5A 125V 125V Fuse Board Mount (Cartridge Style Excluded) Surface Mount 2-SMD, Square End Block The 0451005.MR is a surface-mount (SMD) board-level fuse from Littelfuse, part of the NANO²® 451 series, designed to provide overcurrent protection in compact electronic circuits. It is a fast-acting fuse used to protect sensitive components from damage caused by short circuits or overload conditions, especially in high-density PCB designs. Key Features Type: Surface-mount chip fuse Designed for PCB mounting (2-SMD package) Current Rating 5 A nominal current Voltage Rating 125 V AC / 125 V DC Fast-Acting Response Quickly interrupts fault currents to protect circuitry Compact Size Approx. 6.10 mm × 2.69 mm × 2.69 mm Ideal for space-constrained PCB designs High Breaking Capacity Around 50 A interrupt rating Wide Operating Temperature -55°C to +125°C Construction Ceramic body for high thermal and mechanical stability Mounting Type Surface mount (SMD), suitable for automated PCB assembly Agency Approvals UL, CSA, PSE certified (varies by variant)

Air Quality Sensors VOC and NOx (MOX) Gas Pollutant Sensor The SGP41-D-R4 is a compact digital gas sensor developed by Sensirion for indoor air quality monitoring applications. It is designed to detect volatile organic compounds (VOC) and nitrogen oxides (NOx) using Sensirion’s CMOSens® sensor technology. The device integrates sensing elements, analog front-end circuitry, calibration memory, and digital signal processing within a miniature surface-mount package, enabling accurate and reliable environmental sensing with minimal external components. The sensor communicates through a standard I²C digital interface and is optimized for low-power operation, making it suitable for battery-powered and portable electronic systems. The SGP41 is intended for use in air purifiers, HVAC systems, smart home devices, wearable electronics, environmental monitoring equipment, and other applications requiring real-time indoor air quality assessment. The device supports humidity-compensated measurements when paired with an external humidity and temperature sensor, improving long-term stability and measurement accuracy. Factory calibration eliminates the need for manual calibration during manufacturing. Key Features Digital VOC and NOx gas sensing CMOSens® technology integration I²C communication interface Fully calibrated and linearized output Humidity compensation capability Low power consumption operation Compact DFN surface-mount package Fast response and recovery characteristics Optimized for indoor air quality applications RoHS and halogen-free compliant Electrical Characteristics Supply voltage operation compatible with low-voltage embedded systems Low average current consumption suitable for portable devices Integrated digital signal processing and calibration memory I²C serial communication support with standard addressing Stable operation across industrial temperature ranges Mechanical Characteristics Small DFN package optimized for compact PCB layouts Surface-mount assembly compatible Low-profile package suitable for space-constrained designs Moisture-sensitive device requiring proper handling during assembly Functional Characteristics Simultaneous VOC and NOx sensing capability Real-time indoor air quality monitoring Compensation support for environmental humidity effects Long-term measurement stability Fast startup and measurement readiness Designed for continuous sensing applications Typical Applications Indoor air quality monitoring systems Smart thermostats and HVAC controllers Air purifiers and ventilation systems Smart home and IoT devices Portable environmental monitoring equipment Wearable health and wellness devices Building automation systems Consumer electronics requiring air quality detection #Sensor #Transducer #Gas#Sensor #SGP41

