Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template #manufacturer-design-rules

Welcome to your new project. Imagine what you can build here.

This project was intended for the spirit of Halloween, This circuit functions are meant to detect the movement of an object holding candies. If the sensor detect that anyone moves the object, it will send the data from the sensor to the microcontroller. Lastly, once the microcontroller receives the data, it will send it to the buzzer to output a buzz that will stimulate a shock.

makes a circuit which has transistors, diodes, relays, IC Timer, LED, which first turns on a green LED lit from 0 to 35 degrees Celsius then turns off and turns on a yellow LED from 35 degrees Celsius to 50 degrees Celsius then turns off the yellow and turns on the red at 50 degrees or more which in turn will turn on an oscillator circuit with IC555 and a Buzzer. In addition it should turn on an exhaust fan at 110 VAC. Translated with DeepL.com (free version)

This module involves the design of a keypad lock system. It utilizes an ATMEGA328P microcontroller, buzzers, LEDs for indicator functions and a 4x3 matrix keypad. An in-circuit serial programming (ISP) header is also present for programming the microcontroller. #template #lock #keypad #reusable #module #simple-embedded #microchip #arduino #atmega328 #TPS613222A #ISP #buzzer #sublayout

This document provides a detailed guide to building a relay circuit that uses a Raspberry Pi to control a buzzer. The relay acts as a switch, allowing the Raspberry Pi to turn the buzzer ON and OFF through GPIO pins.

This is a schematic of an IR (infrared) remote control system. It's built around a Microchip ATTINY2313 microcontroller (U1) and boasts five push-button switches, an indicator RED LED and an electret buzzer for user interaction. An ISP header provides programming capabilities. The project is battery-powered and implements boost converter TPS613222AD (IC1) for stable power supply. #project #Template #projectTemplate #lock #keypad #attiny2313 #TPS613222A #ISP #buzzer #reusable #module #simple-embedded #microchip #arduino #sublayout

This is a Garage Security System Reference Design, employing a Photon microcontroller to process sensor triggers, signaling through a buzzer and LEDs, powered by an HLK-PM03 power supply. #referenceDesign #edge-computing #edgeComputing #particle #template #iot #system #security

This is a schematic of an IR (infrared) remote control system. It's built around a Microchip ATTINY2313 microcontroller (U1) and boasts five push-button switches, an indicator RED LED and an electret buzzer for user interaction. An ISP header provides programming capabilities. The project is battery-powered and implements boost converter TPS613222AD (IC1) for stable power supply. #project #Template #projectTemplate #lock #keypad #arduino #attiny2313 #TPS613222A #ISP #buzzer #referenceDesign #simple-embedded #microchip #template #reference-design

Smart Haptic Buzzer Powered by STM32F03.

This is a reference design WiFi remote control utilizing an ESP32-PICO. It includes a battery circuit, a buzzer, and multiple control buttons for inputs. #referenceDesign #simple-embedded #espressif #project #button #esp #template #reference-design

Raspberry Pi 5 HAT for the Tense Sapphire P.K.E. Meter with two GPIO-driven LEDs, one buzzer, and two GPIO buttons on the 40-pin HAT interface.

Wearable closed-loop ultrasonic monitoring and transcutaneous neuromodulation system based on ESP32-C3, powered from a 7.4 V 1000 mAh LiPo battery with TP4056 charging, MT3608 boost conversion, AMS1117-3.3 regulation, JSN-SR04T ultrasonic sensing, LED and buzzer alerts through a BC547 driver, and a reserved neuromodulation interface for future integration.

MagicGlow smart key tray annular PCB with dual WS2812B rings, ESP32-C6 control, HX711 load-cell interface, USB-C power/UART access, buzzer, and button.

The DRV2605 from TI is a fancy little motor driver. Rather than controlling a stepper motor or DC motor, its designed specifically for controlling haptic motors - buzzers and vibration motors. Normally one would just turn those kinds of motors on and off, but this driver has the ability to have various effects when driving a vibe motor. For example, ramping the vibration level up and down, 'click' effects, different buzzer levels, or even having the vibration follow a musical/audio input.

The DRV2605 from TI is a fancy little motor driver. Rather than controlling a stepper motor or DC motor, its designed specifically for controlling haptic motors - buzzers and vibration motors. Normally one would just turn those kinds of motors on and off, but this driver has the ability to have various effects when driving a vibe motor. For example, ramping the vibration level up and down, 'click' effects, different buzzer levels, or even having the vibration follow a musical/audio input.

This module involves the design of a keypad lock system. It utilizes an ATMEGA328P microcontroller, buzzers, LEDs for indicator functions and a 4x3 matrix keypad. An in-circuit serial programming (ISP) header is also present for programming the microcontroller. #template #lock #keypad #reusable #module #simple-embedded #microchip #arduino #atmega328 #TPS613222A #ISP #buzzer #sublayout

This module involves the design of a keypad lock system. It utilizes an ATMEGA328P microcontroller, buzzers, LEDs for indicator functions and a 4x3 matrix keypad. An in-circuit serial programming (ISP) header is also present for programming the microcontroller. #template #lock #keypad #reusable #module #simple-embedded #microchip #arduino #atmega328 #TPS613222A #ISP #buzzer #sublayout

This module involves the design of a keypad lock system. It utilizes an ATMEGA328P microcontroller, buzzers, LEDs for indicator functions and a 4x3 matrix keypad. An in-circuit serial programming (ISP) header is also present for programming the microcontroller. #template #lock #keypad #reusable #module #simple-embedded #microchip #arduino #atmega328 #TPS613222A #ISP #buzzer #sublayout

This is a schematic of an IR (infrared) remote control system. It's built around a Microchip ATTINY2313 microcontroller (U1) and boasts five push-button switches, an indicator RED LED and an electret buzzer for user interaction. An ISP header provides programming capabilities. The project is battery-powered and implements boost converter TPS613222AD (IC1) for stable power supply. #project #Template #projectTemplate #lock #keypad #attiny2313 #TPS613222A #ISP #buzzer #reusable #module #simple-embedded #microchip #arduino #sublayout

1.1 BLE Beacon Tags – Dual-Mode (BLE + LoRa) Installation: Mounted on safety helmets. Specification Requirement Communication Protocols BLE 5.0+ and LoRaWAN 1.0.4 Class A/B BLE Range Up to 150 meters LoRa Range > 5 km Battery Life BLE: ≥ 5 years; LoRa: ≥ 8 years Indoor Accuracy 1–5 meters using BLE Outdoor Accuracy 1–10 meters using LoRa + IMU + AI (no GPS on tag) Sensors 3-axis IMU, optional T&H, fall detection Alert Features SOS button, red LED, buzzer, vibration motor IP Rating IP67 minimum Operating Temperature -20°C to +70°C Certifications IECEx, IPSEC, FCC, CE, RoHS, REACH Branding White label with client logo

This module involves the design of a keypad lock system. It utilizes an ATMEGA328P microcontroller, buzzers, LEDs for indicator functions and a 4x3 matrix keypad. An in-circuit serial programming (ISP) header is also present for programming the microcontroller. #template #lock #keypad #reusable #module #simple-embedded #microchip #arduino #atmega328 #TPS613222A #ISP #buzzer #sublayout