; ButtonState emergencyButtonState = Idle; ButtonState homeButtonState = Idle; // Create a Stepper object with 200 steps per revolution and connect to appropriate pins Stepper stepper(STEPS_PER_REVOLUTION * MICROSTEPS_PER_STEP, STEPPER_PIN1, STEPPER_PIN2); void setup() { Serial.begin(9600); stepper.setSpeed(100); // Set the speed of the stepper motor (steps per second) // Initialize button pins pinMode(STATUS_BUTTON_PIN, INPUT_PULLUP); pinMode(EMERGENCY_BUTTON_PIN, INPUT_PULLUP); pinMode(HOME_BUTTON_PIN, INPUT_PULLUP); // Attach interrupts to buttons attachInterrupt(digitalPinToInterrupt(STATUS_BUTTON_PIN), statusButtonISR, FALLING); attachInterrupt(digitalPinToInterrupt(EMERGENCY_BUTTON_PIN), emergencyButtonISR, FALLING); attachInterrupt(digitalPinToInterrupt(HOME_BUTTON_PIN), homeButtonISR, FALLING); } void loop() { // Handle button states handleButtonState(statusButtonState, statusButtonPressed); handleButtonState(emergencyButtonState, emergencyButtonPressed); handleButtonState(homeButtonState, homeButtonPressed); // Your main code here } // ISR for status button void statusButtonISR() { statusButtonPressed = true; } // ISR for emergency stop button void emergencyButtonISR() { emergencyButtonPressed = true; } // ISR for home button void homeButtonISR() { homeButtonPressed = true; } // Function to handle button state transitions void handleButtonState(ButtonState &state, bool &pressed) { switch (state) { case Idle: if (pressed) { state = Debouncing; delay(50); // Debouncing delay } break; case Debouncing: if (!pressed) { state = Idle; } else { state = Pressed; } break; case Pressed: // Perform actions here when the button is pressed if (state == statusButtonState) { Serial.println("Status button pressed."); // Perform status-related actions here } else if (state == emergencyButtonState) { Serial.println("Emergency stop button pressed."); // Perform emergency stop actions here } else if (state == homeButtonState) { Serial.println("Home button pressed."); // Perform homing actions here } state = Idle; break; } pressed = false; }

Highly integrated single chip USB audio solution. All essential analog modules are embedded in CM108, including dual DAC and earphone driver, ADC, microphone booster, PLL, regulator, and USB transceiver.

Arduino Uno R3 shield + very basic H bridge driver and connector

This is a IR2110 high side mosfet driver circuit with mosfet included. This is a circuit I use often and I believe it is time to give it its own board and project.

This tiny board is an easy way to use Toshiba’s TB6612FNG dual motor driver, which can independently control two bidirectional DC motors or one bipolar stepper motor. A recommended motor voltage of 4.5 V to 13.5 V and peak current output of 3 A per channel (1 A continuous) make this a great motor driver for low-power motors. #Module #Motor-Driver #TB6612FNG

CalderaCORE carrier board with external TPA3255 EVM interfaces, including isolated board-edge speaker output screw terminals for SUB_L, SUB_R, MID, and TWT driver wiring.

Wearable closed-loop ultrasonic monitoring and transcutaneous neuromodulation system based on ESP32-C3, powered from a 7.4 V 1000 mAh LiPo battery with TP4056 charging, MT3608 boost conversion, AMS1117-3.3 regulation, JSN-SR04T ultrasonic sensing, LED and buzzer alerts through a BC547 driver, and a reserved neuromodulation interface for future integration.

SCADA Sensor Node v2.1 using a Heltec WiFi LoRa 32 V4 module with separate +5V and board-generated +3V3 rails, ADS131M08 8-channel ADC front end, TCA9548A I2C multiplexer, TMP102-based fan control, ULN2003A relay and fan driver, CT/pressure/analog/One-Wire/vibration/humidity/Qwiic/flow/digital sensor interfaces, relay outputs, fan connector, brownout sensing, and a 200 mm x 140 mm 2-layer layout with Heltec keepout, antenna clearance, mounting holes, and DIN-rail slots.

Driver drowsiness detection ECG front end based on the AD8232 with ECG electrode interface, analog signal conditioning, a dedicated 50 Hz twin-T notch filter for power-line interference rejection, regulated low-noise analog power, and a downstream conditioned ECG output prepared for processing and fatigue/drowsiness analysis.

