Solid State Relay, 34 Series, Ultra-Slim, SPST-NO, 2 A, 36 VDC, PCB, Through Hole, Zero Crossing #Relay #SolidState #commonpartslibrary

General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant

IC SURGE STOPPER 2.7V~23V VQFN-10-HR(2x2) The TPS25947xx family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short-circuits, voltage surges, reverse polarity and excessive inrush current. With integrated back-to-back FETs, reverse current flow from output to input is blocked at all times, making the devices an excellent choice for power MUX/ORing applications as well as systems which need load side energy hold up storage in case input power supply fails. The devices use linear ORing based scheme to establish an almost zero DC reverse current and emulate ideal diode behavior with minimum forward voltage drop and power dissipation. Output slew rate and inrush current can be adjusted using an external capacitor. Loads are protected from input overvoltage conditions either by clamping the output to a safe fixed maximum voltage (pin selectable), or by cutting off the output if input exceeds an adjustable overvoltage threshold. The devices respond to output overload by actively limiting the current or breaking the circuit. The output current limit threshold as well as the transient overcurrent blanking timer are user adjustable. The current limit control pin also functions as an analog load current monitor. The devices are available in a 2mm × 2mm, 10- pin HotRod™ QFN package for improved thermal performance and reduced system footprint. The devices are characterized for operation over a junction temperature range from –40°C to +125°C. • Wide operating input voltage range: 2.7V to 23V – 28V absolute maximum – Withstands negative voltages up to –15V • Integrated back-to-back FETs with low onresistance: RON = 28.3mΩ (typical) • Ideal diode operation with true reverse-current blocking • Fast overvoltage protection – Overvoltage clamp (OVC) with pin-selectable threshold (3.8V, 5.7V, 13.8V) and 5μs (typical) response time OR – Adjustable overvoltage lockout (OVLO) with 1.2μs (typical) response time • Overcurrent protection with load current monitor output (ILM) – Active current limit OR circuit-breaker options – Adjustable threshold (ILIM) 0.5A to 6A • ±10% accuracy for ILIM > 1A – Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × ILIM – Output load current monitor accuracy: ±6% (IOUT ≥ 1A) • Fast-trip response for short-circuit protection – 500ns (typical) response time – Adjustable (2 × ILIM) and fixed thresholds • Active high enable input with adjustable undervoltage lockout threshold (UVLO) • Adjustable output slew rate control (dVdt) • Overtemperature protection • Digital outputs – Priority power MUX control (AUXOFF) and fault indication (FLT) or – Power Good indication (PG) with adjustable threshold (PGTH) • UL 2367 recognition – File No. E339631 – RILM ≥ 750Ω • IEC 62368-1 CB certified • Small footprint: QFN 2mm × 2mm, 0.45mm pitch #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Isolated Module DC DC Converter 1 Output 12V 13.4A 9V - 50V Input DCM3623T50T13A6T70 is a high-density, isolated, and regulated DC-DC converter module from Vicor, designed to efficiently convert a wide input voltage range into a stable 12V output. Utilizing Vicor's advanced ChiP™ packaging technology and Zero Voltage Switching (ZVS) topology, it delivers high efficiency, excellent thermal performance, and robust protection features, making it suitable for industrial, transportation, aerospace, and distributed power applications. Key Features Wide input voltage range: 9V to 50V DC Regulated 12V DC output Maximum output power: 160W Continuous output current up to 13.4A High efficiency up to 91.5% 2250V DC isolation between input and output High-frequency Zero Voltage Switching (ZVS) topology Integrated protections: Over-Voltage Protection (OVP) Over-Current Protection (OCP) Under-Voltage Lockout (UVLO) Short-Circuit Protection (SCP) Over-Temperature Protection (OTP) Compact 3623 Through-Hole ChiP® package Operating temperature range: -40°C to +125°C Suitable for industrial, process control, transportation, defense, and aerospace systems. #DCDCConverter #Vicor #PowerModule #IsolatedConverter #PowerElectronics #IndustrialAutomation #EmbeddedSystems #TransportationElectronics #AerospaceElectronics #HighEfficiencyPower #ChiPTechnology #DCM3623

