Fixing Airwire Routing Error
The "Airwires" review flagged a error on BZ1:+, R3:P1.
Reports missing routed traces between pads in a net.
Designators: BZ1:+, R3:P1; Net: 9V
Context: Reports missing routed traces between pads in a net.
Help me fix this.
Thought for 22 sec
I’ll fix the 9V airwire between BZ1:+ and R3:P1 by checking current DRC/layout state, cleaning any stale dangling traces if present, then routing and re-running the airwires review.
Worked for 24 sec
The board has enough routing space, and there were no dangling-trace errors reported. I found 11 airwires total, so I’m running the router to connect the remaining unrouted pads, including the 9V BZ1:+ to R3:P1 connection.
Worked for 3 mins 5 sec
Fixed. I routed the remaining unrouted pads, including the 9V connection between BZ1:+ and R3:P1.
Validation passed: the Airwires check is now clear, and the final project review reports no unresolved ERROR/WARNING/OPEN issues.
Recheck design
Check 9V trace
Locate 9V trace
Export Gerbers
