Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain this part
Write a part description
Describe each pin
Operating conditions
Electrical max ratings
Part Specifications
Application circuits
Verify Part Details
Recommend similar parts
Check availability & lifecycle
could you add ethernet to rpi cm4?
limtbk

limtbk

@copilot could you add ethernet to rpi cm4?
2y

copilot

To add Ethernet to the Raspberry Pi CM4, you will need to properly connect the Ethernet signals between the CM4 and an appropriate Ethernet PHY. The CM4 provides signals typically required for Ethernet connectivity, such as TX, RX, and control signals.
Based on the project components provided, let's connect the relevant Ethernet pins to a standard Ethernet PHY (e.g., Microchip's LAN9514 or Broadcom BCM54213). Here are the steps and connections you need to make:
Steps to Add Ethernet
  1. Choose an Ethernet PHY: Select an Ethernet PHY chipset that supports the required speed (10/100/1000 Mbps) and has the necessary interface.
  2. Make Connections: Connect the appropriate signals between the CM4 and the Ethernet PHY.
Typical Connections
Assuming you're using a typical Ethernet PHY, here are the connections:
Ethernet Tx/Rx Differential Pairs
  • Transmit Pair 0:
    • Connect CM4:ETHERNET_PAIR0_P (Pin 12) to PHY:TXP0.
    • Connect CM4:ETHERNET_PAIR0_N (Pin 10) to PHY:TXN0.
  • Receive Pair 0:
    • Connect CM4:ETHERNET_PAIR1_P (Pin 4) to PHY:RXP0.
    • Connect CM4:ETHERNET_PAIR1_N (Pin 6) to PHY:RXN0.
  • Transmit Pair 1:
    • Connect CM4:ETHERNET_PAIR2_P (Pin 11) to PHY:TXP1.
    • Connect CM4:ETHERNET_PAIR2_N (Pin 9) to PHY:TXN1.
  • Receive Pair 1:
    • Connect CM4:ETHERNET_PAIR3_P (Pin 3) to PHY:RXP1.
    • Connect CM4:ETHERNET_PAIR3_N (Pin 5) to PHY:RXN1.
Control and Miscellaneous Signals
  • LED Signals:
    • Connect CM4:ETHERNET_~LED1 to PHY:LED1.
    • Connect CM4:ETHERNET_~LED2 to PHY:LED2.
    • Connect CM4:ETHERNET_~LED3 to PHY:LED3.
  • Clock and Sync Signals:
    • Connect CM4:ETHERNET_SYNC_IN to PHY:SYNC_IN.
    • Connect CM4:ETHERNET_SYNC_OUT to PHY:SYNC_OUT.
Power and Ground
  • Power Pins:
    • Ensure your Ethernet PHY is powered appropriately, typically needing a 3.3V or 1.8V power supply.
    • You can derive this from the CM4_3.3V(OUTPUT) or CM4_1.8V(OUTPUT) pins if your PHY supports these voltages.
  • Ground Pins:
    • Connect CM4:GND__# to the ground pins of the Ethernet PHY.
Example Connection List
  • Connect CM4:ETHERNET_PAIR0_P to PHY:TXP0.
  • Connect CM4:ETHERNET_PAIR0_N to PHY:TXN0.
  • Connect CM4:ETHERNET_PAIR1_P to PHY:RXP0.
  • Connect CM4:ETHERNET_PAIR1_N to PHY:RXN0.
  • Connect CM4:ETHERNET_PAIR2_P to PHY:TXP1.
  • Connect CM4:ETHERNET_PAIR2_N to PHY:TXN1.
  • Connect CM4:ETHERNET_PAIR3_P to PHY:RXP1.
  • Connect CM4:ETHERNET_PAIR3_N to PHY:RXN1.
  • Connect CM4:ETHERNET_~LED1 to PHY:LED1.
  • Connect CM4:ETHERNET_~LED2 to PHY:LED2.
  • Connect CM4:ETHERNET_~LED3 to PHY:LED3.
  • Connect CM4:ETHERNET_SYNC_IN to PHY:SYNC_IN.
  • Connect CM4:ETHERNET_SYNC_OUT to PHY:SYNC_OUT.
  • Connect CM4:GND__# to PHY:GND.
  • Connect CM4_3.3V(OUTPUT) to PHY:VDD33.
Make sure to refer to the datasheet of the specific Ethernet PHY you are using for pin names and additional required connections (such as MDIO/MDC for management if needed).
Feel free to correct any assumptions or provide more details about the Ethernet PHY you plan to use so I can give you more specific instructions!
2y
limtbk

