Charger IC Multi-Chemistry 32-QFN (4x4) The BQ25730RSNR is a highly integrated synchronous buck battery charger and system power management IC developed by Texas Instruments for applications requiring efficient charging of multi-cell lithium-ion and lithium-polymer batteries. The device is optimized for USB Type-C, USB Power Delivery, industrial, and portable embedded systems where high charging efficiency, flexible power management, and compact implementation are required. The charger integrates high-side and low-side MOSFET gate drivers along with advanced power path management features, enabling efficient battery charging while simultaneously powering the system load. The architecture supports NVDC power path operation, allowing stable system voltage regulation even when the battery is deeply discharged or absent. The device supports a wide operating input voltage range and programmable charging parameters suitable for various battery chemistries and capacities. Integrated input current optimization and dynamic power management help maximize available adapter power while preventing overload conditions. The BQ25730RSNR communicates with the host processor through an I²C interface, enabling software configuration, telemetry monitoring, and fault management. Internal ADC functionality provides real-time monitoring of charging voltage, current, temperature, and system operating conditions. Its high integration level reduces external component count and PCB area, making it suitable for compact industrial and portable power applications. Electrical Characteristics Wide input voltage operating range compatible with USB PD adapters and industrial power sources. Supports multi-cell lithium-ion and lithium-polymer battery charging configurations. High-efficiency synchronous buck charging architecture. Programmable charge current and charge voltage through digital control interface. Integrated ADC for system telemetry and power monitoring. Dynamic power management optimizes adapter utilization and system stability. Low standby current operation for battery-powered systems. Charging Features Constant current and constant voltage charging modes. Programmable input current limiting for USB and adapter compliance. Battery preconditioning and charge termination functionality. Support for fast charging operation with thermal regulation. Power path management enables simultaneous battery charging and system operation. Automatic recharge and battery maintenance functionality. Protection Features Input overvoltage protection. Battery overvoltage and overcurrent protection. Thermal regulation and thermal shutdown protection. Short-circuit and fault condition protection. Battery temperature monitoring support using external NTC thermistors. Reverse current protection and adapter isolation. Interface and Control I²C serial communication interface for configuration and monitoring. Programmable charging profiles and operating parameters. Interrupt and status reporting capabilities. Integrated telemetry reporting for voltage, current, and temperature measurements. Autonomous operation capability with minimal host intervention. Package Information Package type is WQFN. Compact thermally enhanced surface-mount package. Optimized for automated PCB assembly and high-density layouts. Applications USB Type-C and USB Power Delivery systems. Industrial portable electronics. Embedded computing platforms. Portable medical and instrumentation equipment. Battery-powered industrial controllers. Handheld terminals and data acquisition systems. Portable consumer and commercial electronics. #commonpartslibrary #integratedcircuit #powermanagement #batterycharger

Charger IC Lithium Ion 49-WLP (3.46x3.46) The MAX77962 is a high-performance wide-input 3.2A buck-boost charger with a Smart Power Selector™ and operates as a reverse buck without an additional inductor, allowing the IC to power USB On-the-Go (OTG) accessories. The device integrates low-loss power switches, and provides small solution size, high efficiency, low heat, and fast battery charging. The reverse buck has true-load disconnect and is protected by an adjustable output current limit. The device is highly flexible and programmable through I2C configuration or autonomously through resistor configuration. The battery charger includes a Smart Power Selector to accommodate a wide range of battery sizes and system loads. The Smart Power Selector allows the system to start up gracefully when an input source is available even when the battery is deeply discharged (dead battery) or missing. For battery safety/authentication reasons, the IC can be configured to keep charging disabled, and allow the DC-DC to switch and regulate the SYS voltage. The system processor can later enable charging using the appropriate I2C commands. Alternatively, the IC can be configured to automatically start charging. ● 3.5V to 23V Input Operating Range, 30VDC Withstand Voltage ● 97% Peak Efficiency at 9VIN/7.4VOUT/1.5AOUT ● Reverse Leakage Protection ● 50mA to 3.15A Programmable Input Current Limit ● 50mA to 3.2A Programmable Constant Current Charge ● Remote Differential Voltage Sensing ● 600kHz or 1.2MHz Switching Frequency Options ● System Instant On with Smart Power Selector PowerPath ● Charge Safety Timer ● Die Temperature Regulation with Thermal Foldback Loop ● Input Power Management with Adaptive Input Current Limit (AICL) and Input Voltage Regulation ● 10mΩ BATT to SYS Switch, Up to 10A Overcurrent Threshold ● Reverse Buck Mode 5.1V/1.5A to Support USB OTG ● JEITA Compliant with NTC Thermistor Monitor ● I 2C or Resistor Programmable ● 3.458mm x 3.458mm 49-Bump WLP #CommonPartsLibrary #IntegratedCircuit #PowerManagement #MAX77962