dsPIC dsPIC™ 33CK, Functional Safety (FuSa) Microcontroller IC 16-Bit 100MHz 256KB (256K x 8) FLASH 48-UQFN (6x6) 28/36/48/64/80-Pin Digital Signal Controllers with High-Resolution PWM and CAN Flexible Data (CAN FD) Operating Conditions • 3.0V to 3.6V, -40°C to +125°C, DC to 100 MIPS • 3.0V to 3.6V, -40°C to +150°C, DC to 70 MIPS Core: 16-Bit dsPIC33CK CPU • 32-256 Kbytes of Program Flash with ECC and 8-24K RAM • Fast 6-Cycle Divide • LiveUpdate • Code Efficient (C and Assembly) Architecture • 40-Bit Wide Accumulators • Single-Cycle (MAC/MPY) with Dual Data Fetch • Single-Cycle, Mixed-Sign MUL Plus Hardware Divide • 32-Bit Multiply Support • Four Sets of Interrupt Context Saving Registers which Include Accumulator and STATUS for Fast Interrupt Handling • Zero Overhead Looping • RAM Memory Built-In Self-Test (MBIST) Clock Management • Internal Oscillator • Programmable PLLs and Oscillator Clock Sources • Reference Clock Output • Fail-Safe Clock Monitor (FSCM) • Fast Wake-up and Start-up • Backup Internal Oscillator Power Management • Low-Power Management Modes (Sleep, Idle, Doze) • Integrated Power-on Reset and Brown-out Reset High-Speed PWM • Eight PWM Pairs • Up to 250 ps PWM Resolution • Dead Time for Rising and Falling Edges • Dead-Time Compensation • Clock Chopping for High-Frequency Operation • PWM Support for: - DC/DC, AC/DC, inverters, PFC, lighting - BLDC, PMSM, ACIM, SRM motors • Fault and Current Limit Inputs • Flexible Trigger Configuration for ADC Triggering Timers/Output Compare/Input Capture • One General Purpose Timer • Peripheral Trigger Generator (PTG): - Up to 15 trigger sources to other peripheral modules - CPU independent state machine-based instruction sequencer • Nine MCCP/SCCP modules which Include Timer, Capture/Compare and PWM: - One MCCP - Eight SCCPs - 16 or 32-bit time base - 16 or 32-bit capture - 4-deep capture buffer • Fully Asynchronous Operation, Available in Sleep Modes #CommonPartsLibrary #IntegratedCircuit #Microcontroller #DSPIC33CK256MP

dsPIC dsPIC™ 33CK, Functional Safety (FuSa) Microcontroller IC 16-Bit 100MHz 128KB (128K x 8) FLASH 48-UQFN (6x6) 28/36/48/64/80-Pin Digital Signal Controllers with High-Resolution PWM and CAN Flexible Data (CAN FD) perating Conditions • 3.0V to 3.6V, -40°C to +125°C, DC to 100 MIPS • 3.0V to 3.6V, -40°C to +150°C, DC to 70 MIPS Core: 16-Bit dsPIC33CK CPU • 32-256 Kbytes of Program Flash with ECC and 8-24K RAM • Fast 6-Cycle Divide • LiveUpdate • Code Efficient (C and Assembly) Architecture • 40-Bit Wide Accumulators • Single-Cycle (MAC/MPY) with Dual Data Fetch • Single-Cycle, Mixed-Sign MUL Plus Hardware Divide • 32-Bit Multiply Support • Four Sets of Interrupt Context Saving Registers which Include Accumulator and STATUS for Fast Interrupt Handling • Zero Overhead Looping • RAM Memory Built-In Self-Test (MBIST) Clock Management • Internal Oscillator • Programmable PLLs and Oscillator Clock Sources • Reference Clock Output • Fail-Safe Clock Monitor (FSCM) • Fast Wake-up and Start-up • Backup Internal Oscillator Power Management • Low-Power Management Modes (Sleep, Idle, Doze) • Integrated Power-on Reset and Brown-out Reset High-Speed PWM • Eight PWM Pairs • Up to 250 ps PWM Resolution • Dead Time for Rising and Falling Edges • Dead-Time Compensation • Clock Chopping for High-Frequency Operation • PWM Support for: - DC/DC, AC/DC, inverters, PFC, lighting - BLDC, PMSM, ACIM, SRM motors • Fault and Current Limit Inputs • Flexible Trigger Configuration for ADC Triggering Timers/Output Compare/Input Capture • One General Purpose Timer • Peripheral Trigger Generator (PTG): - Up to 15 trigger sources to other peripheral modules - CPU independent state machine-based instruction sequencer • Nine MCCP/SCCP modules which Include Timer, Capture/Compare and PWM: - One MCCP - Eight SCCPs - 16 or 32-bit time base - 16 or 32-bit capture - 4-deep capture buffer • Fully Asynchronous Operation, Available in Sleep Modes