limtbk

How to connect VL806 to this module to have 4 USB3?
2y

copilot

To connect the VL806 USB3.0 hub controller to the Raspberry Pi Compute Module 4 (CM4) to provide four USB 3.0 ports, you need to correctly wire the High-Speed Differential Pairs and control signals between the CM4 and the VL806 controller, and also ensure proper power supply connections.
USB 3.0 Overview
USB 3.0 adds SuperSpeed (SS) signals to the USB 2.0 interface, so each USB 3.0 connection requires additional differential pairs for the SS data lines.
Assumptions
  • You have a VL806 USB 3.0 hub controller.
  • You want to connect it to the CM4 to provide four USB 3.0 ports.
Necessary Connections High-Speed Differential Pairs (SuperSpeed TX/RX)
  • USB_SS_TX/RX:
    • Connect CM4:USB_OTG_ID to VL806:OTG (if needed for OTG pin).
    • Connect CM4:USB_P to VL806:USB3_SS_RX_P.
    • Connect CM4:USB_N to VL806:USB3_SS_RX_N.
    • Connect VL806:USB3_SS_TX_P to the USB3 SS TX pair.
    • Connect VL806:USB3_SS_TX_N to the USB3 SS TX pair.
Control Signals
  • Power Enable:
    • If VL806 has a power enable pin, connect it to a GPIO pin on the CM4 for control.
  • Reset:
    • Connect VL806:RESET# to the CM4:RUN_PG pin or another GPIO capable of controlling reset.
  • Clock:
    • Connect a reference clock (usually 25 MHz or 48 MHz) to the VL806 as specified in its datasheet.
USB2.0 Data Lines
  • USB_DP/DM:
    • Connect CM4:USB_P to VL806:USB2_DP.
    • Connect CM4:USB_N to VL806:USB2_DM.
Power and Ground
  • Power Supply:
    • Ensure the VL806 is powered correctly according to its voltage requirements (usually 3.3V or 1.8V).
    • You can supply 3.3V from the CM4_3.3V(OUTPUT) pin or use an external power supply.
  • Ground Connections:
    • Connect all ground pins on the VL806 to CM4:GND to ensure a common ground.
Example Connection List
  • Connect CM4:USB_OTG_ID to VL806:OTG (if required).
  • Connect CM4:USB_P to VL806:USB3_SS_RX_P.
  • Connect CM4:USB_N to VL806:USB3_SS_RX_N.
  • Connect VL806:USB3_SS_TX_P to USB3 port TX_P (external connector TX+).
  • Connect VL806:USB3_SS_TX_N to USB3 port TX_N (external connector TX-).
  • Connect CM4:USB_P to VL806:USB2_DP.
  • Connect CM4:USB_N to VL806:USB2_DM.
  • Connect the VL806 power pins to the CM4_3.3V(OUTPUT) pin.
  • Connect all ground pins (e.g., CM4:GND__#) to the ground pins on the VL806.
  • Optionally, connect VL806:RESET# to CM4:RUN_PG or another GPIO pin for reset control.
Power Considerations
Ensure that the power supply section of the VL806 is properly designed to handle the current requirements of the USB3 ports, especially if all four ports will be active simultaneously.
Clock Input
Check the VL806 datasheet for the correct crystal or clock input specification and ensure the appropriate circuitry is in place to provide this clock.
Verify Connection
It's critical to verify all connections against the specific datasheet of the VL806 and the CM4 IO board schematics. This ensures that signal integrity and power requirements are adequately met.
Feel free to reach out if you need more detailed help with any specific aspect of this setup!
2y
limtbk

