• Q4 2022 Dogfooding - On Air

    Q4 2022 Dogfooding - On Air

    Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C.

    brooks

    &

    jharwinbarrozo
    +15

    99 Comments

    1 Star

  • Lethal Company Pro Flashlight Power Board V1

    Lethal Company Pro Flashlight Power Board V1

    Lethal Company Pro Flashlight Broken Features: - U2M cannot be line powered from this circuit so the LED driver does not regulate. [Find the acompanying button board here](https://www.flux.ai/markwuflux/lethal-company-pro-flashlight-button-board) -Ultra bright -Makes click noise from speaker -Wirelessly transmits battery life (maybe use Ubo to receive this) -Drive a SST-40 Chinese LED I want this thing to be super bright! The brighter the better, but keep it simple. These LEDs will draw a lot of power, so we need some sort of CC source. It doesn't have to have high bandwidth. I am thinking about a DIY microcontroller buck converter with PID duty cycle control. Mistakes in this V1 design: - No pullup resistor on PG of Module1

    markwuflux

    92 Comments

    1 Star

  • TSAL_KE1_Green

    TSAL_KE1_Green

    Designing a Tractive System Active light(TSAL) circuit for an Electric Vehicle which does the following operations 1. The TSAL itself must have a red light, flashing continuously with a frequency between 2 Hz and 5 Hz and a duty cycle of 50%, active if and only if the LVS is active and the voltage across DC-link capacitors exceeds half the nominal TS voltage 2. The TSAL itself must have a green light, continuously on, active if and only if the LVS is active and ALL of the following conditions are true: ● All AIRs are opened. ● The pre-charge relay is opened. ● The voltage at the vehicle side of the AIRs inside the TSAC does not exceed 60 VDC or 50 VAC RMS. This schematic will include only the Green Light logic. We have to take proper care of High voltage and Low voltage isolation in this schematic because it will have to be implemented on the PCB as well.

    vsdave1616

    39 Comments

    1 Star

  • Motion Detector Reference Design

    Motion Detector Reference Design

    This is a motion detector circuit using an ESP32 microcontroller and PIR sensor. It features USB-C connectivity, RGB LED indication, push buttons and is powered by a 3.3V supply. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #PIR #esp32 #reference-design

    vasyl

    vasyl

    &

    jharwinbarrozo

    34 Comments

    1 Star

  • Q4-2022-Dogfooding-On Air-markwu2001-Remix-R0

    Q4-2022-Dogfooding-On Air-markwu2001-Remix-R0

    Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C.

    markwu2001

    28 Comments

    1 Star

  • Sure Moccasin Point-of-view gun

    Sure Moccasin Point-of-view gun

    230VAC to 5VDC quick charging supported USB circuit.

    sajanawick

    24 Comments

    1 Star

  • WiFi Camera Reference Design

    WiFi Camera Reference Design

    This project uses an ESP32 microcontroller and OV2640 camera to create a WiFi-enabled digital camera. It uses AMS1117 voltage regulators to provide regulated power, a CH340C for USB communication, and includes capacitors and resistors for circuit balance. Ideal for IoT and edge computing tasks. #referenceDesign #project #ESP32 #ESP32WROVER #RF #WIFI #MCU #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design

    vasy_skral

    20 Comments

    1 Star

  • ADM3054BRWZ-RL7 Reference Design

    ADM3054BRWZ-RL7 Reference Design

    This ADM3054BRWZ-RL7-based reference design is a CAN bus transceiver circuit, providing reliable data communication over the CAN network. The design features a range of capacitors and resistors to ensure signal integrity, and a NUP2105L for voltage protection. It's ideal for applications requiring reliable data communication in an automotive or industrial environment. #referenceDesign #project #CANbus #interface #transceiverCircuit #ADM3054 #ADM3054BRWZ-RL7 #referenceDesign #canbus #texas-instruments #template #reference-design #reference-design

    vasy_skral

    &

    19 Comments

    1 Star

  • Various White Carbonite Freezer

    Various White Carbonite Freezer

    Design a circuit that detects the presence of the infrared signal. The circuit should light a red LED when infrared signal is detected otherwise it should light a green LED. You may use NPN transistors, IR LED, Photodiode, Red LED, Green LED and a rectifier diode.

    tefojames

    18 Comments

    1 Star

  • NPN-TRANS-002

    NPN-TRANS-002

    The Ariel AI Chip, a state-of-the-art integrated circuit designed for high-performance computing applications, incorporates an innovative architecture that leverages radical transistor technology to optimize AI and machine learning tasks. At the heart of this chip lies a quad-core CPU operating at a clock speed of 2GHz, distinguished by its part number CPU-RT-4C-2G. The chip's power management is efficiently handled by a DC power supply, specified as DCPS-5V, ensuring a stable 5V input. Key to its operation are two NPN transistors, identified by part numbers NPN-TRANS-001 and NPN-TRANS-002, which, along with a pair of 1kΩ resistors (RES-1K and RES-1K-002) and a 10µF capacitor (CAP-10UF), form the critical signal processing and conditioning circuitry. This assembly is designed for seamless integration into advanced computing systems, particularly those focused on Flux AI environments, where its performance and efficiency can be fully leveraged. The Ariel AI Chip sets a new benchmark in AI computing, offering unparalleled processing power and efficiency for cutting-edge applications.

