• Micro HAT RPI template b24c

    Micro HAT RPI template b24c

    This Micro HAT RPI template you can use in your project for fast developing #template #project #RPI

    yousi176

    yousi176

    1 Comment

  • Micro HAT RPI template

    Micro HAT RPI template

    This Micro HAT RPI template you can use in your project for fast developing #template #project #RPI

    razusarder

    razusarder

    1 Comment

  • Micro USB Motor Controller

    Micro USB Motor Controller

    The Micro USB Motor Controller is a compact and versatile solution for controlling motors via USB. #MotorController #USBControl #CompactDesign

    vasyl

    vasyl

    1 Comment

  • Micro HAT RPI template

    Micro HAT RPI template

    This Micro HAT RPI template you can use in your project for fast developing #template #project #RPI

    ogntech

    ogntech

  • Arduino Micro Template

    Arduino Micro Template

    Template for ATmega32U4 Arduino Micro AVR® ATmega AVR MCU 8-Bit Embedded Evaluation Board #project-template #template #arduino #micro

    rafaeler

    rafaeler

  • Arduino Micro Template gvvJ

    Arduino Micro Template gvvJ

    Template for ATmega32U4 Arduino Micro AVR® ATmega AVR MCU 8-Bit Embedded Evaluation Board #project-template #template #arduino #micro

    gokmenim

    gokmenim

  • Arduino Micro Template

    Arduino Micro Template

    Template for ATmega32U4 Arduino Micro AVR® ATmega AVR MCU 8-Bit Embedded Evaluation Board #project-template #template #arduino #micro

    gokmenim

    gokmenim

  • Arduino Pro Micro vcvi

    Arduino Pro Micro vcvi

    The Micro is a microcontroller board based on the ATmega32U4 (datasheet), developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard. The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.

    rzae

    rzae

  • Micro HAT RPI template

    Micro HAT RPI template

    This Micro HAT RPI template you can use in your project for fast developing #template #project #RPI

    yousi176

    yousi176

  • Micro HAT RPI template

    Micro HAT RPI template

    This Micro HAT RPI template you can use in your project for fast developing #template #project #RPI

    dark6614

  • Micro nRF24

    Micro nRF24

    Sub-miniature nRF24 module

    kebbin

    1 Comment

  • USB micro

    USB micro

    Universal Serial Bus (USB) is an industry standard that establishes specifications for cables and connectors and protocols for connection, communication and power supply (interfacing) between computers, peripherals and other computers

    chris

    1 Comment

  • Drone micro

    Drone micro

    Welcome to your new project. Imagine what you can build here.

    lucxiusdogi

    1 Comment

  • Microfono para medir fecuencia respiratoria

    Microfono para medir fecuencia respiratoria

    Welcome to your new project. Imagine what you can build here.

    mannoroth

  • Micromouse V1

    Micromouse V1

    Welcome to your new project. Imagine what you can build here.

    mbhavsar

  • Arduino Pro Micro AIO Board

    Arduino Pro Micro AIO Board

    Welcome to your new project. Imagine what you can build here.

    akkii

  • Microvia Test Project 23cd

    Microvia Test Project 23cd

    The Biskuit pendant is a WiFi/BLE Enabled wearable AI Diary which captures Images and sounds periodically and creates an audio visual timeline of your day so that you don't forget anything.

    kerry

  • Impedance Control USB Micro

    Impedance Control USB Micro

    Welcome to your new project. Imagine what you can build here.

    philipkyeswa

  • MicroVia Test

    MicroVia Test

    Welcome to your new project. Imagine what you can build here.

    collinsemasi

  • Impedance Control USB Micro 2P9c

    Impedance Control USB Micro 2P9c

    Welcome to your new project. Imagine what you can build here.

    jharwinbarrozo

  • gps tracker

    gps tracker

    A circuit for a gps tracker using stm32f103c8t6 and sim 808, that acquires and sends gps coordinates to a separate interfaced application. The circuit will be powered by a 12v dc battery so there a need for power regulation. there is a USB type micro B for code uploading.