The NCP4304A and NCP4304B, manufactured by ON Semiconductor, are advanced controllers and drivers designed to optimize synchronous rectification in high-efficiency switch mode power supplies (SMPS). These versatile components are suitable for various topologies, including flyback, forward, and half-bridge resonant LLC converters. Featuring an externally adjustable minimum on and off times, the NCP4304A/B effectively mitigates ringing caused by PCB layout and parasitic elements, ensuring reliable and noise-free operation. The components boast an extremely low turn-off delay time of typically 40 ns, high sink current capability, and an automatic package parasitic inductance compensation system, which together maximize the conduction time of the synchronous rectification MOSFET, thereby enhancing SMPS efficiency. The NCP4304A offers a gate drive clamp of 12 V, while the NCP4304B provides a 6 V clamp, facilitating implementation in 24 V output applications. Key features include precise secondary zero current detection with an adjustable threshold, a maximum operating frequency of 500 kHz, and a low startup and standby current consumption. The devices are available in SOIC-8 and DFN8 packages, making them suitable for high power density AC/DC power supplies, notebook adapters, gaming consoles, and other applications demanding high efficiency.

Zero-Drift Amplifier 1 Circuit Rail-to-Rail SC-70-5 #CommonPartLibrary #IntegratedCircuits #Amplifiers #Instrumentation #OPAmp #BufferAmps #Linear #OPA333

Zero-Drift Amplifier 1 Circuit Rail-to-Rail SOT-23-5 #commonpartslibrary #integratedcircuit #linearamplifier #opamp

Zero-Drift Amplifier 1 Circuit Rail-to-Rail 16-TSSOP #commonpartslibrary #integratedcircuit #linearamplifier #opamp

Zero-Drift Amplifier 1 Circuit Rail-to-Rail SOT-23-5 #commonpartslibrary #integratedcircuit #linearamplifier #opamp

Zero-Drift Amplifier 2 Circuit Rail-to-Rail 8-VSSOP #CommonPartsLibrary #IntegratedCircuit #Linear #Amplifier #Instrumentation #OP-Amp #Buffer-Amp #OPA2387

Zero-Drift Amplifier 2 Circuit Rail-to-Rail 8-MSOP #CommonPartsLibrary #IntegratedCircuit #Linear #Instrumentation #OPAmp #BufferAmps #Amplifier

Zero-Drift Amplifier 1 Circuit Rail-to-Rail SOT-23-5 #commonpartslibrary #integratedcircuit #linearamplifier #opamp

Zero-Drift Amplifier 1 Circuit 8-SO #CommonPartsLibrary #IntegratedCircuit #Linear #Amplifier #Instrumentation #OP-Amp #Buffer-Amp #LTC1050

Zero-Drift Amplifier 4 Circuit Rail-to-Rail 14-SOIC #CommonPartsLibrary #IntegratedCircuit #Linear #Amplifier #Instrumentation #OP-Amp #OPA4180

Zero-Drift Amplifier 1 Circuit Rail-to-Rail SC-70-5 #CommonPartsLibrary #IntegratedCircuit #Linear #Amplifier #Op-Amp #TSZ121

Zero-Drift Amplifier 1 Circuit Rail-to-Rail 5-TSOP #CommonPartsLibrary #IntegratedCircuit #Linear #Amplifier #Instrumentatio #OPAmps #Buffer-Amp #NCS333

Zero-Drift Amplifier 4 Circuit Rail-to-Rail 14-SOIC #CommonPartLibrary #IntegratedCircuits #Amplifiers #Instrumentation #OPAmp #BufferAmps #Linear #NCS4325

Zero-Drift Amplifier 4 Circuit Rail-to-Rail 14-SOIC #commonpartslibrary #integratedcircuit #opamp