Audio Audio Signal Processor 3 Channel 38-TSSOP #commonpartslibrary #integratedcircuit #audio #signal #processor

- Voltage Regulator IC 1 Output 30-FC2QFN (4x4) The MAX77960B/MAX77961B are high-performance wide-input 3A (MAX77960B)/6A (MAX77961B) buckboost chargers with Smart Power Selector™ and operate as a reverse buck converter without an additional inductor, allowing the ICs to power USB on-the-go (OTG) accessories. The devices integrate low-loss power switches and provide high efficiency, low heat, and fast battery charging in a small solution size. The reverse buck has true load disconnect and is protected by an adjustable output current limit. The devices are highly flexible and programmable through I2C configuration or autonomously through resistor configuration. The battery charger includes the Smart Power Selector to accommodate a wide range of battery sizes and system loads. The Smart Power Selector allows the system to start up smoothly when an input source is available even when the battery is deeply discharged (dead battery) or missing. For battery safety/authentication reasons, the ICs can be configured to keep charging disabled, and allow the DC-DC to switch and regulate the SYS voltage. The system processor can later enable charging using I2C commands as appropriate. Alternatively, the ICs can be configured to automatically start charging. #CommonPartsLibrary #IntegratedCircuit #PowerManagement #MAX77961

Battery Fuel Gauge IC Multi-Chemistry 32-QFN (4x4) The BQ41Z50RSNR is a highly integrated battery fuel gauge and battery management IC designed for single-cell and multi-cell lithium-ion and lithium-polymer battery packs. It provides accurate battery monitoring, protection, authentication, and state estimation functions for portable, industrial, and embedded power applications. The device incorporates advanced Impedance Track™ fuel gauging technology to deliver precise state-of-charge, state-of-health, and runtime predictions across varying operating conditions and battery aging profiles. The device integrates battery protection features including overvoltage, undervoltage, overcurrent, short-circuit, and temperature monitoring to enhance system safety and reliability. It supports SMBus and I²C communication interfaces for host processor interaction and system diagnostics. Internal flash memory allows programmable configuration parameters, calibration data, and battery profile storage. The BQ41Z50RSNR is optimized for compact battery-powered systems requiring accurate fuel gauging, low power consumption, and robust battery protection capabilities. Typical applications include notebooks, handheld devices, industrial instruments, portable medical equipment, smart battery packs, and embedded rechargeable systems. Engineering Specification Device Type Battery Fuel Gauge and Battery Management IC Battery Chemistry Support Lithium-Ion and Lithium-Polymer Cell Configuration Supports multi-cell battery pack configurations Fuel Gauging Technology Impedance Track™ battery fuel gauging Integrated Functions Battery monitoring State-of-charge estimation State-of-health estimation Remaining runtime prediction Battery protection Cell balancing support Authentication support Temperature monitoring Data logging and diagnostics Protection Features Overvoltage protection Undervoltage protection Overcurrent protection Short-circuit protection Charge and discharge protection Thermal protection Communication Interface SMBus compatible I²C compatible interface Non-Volatile Memory Integrated flash memory for configuration and battery profile storage Measurement Functions Battery voltage measurement Current measurement Temperature sensing Capacity tracking Cycle count monitoring Operating Voltage Designed for rechargeable battery pack applications Power Consumption Low-power operation optimized for portable devices Package Type QFN package Mounting Type Surface-mount device Operating Temperature Range Industrial operating temperature range suitable for portable and embedded applications Typical Applications Smart battery packs Portable electronics Industrial handheld equipment Medical portable devices Rechargeable embedded systems Battery-powered instrumentation #commonpartslibrary #integratedcircuit #powermanagement