Audio D/A Converter ICs SABRE 8 Channel Smart DAC with Line Drivers, ASP2, 7mmx7mm, 48-QFN The ES9082Q is a high-performance stereo digital-to-analog converter (DAC) developed by ESS Technology for premium audio applications requiring exceptional sound quality, low power consumption, and compact integration. It utilizes the patented HyperStream® architecture and Time Domain Jitter Eliminator technology to deliver highly accurate audio reproduction with ultra-low distortion and noise characteristics. The device supports high-resolution PCM and DSD audio formats, making it suitable for portable audio devices, USB DACs, digital media players, automotive infotainment systems, wireless audio products, and professional audio equipment. The ES9082Q integrates advanced digital filtering, low-jitter clock management, and flexible audio interface support while maintaining efficient power operation for battery-powered applications. Designed for compact embedded audio systems, the ES9082Q provides excellent dynamic range and signal fidelity while minimizing external component requirements. Its architecture enables high-quality playback performance across a wide range of consumer and industrial audio applications. Electrical Characteristics Supply voltage supports low-voltage digital and analog power domains optimized for portable and embedded applications. The device operates with low power consumption while maintaining high audio performance. Integrated power management supports efficient system-level implementation. Audio Performance The converter supports high-resolution stereo audio output with advanced oversampling and noise shaping technology. It delivers ultra-low total harmonic distortion plus noise performance and high dynamic range suitable for high-fidelity audio playback systems. PCM audio data rates support standard and high-resolution formats up to 32-bit depth with sampling frequencies extending to high-definition audio ranges. Native DSD playback capability is also supported for audiophile-grade applications. Digital Audio Interface The ES9082Q supports industry-standard serial audio interfaces including I²S, left-justified, and related digital audio communication protocols. Flexible master and slave clocking configurations enable compatibility with a wide variety of host processors and audio controllers. Integrated jitter suppression circuitry improves clock stability and minimizes timing-induced audio artifacts. Integrated Features The device incorporates digital interpolation filters, volume control functions, soft mute capability, and programmable audio processing features. Internal PLL and clock management circuitry reduce external timing component requirements. Built-in low-noise analog output stages simplify audio signal chain design and reduce overall PCB footprint. Package Information The ES9082Q is provided in a compact surface-mount package optimized for space-constrained audio products. The package supports automated assembly and high-density PCB layouts commonly used in portable and embedded systems. Typical Applications Applications include portable audio players, USB DAC modules, wireless speakers, automotive audio systems, headphones, digital amplifiers, embedded multimedia devices, smart home audio equipment, and professional audio playback systems. #commonpartslibrary #integratedcircuit #audioic #dac #stereodac #esstechnology #es9082q #highresolutionaudio #audiophile #digitalaudio #analogaudio #i2s #dsd #pcm #embeddedaudio #consumerelectronics #portableaudio #usbdac #hifi #signalprocessing #lownoise #lowdistortion #electronicsdesign #pcbdesign #hardwareengineering #electroniccomponents #semiconductor #mixedsignal #audioelectronics #soundquality

8 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole ## Engineering Specification ## General Description The **1726202** is a Phoenix Contact **MKKDSN series PCB terminal block** designed for compact and reliable wire-to-board connection in printed circuit board assemblies. It is intended for applications that require secure field wiring, serviceable conductor termination, and stable electrical connection between external wiring and PCB circuitry. The component is suitable for industrial control systems, automation equipment, power interfaces, instrumentation, building controls, and general electronic hardware assemblies. ## Device Identification Manufacturer Part Number: **1726202** Manufacturer: **Phoenix Contact** Product Name: **MKKDSN 1,5/ 8-5,08** Product Family: **MKKDSN 1,5** Product Line: **COMBICON Terminals** Device Category: **Connector and Interconnect Component** Device Type: **PCB Terminal Block** Connection Type: **Wire-to-Board Terminal Block** Termination Method: **Screw Connection with Tension Sleeve** Mounting Type: **Through-Hole PCB Mount** ## Functional Description The device functions as a fixed printed circuit board terminal block that allows external conductors to be connected directly to PCB circuits. The screw-clamp connection secures the conductor mechanically while maintaining electrical continuity through the terminal body and solder pins. This makes the component suitable for wiring interfaces that require durability, accessibility, and field-service capability. ## Mechanical Description The terminal block uses a compact green housing with a two-row terminal arrangement and side-access conductor entry. Its layout supports dense wiring connection on a printed circuit board while maintaining practical access for conductor insertion and screw tightening. The through-hole solder pins provide mechanical stability and electrical connection to the host PCB. ## Electrical Description The component is intended for low-voltage power and signal connection applications within the manufacturer’s specified current and voltage ratings. It supports conductor connection for typical industrial and control wiring requirements when used with compatible wire sizes, correct strip length, and proper tightening torque. ## Material and Contact Description The terminal block uses an insulating housing with internal conductive contact elements designed to transfer current from the inserted conductor to the PCB solder connection. The screw connection with tension sleeve helps maintain stable contact pressure and reliable conductor retention during normal operating conditions. ## Mounting and Assembly Description The **1726202** is intended for through-hole PCB soldering, including wave-solder assembly processes. The PCB layout should follow the manufacturer’s recommended hole size, pad pattern, spacing, and soldering guidelines. The component should be positioned to allow safe conductor insertion, screwdriver access, and adequate clearance from nearby parts or enclosure walls. ## Application Suitability The device is suitable for industrial control boards, automation modules, relay boards, power supply interfaces, building automation equipment, instrumentation systems, sensor wiring interfaces, signal distribution boards, and other electronic products requiring secure PCB wire termination. ## Design Considerations The design should account for conductor size compatibility, current carrying requirement, voltage rating, creepage and clearance spacing, tightening torque, solder joint strength, wire routing, and user access during installation or maintenance. The terminal block should not be used beyond the manufacturer’s specified electrical, thermal, or mechanical limits. ## Hashtags #commonpartslibrary #terminalblock #pcbterminalblock #phoenixcontact #mkkdsn #mkkdsnterminalblock #combicon #wiretoboard #screwterminal #fixedterminalblock #throughholecomponent #wavesoldering #soldermount #connector #interconnect #fieldwiring #industrialelectronics #automationequipment #controlsystems #powerinterface #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #engineeringparts #componentlibrary #electronicsengineering

