• Raspberry Pi 2,3 and 4 Model B

    Raspberry Pi 2,3 and 4 Model B

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    gyatt

    gyatt

    3 Comments

  • Plant Care System Reference Design d3b4 beTG ef00 b1c0 udnL

    Plant Care System Reference Design d3b4 beTG ef00 b1c0 udnL

    This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

    sandymasch

    sandymasch

    3 Comments

  • Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

    renzoclemente

    renzoclemente

    3 Comments

  • raspberry-pi-2-3-4-model-b-template

    raspberry-pi-2-3-4-model-b-template

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    kbro

    kbro

    3 Comments

  • Raspberry Pi 2,3 and 4 Model B nUvM

    Raspberry Pi 2,3 and 4 Model B nUvM

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    ronald0

    ronald0

    3 Comments

  • BQ24070 Reference Design

    BQ24070 Reference Design

    This is a reference design of a BQ24070-based li ion charging IC created according to the manufacturer's recommendations. The board has a connector with pins for setting modes and 3 power connectors #BQ24070 #IC #lion #referenceDesign #bms #texas-instruments #template #reference-design

    vasyl

    vasyl

    3 Comments

  • MPPT Solar Charge Controller

    MPPT Solar Charge Controller

    10A MPPT Solar Charge Controller with dual USB ports using Low-power 32bit ARMCortex-M0+ MCU (STM32L072). Expandable via Olimex Universal Extension Connector (UEXT) featuring I2C

    jharwinbarrozo

    jharwinbarrozo

    3 Comments

  • raspberry-pi-2-3-4-model-b-template w2wB

    raspberry-pi-2-3-4-model-b-template w2wB

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    abinkj

    abinkj

    2 Comments

  • Raspberry Pi 2,3 and 4 Model B adbf

    Raspberry Pi 2,3 and 4 Model B adbf

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    3176ajith

    3176ajith

    2 Comments

  • On Air R2 Demo g6fL

    On Air R2 Demo g6fL

    R2 changes: -Moving to Letter Modules for ease of design -Adding ESP32 for WiFi On/Off and intensity control -Optional: Add unpopulated AA Battery Holder for battery option R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C. #template

    quane1

    quane1

    2 Comments

  • raspberry-pi-2-3-4-model-b-template

    raspberry-pi-2-3-4-model-b-template

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    farq

    &

    2 Comments

  • E-ink Smart Thermostat Reference Design

    E-ink Smart Thermostat Reference Design

    This project is a Smart Thermostat design using an ESP32 module for WiFi connectivity and a BME680 sensor for environmental monitoring. The user interface includes an E-ink display and an encoder for settings adjustment. Power is managed through a USB-C connector with a 3.3V regulator. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #thermostat #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design

    omarsaldanna

    1 Comment

  • On Air R2 Demo

    On Air R2 Demo

    R2 changes: -Moving to Letter Modules for ease of design -Adding ESP32 for WiFi On/Off and intensity control -Optional: Add unpopulated AA Battery Holder for battery option R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C. #template

    ryanc

    1 Comment

  • Raspberry Pi 2 3 4 5 Model B nJQL

    Raspberry Pi 2 3 4 5 Model B nJQL

    Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

    alvaro2006

    1 Comment

  • Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

    alvaro2006

    1 Comment

  • Raspberry Pi 2 3 4 5 Model B 8Dk5

    Raspberry Pi 2 3 4 5 Model B 8Dk5

    Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

    iasonarg

    1 Comment

  • BLE temperature sensor Reference Design 7VwF

    BLE temperature sensor Reference Design 7VwF

    This is a reference design of the Bluetooth Low-Energy (BLE) temperature sensor. It uses an ESP32-MINI-1 microcontroller to connect to an SHT31-DIS-B2.5KS sensor. The sensor can be powered through connector J15, and additional components provide voltage regulation and derbiaising. Temperature data can be accessed via BLE. #referenceDesign #simple-embedded #espressif #template #reference-design

    zixuanchen

    1 Comment

  • BLE temperature sensor Reference Design

    BLE temperature sensor Reference Design

    This is a reference design of the Bluetooth Low-Energy (BLE) temperature sensor. It uses an ESP32-MINI-1 microcontroller to connect to an SHT31-DIS-B2.5KS sensor. The sensor can be powered through connector J15, and additional components provide voltage regulation and derbiaising. Temperature data can be accessed via BLE. #referenceDesign #simple-embedded #espressif #template #reference-design

