9.2VC Clamp 21.8A Ipp TVS DIODE SOD-123FL The SMF5.0A is a unidirectional Transient Voltage Suppressor (TVS) diode designed to protect sensitive electronic circuits from electrostatic discharge (ESD), lightning surges, and other transient overvoltage events. It is commonly used on 5V power rails, USB VBUS lines, DC inputs, and general-purpose power protection applications. The device comes in a compact surface-mount SOD-123FL/SMF package suitable for space-constrained PCB designs. Key Features 5V reverse standoff voltage (VRWM) 200W peak pulse power dissipation (10/1000µs waveform) Fast response time for transient suppression Low clamping voltage (~9.2V max) Unidirectional TVS protection Excellent ESD and surge protection capability Compact SOD-123FL / SMF surface-mount package Low leakage current Operating temperature up to +150°C RoHS compliant and halogen-free variants available

The HUSB238A is a highly integratedstand-aloneUSB Type-C® and Power Delivery (PD) Sinkcontroller.The HUSB238A integrates the CClogic, USBPDprotocol and the legacy protocols. The HUSB238A can run in I2C mode andGPIOmode.In I2C mode, an I2C master can access theHUSB238Ato configure settings, read back status andperformadvanced functions such as DRSwap, VDMmessages. The HUSB238A supports APDO, maximum48 V/5 A EPR FPDO and EPR AVSin I2Cmode. While in GPIO mode, the configuration is achievedviathe setting pins. The HUSB238A can beconfiguredtosupport maximum 28 V/3.25 A PDOviaVSETandISET pins, only two resistors are usedtoset thevoltage and current. The ultra-low operation current of theHUSB238Ahelps the system to reduce the total power dissipationand suitable for a battery application. The HUSB238A is available in QFN3 mmx3mm-16Lpackage. Fully Autonomous USB Type-C® and USB PD Sink Controller  USB Type-C® Specification Reversion 2.1 and USB PD Specification Reversion 3.1 Supported  Maximum 48 V/5 A PDO Supported – GPIO Mode: Maximum 28 V/3.25 A EPR FPDO and EPR AVS – I2C Mode: Maximum 48 V/5 A EPR FPDO, EPR AVS and SPR PPS Automatic Legacy Protocols Detection Including BC1.2, Divider 3, QC2.0 Support SOP’ Detection Typical Low Power Operation: IVDD< 75 μA Integrated VBUS Switch Driver Dead Battery Support VBUS Over-voltage Protection (OVP) and Under-voltage Protection (UVP) Over-temperature Protection (OTP) with Programmable Thresholds 2 kV HBM ESD Rating for USB IO Pins Small Package, 16 Lead QFN (3 mm x 3 mm) #CommonPartsLibrary #IntegratedCircuit #PowerManagement

The Semtech SRDA3.3-6 and SRDA05-6 RailClamp® Low Capacitance TVS Arrays are robust surge-rated diode arrays designed to protect high-speed data interfaces from overvoltage conditions caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. These components integrate surge-rated, low capacitance steering diodes and a transient voltage suppression (TVS) diode into a single package, providing protection for six I/O lines and a power supply line. With a low operating voltage of 3.3V for the SRDA3.3-6 and 5V for the SRDA05-6, these devices exhibit low clamping voltage and capacitance below 15pF, making them ideal for applications such as USB power and data line protection, T1/E1 secondary IC side protection, HDSL, SDSL, video line protection, and microcontroller input protection. The SRDA series complies with IEC 61000-4-2 (ESD) standards up to 15kV (air) and 8kV (contact), IEC 61000-4-4 (EFT) standards up to 40A (5/50ns), and IEC 61000-4-5 (Lightning) standards up to 25A (8/20μs). These devices are housed in a JEDEC SO-8 package, are Pb-Free, Halogen-Free, RoHS/WEEE compliant, and feature a solid-state technology design for reliable performance.

The Semtech SRDA3.3-6 and SRDA05-6 RailClamp® Low Capacitance TVS Arrays are robust surge-rated diode arrays designed to protect high-speed data interfaces from overvoltage conditions caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. These components integrate surge-rated, low capacitance steering diodes and a transient voltage suppression (TVS) diode into a single package, providing protection for six I/O lines and a power supply line. With a low operating voltage of 3.3V for the SRDA3.3-6 and 5V for the SRDA05-6, these devices exhibit low clamping voltage and capacitance below 15pF, making them ideal for applications such as USB power and data line protection, T1/E1 secondary IC side protection, HDSL, SDSL, video line protection, and microcontroller input protection. The SRDA series complies with IEC 61000-4-2 (ESD) standards up to 15kV (air) and 8kV (contact), IEC 61000-4-4 (EFT) standards up to 40A (5/50ns), and IEC 61000-4-5 (Lightning) standards up to 25A (8/20μs). These devices are housed in a JEDEC SO-8 package, are Pb-Free, Halogen-Free, RoHS/WEEE compliant, and feature a solid-state technology design for reliable performance.