Accelerometer X, Y, Z Axis ±2g, 4g, 8g 6.25Hz ~ 200Hz 12-LGA (2.2x2.3) The ADXL367BCCZ-RL7 is an ultra-low power, three-axis MEMS accelerometer developed by Analog Devices for motion sensing applications requiring extremely low energy consumption and high measurement stability. The device integrates precision acceleration sensing, embedded motion detection capabilities, and intelligent power management features within a compact surface-mount package suitable for portable and battery-operated systems. The accelerometer supports both I²C and SPI digital communication interfaces, enabling flexible integration with embedded processors, microcontrollers, and sensor hubs. Its architecture is optimized for continuous motion monitoring while maintaining exceptionally low current consumption, making it ideal for wearable electronics, asset tracking devices, medical monitoring equipment, industrial sensing systems, and Internet of Things platforms. The device incorporates embedded activity, inactivity, and wake-up detection functions that allow host processors to remain in low-power states until significant motion events occur. Integrated FIFO buffering and programmable interrupt functionality reduce processor overhead and improve overall system efficiency. The ADXL367BCCZ-RL7 is designed for robust operation across a wide operating temperature range and maintains high measurement accuracy with low noise and excellent long-term stability. The compact LGA package enables dense PCB layouts for space-constrained designs. Key Features Motion Sensing Three-axis digital accelerometer Selectable acceleration measurement ranges High-resolution motion detection Low noise sensing architecture Integrated temperature sensor Power Management Ultra-low power operation optimized for battery-powered systems Multiple operating and standby modes Autonomous motion-triggered wake-up capability Efficient duty-cycling support Digital Interfaces Supports SPI communication Supports I²C communication Programmable interrupt outputs Embedded FIFO data buffering Embedded Detection Functions Activity detection Inactivity detection Motion-triggered interrupt generation Autonomous wake-up monitoring Mechanical and Environmental Compact LGA surface-mount package High shock tolerance Wide operating temperature capability Suitable for portable and industrial environments Electrical Characteristics Supply Requirements Low-voltage digital supply operation Optimized for low-current embedded systems Stable operation across supported voltage range Sensor Performance High sensitivity stability Low offset drift Low output noise density Configurable output data rates Communication and Control Supported Interfaces SPI serial interface I²C serial interface Programmability Configurable measurement ranges Adjustable output data rates Programmable interrupt mapping FIFO configuration support Package Information Package Type LGA surface-mount package Mounting PCB surface mount compatible Suitable for automated assembly processes Typical Applications Wearable electronics Health and fitness monitoring Portable instrumentation Asset and condition monitoring Industrial sensing systems IoT sensor nodes Motion-activated devices Battery-powered embedded systems #commonpartslibrary #integratedcircuit #accelerometer #sensor

Processor PMIC 32-VQFN (5x5) #CommonPartsLibrary #IntegratedCircuit #Power-Management #PMIC

SigmaDSP 28-/56-Bit Audio Processor with Two ADCs and Four DACs #CommonPartsLibrary #IntegratedCircuit #Embedded #DSP #ADAU1401

QFN-68-EP(7x7) Power Management - Specialized RoHS The RK809-5 is a highly integrated Power Management Integrated Circuit (PMIC) from Rockchip designed for multi-core processor systems and embedded applications. It provides a complete power management solution by integrating multiple high-efficiency DC-DC buck converters, LDO regulators, power sequencing logic, battery fuel gauging, RTC functionality, and audio codec capabilities into a single device. The RK809-5 is commonly used alongside Rockchip SoCs in single-board computers, tablets, AIoT devices, and industrial embedded systems. Key Features Five high-efficiency synchronous buck converters with fast transient response. Nine low-dropout (LDO) voltage regulators for powering sensitive analog and digital circuits. Integrated battery fuel gauge for battery capacity monitoring. Configurable power-up and power-down sequencing (OTP programmable). Dynamic Voltage Scaling (DVS/DVFS) support via I²C interface. Integrated Real-Time Clock (RTC) with 32.768 kHz crystal oscillator support. Two integrated load switches for peripheral power control. Over-current, over-voltage, and thermal protection features. Built-in audio CODEC with headphone driver and Class-D amplifier support. Designed to minimize external component count and simplify power system design. QFN-68-EP (7 mm × 7 mm) package. #RK8095 #RK809 #Rockchip #PMIC #PowerManagementIC #BatteryManagement #AudioCodec #RTC #DVFS #EmbeddedSystems #SingleBoardComputer #IoT #IndustrialElectronics #PowerSupplyDesign #ElectronicsEngineering