    radicaldeepscale

    16 Comments

    1 Star

  • Ultrasonic Distance Meter Reference Design

    Ultrasonic Distance Meter Reference Design

    This circuit is an ultrasonic distance meter based on an ATTiny2313 microcontroller. It uses an HC-SR04 ultrasonic sensor to measure distance and displays the results on an OLED display. The power supply is constructed using a Boost converter (TPS613222A) and a 2-cell AA battery. Additionally, it also includes ISP for programming, RESET and START switches, and LED indicators. #project #Template #projectTemplate #ultrasonic #OLED #arduino #attiny2313 #TPS613222A #ISP #referenceDesign #simple-embedded #microchip #template #reference-design .

    vasy_skral

    &

    13 Comments

    1 Star

  • On Air R2 - Thread Enabled

    On Air R2 - Thread Enabled

    R2 w Thread changes: -Moving to Letter Modules for ease of design -Adding MGM210L for Matter on Thread On/Off and intensity control -Shifted A and R letters closer to fix Kerning -Optional: Add unpopulated AA Battery Holder for battery option R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C. #template #arduino-matter

    markwuflux

    11 Comments

    1 Star

  • XL6009 Boost Module DC-DC Adjustable

    XL6009 Boost Module DC-DC Adjustable

    XL6009 Boost Module DC-DC Adjustable Module DC3.0-30V to DC5-35V Output Voltage Power Converter Circuit Board Module 400KHz https://www.amazon.com/HiLetgo-Adjustable-DC3-0-30V-DC5-35V-Converter/dp/B07BNHR4HW/ref=sr_1_3?dchild=1&keywords=XL6009&sr=8-3

    vasy_skral

    10 Comments

    1 Star

  • New Part Template pfZM

    New Part Template pfZM

    A simple voltage divider to showcase how to make parts. A voltage divider is a simple circuit which turns a large voltage into a smaller one. Using just two series resistors and an input voltage, we can create an output voltage that is a fraction of the input. Voltage dividers are one of the most fundamental circuits in electronics.

    mcnoodles

    9 Comments

    1 Star

  • Metal Detector Project

    Metal Detector Project

    This is the circuit my team and I built for my Junior Design Project. I decided to make a PCB for it.

    sonny21

    9 Comments

    1 Star

  • TPS54331 Buck converter 3.3V

    TPS54331 Buck converter 3.3V

    This project appears to be a power supply circuit using the TPS54331 step-down (Buck) converter from Texas Instruments. The target output voltage is 3.3V. It also features electromagnetic interference (EMI) mitigation components such as an inductor, capacitors and a diode. An LED is included for indication purposes. #Buck #TPS54331 #project

    vasy_skral

    8 Comments

    1 Star

  • PGA300ARHHR Reference Design

    PGA300ARHHR Reference Design

    This project is a reference design utilizing Texas Instruments' PGA300ARHHR, a precision analog and digital IC, for signal processing. The circuit also includes a Diodes Incorporated's FZT603QTA Transistor, passive components like resistors and capacitors, and connectors from JST Sales America Inc. #project #referenceDesign #industrialsensing #texas-instruments #template #reference-design

    vasyl

    vasyl

    &

    jharwinbarrozo

    3 Comments

    1 Star

  • [Example] Simulation of AC to DC Converter

    [Example] Simulation of AC to DC Converter

    A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

    shahinma3000

    2 Comments

    1 Star

  • Brake System Plausibility Device Final

    Brake System Plausibility Device Final

    A shutdown circuit for the Penn State Formula SAE Racecar.

    psuser2024

    2 Comments

    1 Star

  • sensor-night-light

    sensor-night-light

    This circuit found detect when is someone present and is the night to turn on a light.

    arunima

    1 Comment

    1 Star

  • Black Starship Controller Rev9

    Black Starship Controller Rev9

    The circuit that will bring humans to Mars! Just kidding.. this is a pcb test board.

    bryan

    1 Comment

    1 Star

  • TP4056_Module

    TP4056_Module

    The TP4056 1A Li-ion Lithium Battery Charging Module with Current Protection – Mini USB is a compact device designed to charge individual lithium ion (Li-Ion) cells that lack their own protective circuit, such as 16550s, with a single cell capacity of 3.7V and 1 Ah or higher. This battery charging module employs the TP4056 charger IC and DW01 battery protection IC to provide a charge current of 1A, which will cease upon completion of the charging process. https://robocraze.com/products/tp4056-lithium-battery-charging-board #PCB #TP4056 #battery

    ihscielle

    1 Comment

    1 Star

  • [Example] Simulation of AC to DC Converter

    [Example] Simulation of AC to DC Converter

    A simulated circuit that demonstrates how diodes in a bridge configuration convert an AC voltage to DC voltage.

    truckfreak

    1 Comment

    1 Star

  • MAX1551 Reference Design

    MAX1551 Reference Design

    This project is a battery charging circuit utilizing a MAX1551 chip. It features a USB and DC power input, with LED status indicators. The design is outfitted with necessary decoupling capacitors and resistors to ensure smooth operation. #project #Template #charger #referenceDesign #batterycharger #MAX1551 #template #bms #analog

    thirdy

    1 Comment

    1 Star

  • Arduino blood glucose meter shield

    Arduino blood glucose meter shield

    Glucose meter is a medical device that determines the approximate concentration of glucose in the blood. A strip containing chemicals that react with glucose in the drop of blood is used for each measurement. Op Amp Circuit description: LMC6484 IC_D is an integrator circuit. LMC6484 IC_A and IC_C are configured as unity gain buffer amplifiers. LMC6484 IC1B is configured as a trans impedance amplifier. Arduino is used for processing of the measured glucose level. The Arduino use the built in ADC module for analog to digital conversion. Further, the Arduino helps to detect the strip also.

    erwan

    1 Comment

    1 Star