The MC1413, MC1413B, and NCV1413B, manufactured by ON Semiconductor, are high voltage, high current Darlington transistor arrays consisting of seven NPN Darlington pairs. These arrays are specifically designed to interface with 5.0V TTL or CMOS logic levels, making them ideal for a wide range of applications, including driving lamps, relays, or printer hammers in both industrial and consumer settings. The integration of high breakdown voltage and internal suppression diodes provides robust protection against problems associated with inductive loads, while the ability to handle peak inrush currents up to 500 mA enables the direct drive of incandescent lamps. Available in Pb-Free packages, the MC1413 series offers versatility for design in environmentally conscious applications. Notably, the NCV1413B variant adheres to automotive and other stringent standards requiring site and control changes, highlighting its suitability for use in safety-critical automotive environments. This family of transistor arrays is available in both PDIP-16 and SOIC-16 packages, ensuring compatibility with a broad range of PCB layouts and assembly processes.

Bipolar (BJT) Transistor Array 8 NPN Darlington 50V 500mA Surface Mount 18-SOIC The ULN2803ADW is a high-voltage, high-current Darlington transistor array designed for interfacing low-level digital logic circuits with high-power loads. The device integrates eight NPN Darlington pairs with common-emitter outputs and suppression diodes for inductive load driving. It is commonly used in relay drivers, LED matrix control, solenoid actuation, motor drivers, lamp control, and industrial automation interfaces. The integrated clamp diodes enable direct driving of inductive loads without requiring additional external protection circuitry. The input stage is compatible with standard TTL and CMOS logic levels, making the device suitable for microcontroller, FPGA, and processor-based systems. The ULN2803ADW provides compact multi-channel switching capability in a wide-body SOIC surface-mount package optimized for automated assembly and high-density PCB layouts. Key Features Eight-channel NPN Darlington transistor array High-current sink driver outputs Integrated flyback suppression diodes TTL and CMOS compatible inputs Open-collector outputs Suitable for inductive and resistive loads High output voltage capability Parallel output operation supported for increased current handling Wide operating voltage range Surface-mount SOIC wide-body package Industrial and embedded control application support Electrical Characteristics Darlington transistor output configuration High DC current gain Low input current requirement Common-cathode clamp diode structure Open-collector output topology Logic-level input compatibility High-voltage output tolerance Multi-channel simultaneous switching support Applications Relay and solenoid drivers Stepper motor interfaces LED and lamp driving Industrial automation systems PLC output stages Embedded control systems Printer and actuator control Automotive electronics Logic buffer and level shifting applications Package Information Package Type: SOIC Wide Body Mounting Type: Surface Mount Multi-pin integrated driver package RoHS compliant options available #commonpartslibrary #integratedcircuit #driveric #darlingtonarray #powermanagement #industrialelectronics #embeddedhardware #relaydriver #motorcontrol #automationelectronics