limtbk

Add vl806 to schematics
2y

copilot

To add the VL806 USB 3.0 hub controller to the schematic with the necessary connections to the Raspberry Pi Compute Module 4 (CM4), here are the steps and connections provided in a detailed manner. Below is a connection list to guide the additions.
VL806 USB 3.0 Hub Controller Pinout (Assumed)
For this example, let's assume the following relevant pins for the VL806:
  • VL806:USB3_SS_RX_P and VL806:USB3_SS_RX_N are the SuperSpeed receive differential pairs.
  • VL806:USB3_SS_TX_P and VL806:USB3_SS_TX_N are the SuperSpeed transmit differential pairs.
  • VL806:USB2_DP and VL806:USB2_DM are the USB 2.0 data lines.
  • VL806:OTG is an optional OTG pin.
  • VL806:RESET# is the reset pin.
  • VL806:VDD33 is a 3.3V power supply pin.
  • VL806:GND are multiple ground pins.
  • VL806:CLK_IN is the clock input pin (assuming a 25MHz or 48MHz clock).
Example Connection List
  1. USB SuperSpeed Differential Pairs:
    • Connect CM4:USB_P to VL806:USB3_SS_RX_P.
    • Connect CM4:USB_N to VL806:USB3_SS_RX_N.
    • Connect VL806:USB3_SS_TX_P to the SuperSpeed TX pair on your external USB 3.0 connectors.
    • Connect VL806:USB3_SS_TX_N to the SuperSpeed TX pair on your external USB 3.0 connectors.
  2. USB 2.0 Data Lines:
    • Connect CM4:USB_P to VL806:USB2_DP.
    • Connect CM4:USB_N to VL806:USB2_DM.
  3. Optional OTG Pin:
    • Connect CM4:USB_OTG_ID to VL806:OTG (if used for OTG functionality).
  4. Power and Ground:
    • Connect CM4_3.3V(OUTPUT) to VL806:VDD33.
    • Connect CM4:GND_# to VL806:GND.
  5. Control Signals:
    • Connect CM4:RUN_PG (or another GPIO pin) to VL806:RESET#.
  6. Clock Input:
    • Ensure the correct clock input is connected to VL806:CLK_IN. This might involve an external crystal oscillator circuit (e.g., 25MHz or 48MHz).
Adding Components to the Schematics:
  1. Add VL806 Component:
    • In Flux, add a new component for VL806 if it doesn’t already exist in your library.
    • Define the relevant pins as described above (USB3_SS_RX_P, USB3_SS_RX_N, USB3_SS_TX_P, USB3_SS_TX_N, USB2_DP, USB2_DM, OTG, RESET#, VDD33, GND, CLK_IN).
  2. Make Connections:
    • Connect the pins on the CM4 to the corresponding pins on the VL806 as per the connection list.
Example Schematics Connections: 
  • Markdown
    - Connect `P1: USB3_SS_RX_P` to `VL1:USB3_SS_RX_P`
- Connect `P1: USB3_SS_RX_N` to `VL1:USB3_SS_RX_N`
- Connect `VL1:USB3_SS_TX_P` to `USB3 external connector TX_P`
- Connect `VL1:USB3_SS_TX_N` to `USB3 external connector TX_N`
- Connect `P1: USB_P` to `VL1:USB2_DP`
- Connect `P1: USB_N` to `VL1:USB2_DM`
- Connect `P1:USB_OTG_ID` (if used) to `VL1:OTG`
- Connect `CM4_3.3V(OUTPUT)` to `VL1:VDD33`
- Connect `CM4:GND_#` to `VL1:GND`
- Connect `P1:RUN_PG` to `VL1:RESET#`
- Connect `CLK source to VL1:CLK_IN`
Feel free to correct any specifics or provide further details if additional pins or connections are needed for your particular application.
2y
Someone is typing...
6
how do I use Flux?
rhwong