    zixuanchen

    1 Comment

  • On Air R2 - Thread Enabled

    On Air R2 - Thread Enabled

    R2 w Thread changes: -Moving to Letter Modules for ease of design -Adding MGM210L for Matter on Thread On/Off and intensity control -Shifted A and R letters closer to fix Kerning -Optional: Add unpopulated AA Battery Holder for battery option R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C. #template #arduino-matter

    ppmax500

    1 Comment

  • Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

    manicwusky

    1 Comment

  • Raspberry Pi 2,3 and 4 Model B

    Raspberry Pi 2,3 and 4 Model B

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    raghavroy

    1 Comment

  • Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

    carlos241

    1 Comment

  • Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

    consultores

    1 Comment

  • LT3652 Reference Design

    LT3652 Reference Design

    This project is a reference design for a 2A Solar Panel Power Manager With 7.2V LiFePO4 Battery and 17V Peak Power Tracking based on LT3652 IC. It includes components like resistors, capacitors, LEDs, and a JST connector for power input and battery connection. The design caters to high input voltage applications and ensures efficient charging with minimal components. #project #LT3652 #ReferenceDesign #charger #BatteryManagement #solar #LiFePO4 #referenceDesign #bms #analog #template #reference-design

    hasanacikeloffical

    1 Comment

  • MPPT Solar Charge Controller

    MPPT Solar Charge Controller

    10A MPPT Solar Charge Controller with dual USB ports using Low-power 32bit ARMCortex-M0+ MCU (STM32L072). Expandable via Olimex Universal Extension Connector (UEXT) featuring I2C

    brytsparklabs

    1 Comment

  • DB125-3.81-4P-GN-S

    DB125-3.81-4P-GN-S

    Straight 4 pin Pitch 3.81mm Screw terminal block #screwblock #connector #commonPartsLibrary

    mrcyme

    1 Comment

  • Plant Care System Reference Design aiaZ 1aU8

    Plant Care System Reference Design aiaZ 1aU8

    This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

    akshaysarode

    1 Comment

  • MGM240P Template hM66

    MGM240P Template hM66

    This is the MGM240P template with minimal configuration for operation. There is a 3.3V regulator, a connector for UART and SWD #MGM240P #IoT #template #uart #3V3 #arduino-matter

    jmlapido

    1 Comment

  • STM32 Ethernet board

    STM32 Ethernet board

    It is a board based on STM32L4 with a built-in ethernet IC W5500 that allows you to create IoT projects based on the modern ARM Cortex®-M4 core. A connector with SWD interface and USB C for communication are provided for the firmware #IoT #ARM #STM #Ethernet #W5500 #IC #project

    abm666

    1 Comment

  • Raspberry Pi 2 3 4 5 Model B aLFT

    Raspberry Pi 2 3 4 5 Model B aLFT

    Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

    vangus

    1 Comment

  • LT3652 Reference Design 99Fe

    LT3652 Reference Design 99Fe

    This project is a reference design for a 2A Solar Panel Power Manager With 7.2V LiFePO4 Battery and 17V Peak Power Tracking based on LT3652 IC. It includes components like resistors, capacitors, LEDs, and a JST connector for power input and battery connection. The design caters to high input voltage applications and ensures efficient charging with minimal components. #project #LT3652 #ReferenceDesign #charger #BatteryManagement #solar #LiFePO4 #referenceDesign #bms #analog #template #reference-design

    nucode

    1 Comment

  • 0533984002 e5c0

    0533984002 e5c0

    Connector Header Surface Mount 2 position 0.049" (1.25mm)

    lunarresources

    &

    1 Comment

  • 0533984002_Sample 4b8f

    0533984002_Sample 4b8f

    Connector Header Surface Mount 2 position 0.049" (1.25mm)

    lunarresources

    &

    1 Comment

  • Raspberry Pi 2 3 4 5 Model B g78p

    Raspberry Pi 2 3 4 5 Model B g78p

    Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

    sdbi

    1 Comment

  • Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

    sdbi

    1 Comment

  • Shield Tribometro CICATA

    Shield Tribometro CICATA

    Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

    carloscas

    1 Comment

  • raspberry-pi-2-3-4-model-b-template

    raspberry-pi-2-3-4-model-b-template

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    naterton

    1 Comment

  • TCS3200D-TR Reference Design wE2X

    TCS3200D-TR Reference Design wE2X

    This project is a TCS3200D-TR color sensor circuit utilizing resistors, capacitors, LEDs, a JST connector, and a transistor for control. The color sensor allows for precise color identification and its output is accessible through a JST connector. #industrialSensing #colorSensor #referenceDesign #osramusa #template #reference-design