Battery Holder (Open) 18650 1 Cell SMD (SMT) Tab The Keystone 1042 is a surface-mount battery holder designed by Keystone Electronics for 18650 cylindrical lithium-ion batteries. It is used to securely mount and electrically connect a single 18650 cell directly onto a PCB. It is commonly found in battery-powered embedded systems, backup power modules, industrial controllers, and portable electronics where reliable and tool-less battery replacement is needed. Key Features Battery Type Supports 1 × 18650 lithium-ion cell Surface Mount (SMT) Design Directly solderable to PCB for automated assembly High-Temperature Nylon Housing Suitable for reflow soldering processes Secure Battery Retention Holds the cell firmly in place while allowing easy insertion/removal Tool-Free Battery Replacement No tools required to install or remove the battery Polarized Design Prevents incorrect battery insertion Durable Contacts Typically tin-plated or gold-plated bronze contacts for reliable conductivity Wide Temperature Range Industrial-grade operation suitable for harsh environments RoHS Compliant Environmentally compliant construction Typical Applications Battery backup systems (RTC / memory backup) IoT and embedded devices Industrial control boards Portable electronics Data loggers and monitoring systems Consumer battery-powered products #Battery-Holder

The A767KN476M1HLAE029 is a surface-mount aluminum electrolytic capacitor designed for bulk energy storage, power supply filtering, ripple current suppression, and voltage stabilization applications. This capacitor utilizes aluminum electrolytic technology to provide high capacitance density in a compact package, making it suitable for modern power management and industrial electronic systems. The device is optimized for applications requiring stable capacitance performance, long operational life, and reliable operation under varying electrical and environmental conditions. It is commonly used in switching power supplies, DC-DC converters, industrial control equipment, communication systems, consumer electronics, and embedded power distribution networks. Its low impedance characteristics and high ripple current capability support efficient power filtering and transient response improvement in electronic circuits. The surface-mount construction enables automated assembly processes and compact PCB integration in high-density designs. Engineering Specification Device Type Aluminum electrolytic capacitor Capacitor Technology Surface-mount aluminum electrolytic construction Capacitance Characteristics High-capacitance energy storage and filtering capability Electrical Characteristics Optimized for power supply filtering and voltage stabilization Impedance Performance Low impedance design for efficient ripple suppression Ripple Current Capability Suitable for high-ripple-current power applications Thermal Characteristics Stable operation across industrial electronic operating conditions Reliability Features Long operational lifetime and robust electrical performance Mounting Style Surface mount technology Package Structure Chip-type aluminum electrolytic capacitor Environmental Characteristics Designed for commercial and industrial electronic environments Applications Switching power supplies DC-DC converters Power management systems Industrial automation Communication equipment Embedded systems Consumer electronics Voltage filtering circuits Energy storage applications Power distribution networks Manufacturer Commonly associated with KEMET aluminum electrolytic capacitor product families #commonpartslibrary #electrolyticcapacitor #aluminumcapacitor #passivecomponents #powerelectronics #powersupply #filtercapacitor #energystorage #surfaceountcomponents #embeddedhardware #electronicsdesign #dcdcconverter #industrialelectronics #powermanagement #ripplefiltering