The power of Raspberry Pi 4 in a compact form factor for deeply embedded applications. Raspberry Pi Compute Module 4 incorporates a quad-core ARM Cortex-A72 processor, dual video output, and a wide selection of other interfaces. Available in 32 variants, with a range of RAM and eMMC Flash options, and with or without wireless connectivity. raspberry pi4 #rpi #pi

Power Management Specialized - PMIC Automotive 2.8-V to 5.5-V PMIC The TPS6593C3A0RWERQ1 is an automotive-grade power management integrated circuit (PMIC) designed by Texas Instruments for advanced processor and system-on-chip power architectures. The device integrates multiple high-efficiency DC/DC buck converters, low-dropout regulators, power sequencing, safety monitoring, and diagnostic functions into a single compact package. It is optimized for use in automotive ADAS, digital cockpit, gateway, radar, vision, and domain controller applications requiring functional safety compliance and high power density. The device supports complex multi-rail power management for high-performance processors and includes configurable startup and shutdown sequencing, voltage monitoring, watchdog functionality, error signaling, and fault protection mechanisms. Integrated communication interfaces enable configuration and monitoring by an external host processor. The PMIC is qualified for automotive applications and supports operation across extended temperature ranges suitable for harsh automotive environments. Key Features Automotive AEC-Q100 qualified power management IC for processor power systems Integrated multi-phase step-down buck converters for high-current rails Integrated low-dropout linear regulators for analog and auxiliary rails Programmable power sequencing and rail management Functional safety support suitable for ASIL-oriented system architectures Integrated watchdog timer and safety monitoring functions Voltage supervision and fault detection for all major rails I2C and SPI communication interface support Power-good outputs and interrupt signaling Thermal shutdown and overtemperature protection Overcurrent and short-circuit protection Undervoltage and overvoltage monitoring Configurable GPIO functionality Low-power standby and sleep mode support Optimized for automotive SoCs and processors High-efficiency switching regulator architecture Compact VQFN package with thermal enhancement Electrical Characteristics Input supply voltage range supports automotive battery-powered systems Multiple programmable buck converter output voltages Integrated LDO outputs for precision analog and digital domains High switching frequency operation for reduced external component size Wide operating junction temperature range suitable for automotive environments Low shutdown current for standby operation High-current capability for processor core supplies Accurate voltage regulation and monitoring Protection and Safety Features Thermal shutdown protection Buck converter cycle-by-cycle current limiting Short-circuit protection on power rails Undervoltage lockout protection Power sequencing fault management Watchdog monitoring for processor supervision Diagnostic interrupt and fault reporting capability Safe-state transition support during fault conditions Package Information Package type: VQFN Package option: RWE Automotive-grade Q1 qualified device RoHS compliant Surface-mount package optimized for thermal performance Typical Applications Automotive domain controllers ADAS processing modules Digital cockpit systems Automotive gateway and networking platforms Radar and vision systems Processor and FPGA power management Industrial high-performance embedded systems #commonpartslibrary #integratedcircuit #powermanagement

Audio Digital Signal Processor (DSP) 150MHz 61-WLCSP (2.7x4.12) #CommonPartsLibrary #IntegratedCircuit #DSP #CS47L63