    jfcorangel

    1 Comment

  • MPPT Solar Charge Controller

    MPPT Solar Charge Controller

    10A MPPT Solar Charge Controller with dual USB ports using Low-power 32bit ARMCortex-M0+ MCU (STM32L072). Expandable via Olimex Universal Extension Connector (UEXT) featuring I2C

    robert

    1 Comment

  • Haptic Glove Controller Board Rev2 764b

    Haptic Glove Controller Board Rev2 764b

    Haptic Glove Controller Board NUCLEO-F411RE based Fixed Servo Connections to match standard servo wiring Revised footprint of 2n3904s transistors since base and emitter footprint were swapped Larger power traces Swapped SDO and SDI of SPI Lines to the FPC connector so it matches with peripheral.

    klam23

    1 Comment

  • OtterScreenAdapter

    OtterScreenAdapter

    It turns out that modern screens/panels like the LP097QX1-SPA1 from LG have a eDP interface, which is only DP (DisplayPort) but without a standard connector. You can buy such a screen for ~40€ and with the OtterScreenAdapter (part cost: ~10€) you can convert it into an external 2048x1536px monitor.

    vasyl

    vasyl

    &

    jharwinbarrozo

    1 Comment

  • MPPT Solar Charge Controller

    MPPT Solar Charge Controller

    10A MPPT Solar Charge Controller with dual USB ports using Low-power 32bit ARMCortex-M0+ MCU (STM32L072). Expandable via Olimex Universal Extension Connector (UEXT) featuring I2C

    ihscielle

    1 Comment

  • Raspberry Pi 2,3 and 4 Model B 7kyc

    Raspberry Pi 2,3 and 4 Model B 7kyc

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    3176ajith

    3176ajith

    1 Comment

  • Plant Care System Reference Design d3b4 beTG ef00 aSMV

    Plant Care System Reference Design d3b4 beTG ef00 aSMV

    This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

    alvina

    1 Comment

  • Pin Socket 01x20 2.54mm Vertical

    Pin Socket 01x20 2.54mm Vertical

    Through Hole straight socket strip, 01x20, 2.54mm pitch, single row #connector #pinsocket #tht

    sbuono333

    1 Comment

  • RPi TDC

    RPi TDC

    Time-to-Digital converter plug-on module (shield) for Raspberry Pi B+. The board utilizes a TDC7200 (TI) with a time resolution of ~50ps. The Start/Stop inputs to the TDC can be configured with JP2 from either external signals or coming from the RPi's GPIO5 pin in case a timing signal is present at this pin from another plug-on board on the same RPi. Start and Stop signals can be configured from different signals (coming from the input connectors) or the same source (setting "common" on JP3) either supplied from the Start input connector or GPIO5. Read-out of the TDC chip is done through the RPi's SPI bus.

    adrian95

    1 Comment

  • raspberry-pi-2-3-4-model-b-template 467a

    raspberry-pi-2-3-4-model-b-template 467a

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    vonpox

    1 Comment

  • PanelModule D-SUB25

    PanelModule D-SUB25

    Panel module for connecting D-SUB 25 via pin socket 02x13 #connector #D-SUB #25

    vasyl

    vasyl

    1 Comment

  • Haptic Glove Controller Board Rev2 9f7d

    Haptic Glove Controller Board Rev2 9f7d

    Haptic Glove Controller Board NUCLEO-F411RE based Fixed Servo Connections to match standard servo wiring Revised footprint of 2n3904s transistors since base and emitter footprint were swapped Larger power traces Swapped SDO and SDI of SPI Lines to the FPC connector so it matches with peripheral.

    klam23

    1 Comment

  • USB4105_REVA - CI test

    USB4105_REVA - CI test

    GCT_USB4105_REVA USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle; Through Hole In Stock None Global Connector Technology None https://pricing.snapeda.com/search/part/USB4105/?ref=eda USB4105 Aliases: undefined

    oozliuoo

    1 Comment