• PCB Business Card

    PCB Business Card

    Change History from V1: -13.56MHz tuning -larger instruction font -put some stuff on the back I wanted to create a business card that has some functionality and shows off a bit of my portfolio IRL: -NFC to my flux page -here's the awesome [instructables](https://www.instructables.com/PCB-Business-Card-With-NFC/) -Put a bunch of modules on it Find the BoM [here](https://www.digikey.com/short/2db2vnmp)

    flux

    +

    0 Uses

    3 Comments

    2 Stars

  • PC Game Controller Any Help?

    PC Game Controller Any Help?

    I don't want to buy an Xbox Controller, so I'm just making one by myself

    afnailon

    +

    +4

    0 Uses

    0 Comments

    2 Stars

  • Drone

    Drone

    This PCB is for a quad copter drone. The drone will use a 4S lipo battery as a power supply and each of the motors will use 30Amp ESC's. The microcontroller that handles the RF signals is a Raspberry Pi Pico.

    rafaelzasas

    0 Uses

    211 Comments

    2 Stars

  • SelfCare Plant Final Design

    SelfCare Plant Final Design

    This project is a reference design for an ESP32-WROOM-32E based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #reference-design

    orlando113

    0 Uses

    173 Comments

    2 Stars

  • USB to Serial Breakout - FT232RL

    USB to Serial Breakout - FT232RL

    This is the SparkFun USB to Serial Breakout for the FT232RL, a small board with a built in USB to serial UART interface. This little breakout is built around the FT232RL IC from FTDI, with an internal oscillator, EEPROM, and a 28-pin SSOP package this is a serious little chip.

    adrian95

    0 Uses

    39 Comments

    2 Stars

  • 7-Segment Controller Rev B

    7-Segment Controller Rev B

    This is a 7-segment controller. It runs on a 3-bit counter so the count is from 0-7. Buttons to toggle reset, pause, increment. Knobs to control speed and lighting configuration. Try the simulation here: https://www.flux.ai/jbreidfjord-dev/7-seg-3-bit-counter

    jlamflux

    0 Uses

    38 Comments

    2 Stars

  • STM32 Ethernet board

    STM32 Ethernet board

    It is a board based on STM32L4 with a built-in ethernet IC W5500 that allows you to create IoT projects based on the modern ARM Cortex®-M4 core. A connector with SWD interface and USB C for communication are provided for the firmware #IoT #ARM #STM #Ethernet #W5500 #IC #project

    vasyl

    0 Uses

    29 Comments

    2 Stars

  • SparkFun Load Cell Amplifier - HX711

    SparkFun Load Cell Amplifier - HX711

    The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell, and with some calibration you’ll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control or simple presence detection.

    adrian95

    0 Uses

    28 Comments

    2 Stars

  • Robo Project

    Robo Project

    The Robo Project is a mobile robotic platform featuring a Particle Argon board, 4 motor-wheels controlled by L293D drivers, and an HC-SR04 ultrasonic sensor for obstacle detection. It's ideal for exploration, remote control, and robotics education. #project #robot #template #L293D #car

    datnapafunk

    +

    0 Uses

    25 Comments

    2 Stars

  • The Green Dot 2040E5 Board

    The Green Dot 2040E5 Board

    The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #Seeed #XIOA #LoRa #RP2040 #IoT

    kerry

    0 Uses

    24 Comments

    2 Stars

  • Arduino ATMEGA2560-16AU Template

    Arduino ATMEGA2560-16AU Template

    Arduino Template based on ATMEGA2560-16AU. This MCU is used in Arduino Mega2560, Arduino Arduino Mega ADK, and some other. This template is a good starting point for your Arduino based project. #Arduino #mega #2560 #ATMEGA2560 #template #project #project-template

    vasy_skral

    0 Uses

    22 Comments

    2 Stars

  • Gesture Light Switch Relay Reference Design

    Gesture Light Switch Relay Reference Design

    This project is a Gesture Light Switch Relay Reference Design. It involves an STM32 microcontroller (STMicroelectronics) that interacts with an APDS-9960 sensor (Broadcom) to detect hand gestures. The gesture data is used to control a Toshiba TLP175A relay and an Everlight tri-color LED to switch the light and change colors, respectively. Power is supplied by a Diodes Incorporated's AP2112K-3.3TRG1 regulator. #referenceDesign #edge-computing #edgeComputing #stm #relay #sensors #reference-design

    vasyl

    0 Uses

    21 Comments

    2 Stars

  • Switched-Mode Power Supply (SMPS)

    Switched-Mode Power Supply (SMPS)

    This project is a Switched-Mode Power Supply (SMPS) design. The design incorporates an AC DC Converter (NCP1203D100R2), polarized capacitors, resistors, diodes, connectors, a transistor, a transformer and an integrated circuit. #AC #DC #POWER #NCP1203 #project

    vasyl

    0 Uses

    19 Comments

    2 Stars

  • The Green Dot 2040E5 Board krN5

    The Green Dot 2040E5 Board krN5

    The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #Seeed #XIOA #LoRa #RP2040 #IoT

    nico

    0 Uses

    18 Comments

    2 Stars

  • FM_Transmitter

    FM_Transmitter

    This is one of the simplest FM transmitters that can be built. It does not require any tuning, and transmit frequency is crystal locked to 90MHz. It eliminates frequency drift common to LC-based FM transmitters. This design is best suited for broadcasting voice or music up to a distance of fifty metres depending on the antenna used.