32 Bit Analog to Digital Converter 5, 10 Input 1 Sigma-Delta 28-TSSOP The ADS1263IPW is a high-precision, low-noise analog-to-digital converter designed for demanding industrial, instrumentation, and sensor measurement applications. Manufactured by Texas Instruments, this device integrates a delta-sigma ADC architecture with programmable gain amplification, precision voltage reference support, sensor biasing functions, and extensive diagnostic capabilities. It is optimized for applications requiring extremely high resolution and accuracy when measuring low-level analog signals. The device supports direct interfacing to bridge sensors, thermocouples, RTDs, pressure sensors, strain gauges, and other precision transducers. Integrated system monitoring and fault detection features simplify implementation in safety-critical and high-reliability systems. Flexible input multiplexing and multiple data-rate options allow the converter to be used across a wide range of precision data acquisition applications. The ADS1263IPW communicates through a standard SPI-compatible serial interface and operates from low-voltage analog and digital supplies. The device is packaged in a thermally efficient TSSOP package suitable for compact embedded system designs. Electrical Characteristics The converter utilizes a delta-sigma ADC core with extremely high effective resolution and low input-referred noise performance. It supports differential and single-ended analog input configurations with programmable gain settings for low-level sensor measurements. The integrated programmable gain amplifier supports multiple gain selections for direct amplification of small analog signals. The converter includes internal offset and gain calibration functions to improve system-level measurement accuracy. The device provides low drift characteristics and high common-mode rejection performance suitable for precision industrial environments. Analog Features The converter supports multiple analog input channels through an integrated input multiplexer. Internal sensor bias current sources are available for RTD and resistive sensor excitation applications. Integrated digital filtering options allow optimization between noise performance and conversion speed. Simultaneous rejection of power-line interference frequencies is supported for industrial measurement systems. The device includes internal temperature sensing and diagnostic monitoring functions for enhanced system reliability. Digital Interface Communication is implemented through an SPI-compatible serial interface supporting flexible host controller integration. The interface supports command-based register access, data readback, and configuration management. Programmable data rates allow balancing between throughput and precision requirements. Power Requirements The device operates from separate analog and digital supply rails to improve noise isolation and measurement accuracy. Low-power operating modes are supported for energy-sensitive applications. Protection and Diagnostics Integrated fault detection and monitoring functions include sensor open-circuit detection, reference monitoring, supply monitoring, and internal self-test capability. These features improve reliability in industrial and safety-oriented systems. Package Information The ADS1263IPW is supplied in a TSSOP package with fine-pitch lead spacing suitable for high-density PCB layouts and automated assembly processes. Typical Applications Industrial process control systems Precision data acquisition equipment Temperature measurement systems Pressure and bridge sensor interfaces Weigh scale and load-cell instrumentation Laboratory and test instrumentation Medical instrumentation Energy monitoring and metering systems #commonpartslibrary #integratedcircuit #analog #digital #converter

16 Bit Digital to Analog Converter 1 10-VSSOP The DAC80501MDGSR is a high-precision, single-channel digital-to-analog converter developed by Texas Instruments for industrial, instrumentation, and embedded control applications requiring accurate voltage output generation. The device integrates a low-drift voltage reference, precision output buffer, and serial peripheral interface communication into a compact low-power solution optimized for high-resolution signal generation. Designed for applications such as programmable power supplies, process control systems, automated test equipment, and sensor calibration, the device delivers excellent linearity, low noise performance, and stable output characteristics across varying environmental conditions. The integrated architecture minimizes external component requirements while maintaining high accuracy and long-term reliability. The converter supports rail-to-rail output operation and offers flexible reference configurations to accommodate different system architectures. Its SPI-compatible digital interface enables straightforward integration with microcontrollers, processors, and FPGA-based systems. Electrical Characteristics The device operates from a single analog supply and supports precision voltage output generation with monotonic performance across the full operating range. Integrated precision reference circuitry provides low temperature drift and stable output characteristics suitable for high-accuracy measurement and control systems. Low glitch energy, low offset error, and low gain error characteristics improve output stability during code transitions. The output amplifier is capable of driving moderate capacitive loads while maintaining signal integrity and settling performance. Interface and Control Communication is implemented through a high-speed SPI-compatible serial interface supporting standard synchronous digital communication protocols. The interface allows direct programming of DAC output codes and internal configuration registers. The device supports daisy-chain capable serial communication architecture for simplified expansion in multi-device systems. Internal registers provide control of reference operation, power management, and output configuration functions. Power Management The DAC80501MDGSR incorporates low-power operating modes intended for energy-sensitive applications. Integrated power-down functionality reduces current consumption during inactive system states while preserving configuration integrity. Internal circuitry is optimized for low quiescent current operation without compromising output precision or dynamic response performance. Package Information The device is supplied in a compact VSSOP surface-mount package suitable for space-constrained industrial and embedded designs. The package configuration supports automated assembly processes and standard PCB manufacturing techniques. Typical Applications Typical applications include industrial automation, programmable voltage sources, data acquisition systems, sensor simulation, instrumentation equipment, motor control systems, and precision calibration platforms. The device is particularly suitable for systems requiring stable and repeatable analog voltage generation with minimal external circuitry. #commonpartslibrary #integratedcircuit #analog #digital #converter