Accelerometer X, Y, Z Axis ±400g 160Hz ~ 2.56kHz 16-LGA (3x3.25) The ADXL373BCCZ-RL7 is an ultralow power, high-g digital MEMS accelerometer developed by Analog Devices for motion sensing and impact detection applications. The device is optimized for battery-powered and always-on systems requiring continuous acceleration monitoring with minimal power consumption. It supports selectable measurement ranges suitable for shock, vibration, and activity monitoring in industrial, wearable, medical, asset tracking, and IoT applications. The accelerometer integrates embedded motion detection features, a FIFO buffer, and interrupt capabilities to reduce host processor workload and overall system power consumption. Engineering Specification Device Type Ultralow power 3-axis digital MEMS accelerometer Manufacturer Analog Devices Inc. Manufacturer Part Number ADXL373BCCZ-RL7 Measurement Axes Three-axis acceleration sensing Acceleration Range Selectable full-scale ranges supporting high-g measurements up to ±400 g Output Interface SPI digital serial communication interface Resolution High-resolution digital acceleration output with integrated filtering and signal conditioning Power Supply Requirement Operates from a low-voltage DC supply suitable for portable and embedded systems Power Consumption Designed for extremely low current operation during measurement and wake-up monitoring modes Embedded Features Integrated activity detection Motion and impact sensing FIFO data buffering Interrupt generation Wake-up detection functionality Sampling and Performance Programmable output data rates and filtering options for optimized noise and bandwidth performance Operating Temperature Range Industrial temperature range suitable for harsh environmental applications Package Type LGA surface-mount package Mounting Style Surface mount technology Application Areas Impact event recording Condition monitoring Asset tracking Industrial sensing Wearable electronics Portable instrumentation Shock and vibration monitoring Always-on motion detection systems #commonpartslibrary #integratedcircuit #accelerometer #sensor

Audio Audio Signal Processor 3 Channel 38-TSSOP #commonpartslibrary #integratedcircuit #audio #signal

Compute Module 5 is a powerful and scalable system on module with a 64-bit Arm processor @ 2.4GHz, an I/O controller, video and PCIe interfaces, and a range of wireless, SDRAM and eMMC options. raspberry pi5 #rpi #pi

Arduino Nano Every is an evolution of the traditional Arduino Nano board but features a lot more powerful processor, the ATmega4809 20MHz 8-Bit AVR 6KB SRAM 256Bytes EEPROM

ESP32-WROOM32 ESP32 802.11 b/g/n (WiFi/WLAN/Wi-Fi 4), Bluetooth® Smart 4.x Low Energy (BLE) Transceiver 2.4GHz Evaluation Board ESP32-POE is an ESP32-based IoT development board that combines Wi-Fi, Bluetooth, Ethernet connectivity, and Power over Ethernet (PoE) in a single platform. It is designed for industrial automation, smart home systems, remote monitoring, and other network-connected embedded applications where both power and data can be delivered through a single Ethernet cable. The board supports the ESP32 dual-core processor and provides expansion interfaces for sensors, storage, and peripherals. FEATURES • ESP32-WROOM-32 WiFi/BLE module • Ethernet 100Mb interface with IEEE 802.3 PoE support • LiPo battery charger • LiPo battery connector • UEXT connector • User button • Reset button • Micro USB with programmer for ESP32 programming • MicroSD card • Two extension connectors 0.1" step spaced at 1" • PCB dimensions: (75 x 28)mm ~ (3 x 1)" #ESP32 #ESP32POE #IoT #Ethernet #PoE #WiFi #Bluetooth #EmbeddedSystems #IndustrialIoT #SmartHome #OpenSourceHardware #Microcontroller #EdgeComputing #Automation #MakerProjects

USB Type-C port controller, Cortex®-M0 processor, DFP CC with opto coupler feedback bootloader, SOIC-16 USBPD quickcharge SOIC*3.9x9.9mm*P1.27mm*

SigmaDSP Digital Audio Processor #DSP #audio

The ESP32-S3-DEVKITC-1U-N8R8 from Espressif Systems is an evaluation board designed for wireless communication applications. It features a 32-bit Xtensa dual-core processor running at 240MHz, providing strong processing power for complex tasks. The board supports 802.11 b/g/n Wi-Fi and Bluetooth® 5.x (BLE), operating at 2.4GHz, ensuring seamless wireless communication. 8 MB Quad flash and 8MB Octal PSRAM,

CMOS with Processor Image Sensor 1920H x 1080V 1.4µm x 1.4µm 34-CSP5 (3.85x2.92)

32 TOPS vision SoC for 1-12 cameras, autonomous mobile robots, machine vision, mobile DVR, AI-BOX #Integrated-circuit #processor #Microcontroller #AM69A