300 W universal-input isolated offline SMPS based on a modified ATX-style architecture. Universal 115-230 VAC, 50/60 Hz input via fused IEC C14 inlet. Outputs: +12 V at 20 A, +5 V at 14 A, +3.3 V at 12 A, +5 Vsb at 2.5 A, and -12 V at 0.3 A. Includes primary rectification with GBU806 bridge, bulk capacitors, bleeders, snubbers, main PWM and driver transformer, standby flyback, optocoupler and TL431 feedback, supervisor logic, test points, fan and heatsink provisions, and 2-layer FR-4 PCB layout with 8 mm primary-secondary isolation and heavy copper routing on high-current rails.

5V barrel-powered stepper motor controller board using a TMC2300 driver, a 4-wire JST-PH motor connector, and mechanical motor mounting with two 2 mm holes spaced 20 mm apart plus a centered 8 mm shaft hole.

Single-project implementation of the Blue Ant AMP Architecture Rev2 using one shared schematic with six logical board partitions: PCB-01 phono stage, PCB-02 input selector and relay attenuator interface, PCB-03 balanced driver and RCA-to-balanced conversion interface, PCB-04 dual logical power amplifier channels, PCB-05 multi-rail power supply, and PCB-06 isolated control and display. Explicit inter-partition connector interfaces and named nets preserve balanced signal handling after RCA conversion, distinct rail domains (+63V, -63V, +15V, -15V, +5V, +3.3V), and documented hard constraints including low-noise analog isolation and high-voltage domain separation.

Airsoft HPA FCU - 2S VBAT_SOL direct, nRF52 BLE, MOSFET solenoid driver

6S Li-ion USB-C charged 40V/0.75A PWM-dim LED driver with 433MHz remote

connects driver to motors and provides 3.3V from buck regulator

36 V Contactor Coil Driver with Safe Kill Loop, 3.3 V Logic, SPI IMU, 24 V/5 A Buck, and ESP32 IO12-Driven E-Stop MOSFET via Series PH2.0 Safety Connectors #E_STOP #MOSFET #PH2.0 #SAFETY

Power Tree and Actuator Driver with Robust Filtering, Current Sensing, PGOOD Sequencing, and Star-Tie Grounding

Industrial USB-C PD (12 V) LoRaWAN LED Driver Node

4×4 cm USB-C PD & Qi Wireless Power Bank with Li-Po Charging, Power-Path Management, 3.3 V LDO, Full-Bridge Gate Driver, LED Resistors, and Corrected 5 V Output Feedback (Schematic Cleaned: Redundant Net Portals/Passives Removed, Fuel-Gauge LED Channels Verified, ERC/DRC Issues Resolved)

Compact MPPT Solar-Powered Dusk-to-Dawn 0.5 W LED Light with NCP3065 SEPIC Buck-Boost Driver, BQ24650 MPPT Charger, MIC845 Comparator, Vertical JST-PH 2-Pin Battery Connector, Off-Board Solar Input Pads/Optional Connector, Centered Backside LED, 1.4 mm Perimeter Clearance #SEPIC #NCP3065

ESP32S3 XIAO ePaper HAT+ Driver Board with Integrated Power Rails and SPI Interface

Production-Ready 2-Layer ESP32-S3 Controller PCB: Dual WROOM-1U/WROOM-1 Footprints, ESD-Protected USB-C Debug, Protected 12 V Input (Fuse, Reverse Diode, TVS), TPS5430DDA Buck + TLV70033DDCT LDO Power, Integrated TMC2209 Stepper Driver, 3× 12 V/2 A LED Channels with Screw Terminals, Comprehensive Test Points, Full BOM/Pin Map/Gerbers, Logic Power Supply Audited and Validated #ESP32S3 #PowerManagement #MotorControl #LEDControl #ProductionReady #PowerAudit

12V Stepper Motor Driver Board with A4988, ATmega328P, USB-C CH340 Interface, and Onboard 12V→5V Buck Regulation

Ultra-Stable 850 nm, 1 mW VCSEL Module with Low-Noise Constant-Current Driver and Analog Modulation

Integration of 2.9" Raw E-Paper Display with Raspberry Pi using FPC and Dedicated PMIC Driver