    jecstronic

    0 Uses

    17 Comments

    2 Stars

  • LoRa to WiFi Gateway Reference Design

    LoRa to WiFi Gateway Reference Design

    This project is a LoRa to WiFi Gateway using an ESP32 microcontroller. The design incorporates a LoRa transceiver and a WiFi module to facilitate data transfer between LoRa and WiFi protocols. This gateway can be directly implemented in IoT-based applications where field devices using LoRa need to communicate with WiFi-enabled devices. #referenceDesign #project #ESP32 #LoRa #lora #hub #gateway #ESP32WROOM #RF #WIFI #MCU #referenceDesign #edge-computing #espressif #seeed #seeed-technology #reference-design

    vasy_skral

    +

    0 Uses

    15 Comments

    2 Stars

  • Aquatimer

    Aquatimer

    AquaTimer is a programmable timer for 12V devices such as lighting, solenoid valves or pumps not only for aquariums. It has three switchable channels for currents up to 2A each and up to 5A in total. Connected lighting can be dimmed if desired and slowly faded in and out to simulate sunrises and sunsets. The internal RTC of the ATtiny is used as a clockwork in conjunction with a 32.768kHz crystal. A backup battery keeps the clock running even if the external power supply is interrupted. Settings are made using three buttons and the OLED display.

    jecstronic

    0 Uses

    14 Comments

    2 Stars

  • BQ25895 Reference Design

    BQ25895 Reference Design

    This project is a reference design based on the BQ25895, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #project #BQ25895 #ReferenceDesign #charger #BatteryManagemen #referenceDesign #bms #texas-instruments #template #reference-design #polygon

    vasy_skral

    +

    0 Uses

    14 Comments

    2 Stars

  • Picobuck Led Driver (AL8805W5)

    Picobuck Led Driver (AL8805W5)

    (AL8805W5) The PicoBuck LED Driver is an economical and easy to use driver that will allow you to control and blend three different LEDs on three different channels. By default, each channel is driven at 330mA; that current can be reduced by either presenting an analog voltage or a PWM signal to the board. Version 12 of the board adds a solderable jumper that can be closed to increase the maximum current to 660mA. The new voltage regulator also increased the voltage rating on the various components on the board, allowing it to be used up to the full 36V rating of the AL8805 part.

    adrian95

    +

    0 Uses

    13 Comments

    2 Stars

  • Jellybean

    Jellybean

    The best way to have a friend is to build one. Jellybean is a robot friend whose gonna be right with you. Jellybean has been designed with a number of sensors to be able to interact with the environment and with the owner.

    collinsemasi

    0 Uses

    12 Comments

    2 Stars

  • Raspberry Pi 3B+ Hat Template

    Raspberry Pi 3B+ Hat Template

    Template for Raspberry Pi 3 Model B+ Shield. Include an official pinout so you will always know Raspberry Pi names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Raspberry Pi itself along with the board outline on the silkscreen. #RaspberryPi #Raspberry #raspberry #raspberrypi #Pi #RPi #Shield #template #project #project-template

    vasy_skral

    0 Uses

    10 Comments

    2 Stars

  • VL53L4CD Reference Design

    VL53L4CD Reference Design

    This project is a reference design for a VL53L4CD-based sensor circuit. It incorporates the use of a Texas Instruments LP5907MFX-2.8/NOPB to regulate the supply voltage. #referenceDesign #VL53L4CD #project #template #LIDAR #sensor #distance #referenceDesign #industrialsensing #stm #template #reference-design #polygon

    vasy_skral

    0 Uses

    7 Comments

    2 Stars

  • Interruptor de luz con control gestual

    Interruptor de luz con control gestual

    This project is a Gesture Light Switch Relay Reference Design. It involves an STM32 microcontroller (STMicroelectronics) that interacts with an APDS-9960 sensor (Broadcom) to detect hand gestures. The gesture data is used to control a Toshiba TLP175A relay and an Everlight tri-color LED to switch the light and change colors, respectively. Power is supplied by a Diodes Incorporated's AP2112K-3.3TRG1 regulator. #referenceDesign #edge-computing #edgeComputing #stm #relay #sensors #reference-design

    jorgeariasuisrael

    0 Uses

    5 Comments

    2 Stars

  • Simple Charger Modul

    Simple Charger Modul

    This is a simple charger modul that can be connected to a DC generator or solar panel at the input and a battery at the output

    yogi-alfian-saputra

    0 Uses

    4 Comments

    2 Stars

  • 619 J Stepper

    619 J Stepper

    This project is an open source micro-controller board used to drive a stepper motor in closed loop mode. The board is generally used on 3D printer steppers or CNC steppers to prevent losing steps. The project is inspired by Tropical labs: Mechaduino board #motorControllers

    adrian95

    0 Uses

    3 Comments

    2 Stars