System On Chip (SOC) IC It integrates multiple processing units including CPUs, DSPs, AI accelerators, and GPU into a single chip to handle vision processing, deep learning, sensor fusion, and real-time control in automotive and industrial systems. • C7x floating point, vector DSP, up to 1.0GHz, 80 GFLOPS, 256 GOPS • Deep-learning matrix multiply accelerator (MMA), up to 8 TOPS (8b) at 1.0GHz • Vision Processing Accelerators (VPAC) with Image Signal Processor (ISP) and multiple vision assist accelerators • Depth and Motion Processing Accelerators (DMPAC) • Dual 64-bit Arm® Cortex®-A72 microprocessor subsystem at up to 2.0GHz – 1MB shared L2 cache per dual-core Cortex®- A72 cluster – 32KB L1 DCache and 48KB L1 ICache per Cortex®-A72 core • Six Arm® Cortex®-R5F MCUs at up to 1.0GHz – 16K I-Cache, 16K D-Cache, 64K L2 TCM – Two Arm® Cortex®-R5F MCUs in isolated MCU subsystem – Four Arm® Cortex®-R5F MCUs in general compute partition • Two C66x floating point DSP, up to 1.35GHz, 40GFLOPS, 160GOPS • 3D GPU PowerVR® Rogue 8XE GE8430, up to 750MHz, 96GFLOPS, 6Gpix/sec • Custom-designed interconnect fabric supporting near max processing entitlement Memory subsystem: • Up to 8MB of on-chip L3 RAM with ECC and coherency – ECC error protection – Shared coherent cache – Supports internal DMA engine • External Memory Interface (EMIF) module with ECC – Supports LPDDR4 memory types – Supports speeds up to 4266MT/s – 32-bit data bus with inline ECC • General-Purpose Memory Controller (GPMC) • 512KB on-chip SRAM in MAIN domain, protected by ECC #CommonPartsLibrary #IntegratedCircuit

The Syntiant NDP120 Neural Decision Processor is a special purpose chip for audio and sensor processing for always-on applications in battery powered devices and other power constrained systems. The NDP120 applies neural processing to run multiple applications simultaneously with minimal power consumption. Built using the Syntiant Core 2 programmable deep learning architecture, NDP120 is designed to natively run multiple Deep Neural Networks (DNN) on a variety of architectures, such as CNN, RNN and fully connected networks. NDP120 brings a level of ML performance that delivers 25x the tensor throughput compared to the Syntiant Core 1 embedded in Syntiant’s NDP100 and NDP101 devices. A programmable HiFi 3 DSP is available for classical audio processing. Always-On Speech & Sensor-Fusion Processor

IC RF TxRx + MCU 802.15.4, Bluetooth Bluetooth v5.0, Thread, Zigbee® 2.4GHz 48-VFQFN Exposed Pad The NRF52840-QFAA-F-R belongs to Nordic’s nRF52 series and supports multiple wireless standards including Bluetooth 5, Bluetooth Low Energy (BLE), Thread, Zigbee, ANT, and proprietary 2.4 GHz protocols. It features a 64 MHz ARM Cortex-M4F CPU with floating-point unit (FPU), making it suitable for both wireless communication and real-time embedded processing. The device integrates large memory resources, rich peripherals, USB support, NFC capability, and advanced security features, reducing the need for external components in wireless embedded designs. Key Features 32-bit ARM Cortex-M4F processor running at 64 MHz 1 MB Flash memory and 256 KB RAM Supports Bluetooth 5 / BLE, Thread, Zigbee, ANT, and proprietary 2.4 GHz protocols IEEE 802.15.4 compliant radio Up to +8 dBm TX output power High receiver sensitivity down to −103 dBm Data rates up to 2 Mbps Ultra-low power consumption for battery-powered applications USB 2.0 Full-Speed controller NFC-A tag support Multiple communication interfaces: SPI UART I2C (TWI) I2S PWM PDM ADC Up to 48 GPIOs Integrated ARM CryptoCell-310 security engine Operating voltage range: 1.7 V to 5.5 V Operating temperature: −40°C to +85°C Compact 48-QFN (6×6 mm) package Typical Applications BLE devices Smart home products Wearables Wireless sensors Industrial IoT HID devices (keyboard/mouse) Asset tracking Mesh networking devices USB dongles and gateways PCB Design Notes Community PCB reviews commonly recommend: Proper RF grounding and 50-ohm antenna routing Using ESD/TVS protection on USB lines Keeping RF matching components close to the antenna Using solid ground planes for 2.4 GHz performance #CommonPartsLibrary #IntegratedCircuit #RF