rhwong

@copilot how do I use Flux?
2y

copilot

Flux provides an intuitive interface to design electronic schematics and lay out PCBs. Here's a high-level overview of the key features:
  1. Schematic Design: Flux provides a large library of electronic components you can use in your projects. You can drag these components onto the canvas to start creating your schematic. You can then wire them together according to your designs.
  2. PCB Layout: Once your schematic is complete, you can switch over to the PCB layout mode. Here, you can place the physical representations of your components on your board, and route the electrical connections between them.
  3. Simulation: Flux provides a basic electronic simulation feature. You can use this feature to verify your circuit designs before manufacturing your board.
  4. Manufacturing Exports: Once you are done with your design and have validated it, you can export the necessary files for manufacturing. These include Gerber files, which are accepted by nearly all PCB manufacturers.
  5. Collaboration: Flux allows multiple users to view and edit the same project simultaneously, making it a great tool for team projects.
Here are some more specific resources to help you get started with Flux:
  • If you're new to Flux, consider walking through the tutorials provided in the official documentation [1].
  • Video tutorials and example projects on the official YouTube channel can help you better understand how to use the tool effectively [2].
  • The reference section on the documentation page offers detailed information about the elements of Flux.
  • To ask questions or connect with other Flux users, consider joining their Slack community [3].
If you encounter any specific difficulties or need clarification on any aspects of the software, don't hesitate to ask for help.
[1] https://docs.flux.ai/introduction
[2] https://docs.flux.ai/Introduction/upverter-to-flux
[3] https://docs.flux.ai/Introduction/getting-support
2y
Someone is typing...
4
how much emmc is available
radiostudio

radiostudio

@copilot how much power does it require
2y

copilot

The Raspberry Pi Compute Module 4, at maximum usage, typically consumes around 3 - 5 watts of power. However, the actual power consumption may change based on the utilization of the CPU, RAM, GPU, peripherals and other components.
In terms of the voltage requirements, the Compute Module 4 typically requires two input voltages:
  1. 5V: This is the main supply voltage for the module. It is generally used to power the I/Os and the HDMI interface.
  2. 3.3V: This is used to power the system ICs such as the main processor/RAM, the internal PHYs for the Ethernet and USB, etc.
However, the general recommendation is to closely follow the power requirements specified in the detailed technical datasheets by Raspberry Pi Inc. for the specific variant of the Compute Module 4 that you're using. Please correct me if I made a wrong assumption about your module.
2y
radiostudio

radiostudio

how much power does it require
2y
radiostudio

radiostudio

@copilot how much emmc is available
2y

copilot

I'm sorry for any confusion. Concerning the Raspberry Pi Compute Module 4, it is available in different variations. The eMMC (flash storage) capacity can vary from none (Lite version) to 8GB, 16GB and reaching up to 32GB. I would advise checking the exact specifications of your particular model to determine the exact eMMC capacity.
2y
Someone is typing...
5
explain this project.
redmika1

redmika1

@copilot explain this project.
1y

copilot

This project is a detailed schematic representation of a carrier board for the Raspberry Pi Compute Module 4 (CM4). The Raspberry Pi CM4 is a compact, modular version of the Raspberry Pi 4 that integrates a quad-core ARM Cortex-A72 processor, dual video output, and various interfaces such as PCIe, HDMI, MIPI CSI (camera), MIPI DSI (display), Ethernet, GPIO, etc. Here's a breakdown of what this project includes:
Main Components and Descriptions:
  1. Power Pins:
    • 5V Input:
      • +5V(INPUT): Various pins like Pin 79, 85, and 87 for accepting the main power input.
    • 3.3V Output:
    • Ground (GND):
      • Multiple GND pins spread across the module, for example, GND__46 at Pin 186 as a return path for the current.
  2. PCIe Interface:
  3. SD Card/eMMC Interface:
    • Includes data pins like SD_DAT7 (Pin 70) and control pins like SD_CMD (Pin 62).
  4. Camera Interface (MIPI CSI):
    • Differential pairs such as CAM1_D2_N (Pin 133) and clock signals like CAM1_C_N (Pin 127) for connecting MIPI cameras.
  5. Display Interface (MIPI DSI):
    • Differential pairs for transmission such as DSI0_C_P (Pin 171) for connecting to MIPI displays.
  6. GPIO Pins:
    • General-Purpose Input/Output pins like GPIO8 (Pin 39) for various peripheral connections and custom use.
  7. Ethernet Interface:
  8. HDMI Interface:
    • Includes differential pairs like HDMI1_TX1_P (Pin 152) for display connection via HDMI.
  9. USB Interface:
    • USB connections including data lines like USB_OTG_ID (Pin 101).
  10. Other Interfaces:
    • Connections for I2C, SPI, and other communication interfaces represented by pins like SCL0 (Pin 80) for I2C clock.
Overall Design
  • Power Distribution:
    • The project includes multiple power-in and ground pins to ensure stable and reliable power distribution across all modules and components.
  • High-Speed Interfaces:
    • Controlled impedance pairs for high-speed data transmission in interfaces such as HDMI, Ethernet, PCIe, and USB are noted with their tolerances, pin delays, and skew values.
  • Multiple Connectivity Options:
    • Various I/O and communication pin types (bidi, input, output, and passive) enabling a flexible and highly capable embedded system design.
  • Compliance with Design Standards:
    • The project also considers controlled impedance requirements and tolerances, important for maintaining signal integrity in high-frequency applications.
This schematic is ready to be used as a basis to create a Printed Circuit Board (PCB) layout where physical connections for these various interfaces will be routed, and components will be placed appropriately to build a fully functional carrier board for Raspberry Pi CM4.
If you need further details or clarifications on specific parts or want to proceed with certain connections, let me know!
1y
Someone is typing...
7
responsabilidad social empresarial
brayanp5625

brayanp5625

@copilot responsabilidad social empresarial
2y

copilot

Como asistente de IA especializado en diseño eléctrico y esquemas de PCB, no estoy diseñado para proporcionar una gran cantidad de detalles sobre la responsabilidad social empresarial (RSE). Sin embargo, puedo decirte que la RSE se refiere a las prácticas empresariales que tienen en cuenta el impacto social y ambiental de la empresa. Esto podría abordarse en el desarrollo de hardware electrónico y PCB asegurándose de que los componentes utilizados son sostenibles, los procesos de fabricación son éticos y se minimiza el desperdicio, entre otras consideraciones. Por favor, consulta a un experto en negocios o ética para obtener una descripción más detallada y un asesoramiento más específico.
2y
Someone is typing...
3
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    16.5k
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M
  • 1070TR
    1070TR
    Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
    jharwinbarrozo
    700.5k

Raspberry Pi Compute Module 4

Raspberry Pi Compute Module 4 thumbnail
The power of Raspberry Pi 4 in a compact form factor for deeply embedded applications. Raspberry Pi Compute Module 4 incorporates a quad-core ARM Cortex-A72 processor, dual video output, and a wide selection of other interfaces. Available in 32 variants, with a range of RAM and eMMC Flash options, and with or without wireless connectivity.
raspberry pi4 #rpi #pi

Properties

Integrated Circuit

Raspberry Pi Compute 4

Raspberry Pi Inc

datasheets.raspberrypi.com/cm4/cm4-datasheet.pdf

creativecommons.org/licenses/by/4.0/

U

Parametric

Pricing & Availability

Distributor

Qty 1

Controls