    teamembedded

    &

    +2

    74 Comments

  • BMS

    BMS

    DIY BMS using ATTINY841-SSU this hardware has a higher balance current, fuse and TVS diode to help with voltage spikes. Most importantly, an external crystal to the micro controller (attiny841) which means the device is more reliable in low voltage situations

    romuro

    21 Comments

  • Pico Macro Keyboard oLR4

    Pico Macro Keyboard oLR4

    The Pico Macro Keyboard is a compact and powerful macro pad built using the latest Raspberry Pi Pico 2. Inspired by the Figma Creator Micro, this keyboard is designed for customizable control and enhanced productivity. It features mechanical switches with per-key RGB lighting, along with two rotary encoders for added functionality. With a modular 4-layer PCB and fully customizable keymaps, it seamlessly integrates with any software, making it perfect for designers, gamers, and power users alike.

    studiookkult

    13 Comments

  • ARC Microgrid(old)

    ARC Microgrid(old)

    Battery controller for a micro solar power grid.

    corynrobinson

    &

    10 Comments

  • [Example] Battery Management System ATTINY841

    [Example] Battery Management System ATTINY841

    DIY BMS using ATTINY841-SSU. This has a higher balance current, fuse and TVS diode to help with voltage spikes. Most importantly, an external crystal to the micro controller (attiny841) which means the device is more reliable in low voltage situations

    jharwinbarrozo

    8 Comments

  • BMS ppE1

    BMS ppE1

    DIY BMS using ATTINY841-SSU this hardware has a higher balance current, fuse and TVS diode to help with voltage spikes. Most importantly, an external crystal to the micro controller (attiny841) which means the device is more reliable in low voltage situations

    santhosha

    7 Comments

  • ATMEGA32U4-AU Template hXcf

    ATMEGA32U4-AU Template hXcf

    Arduino Template based on ATMEGA32U4-AU. This MCU is used in Arduino ATMEGA32U4, Arduino Leonardo, Arduino Micro, Arduino Pro Micro, and some other. This template is a good starting point for your Arduino based project. #Arduino #Micro #ATMEGA32U4 #Leonardo #Esplora #template #project #project-template

    dijachu

    3 Comments

  • BMS

    BMS

    DIY BMS using ATTINY841-SSU this hardware has a higher balance current, fuse and TVS diode to help with voltage spikes. Most importantly, an external crystal to the micro controller (attiny841) which means the device is more reliable in low voltage situations

    chaykak2

    &

    3 Comments

  • Quadcopter-Naze-32

    Quadcopter-Naze-32

    Naze 32 Revision 6 Flight Controller Schematic At the heart of the Naze32 is a 32bit ST micro work horse of a processor, with untapped memory and cpu power and a host of equally impressive sensors. The Naze is also matched up with some of the nicest GUI programs and features to get the most out of your configuration. Naze32 rev6 Features: USB on right side PPM/PWM input as through-hole 3.3V, I2C on standard-size headers Fully pinout compatible with rev5 accessories (OSDoge etc) SBUS Inverter Spectrum satellite MPU6500 Sonar pads w/resistors added for direct connection to 5V sonar All extra pads (FT, GP, A5) on top, only sonar on bottom BMP280 barometer 16mbit flash Guide: https://www.dronetrest.com/t/naze-32-revision-6-flight-controller-guide/1605

    iannunes

    1 Comment

  • Scale Snap 3D

    Scale Snap 3D

    3D Camera Module is a scalable SPI enabled 4 camera array pinout for 3D photogrammetry reconstruction which uses I2C to connect between each module to expand camera capacity while keeping capture sequences in sync. It uses ATMega32U4 with its built in USB 2.0 for data transfer and camera array adjustments and capture as well as a micro SD card slot for local image storage. An interrupt logic pinout should be used on the SPI master module as capture command. Each module is powered via USB-C (5V) or barrel jack (12V regulated to 5V).

    seeedstudio

    &

    1 Comment

  • ATMEGA32U4-AU Template hWdq

    ATMEGA32U4-AU Template hWdq

    Arduino Template based on ATMEGA32U4-AU. This MCU is used in Arduino ATMEGA32U4, Arduino Leonardo, Arduino Micro, Arduino Pro Micro, and some other. This template is a good starting point for your Arduino based project. #Arduino #Micro #ATMEGA32U4 #Leonardo #Esplora #template #project #project-template

    dijachu

    1 Comment

  • BMS

    BMS

    DIY BMS using ATTINY841-SSU this hardware has a higher balance current, fuse and TVS diode to help with voltage spikes. Most importantly, an external crystal to the micro controller (attiny841) which means the device is more reliable in low voltage situations

    ihscielle

    1 Comment

  • BMS

    BMS

    DIY BMS using ATTINY841-SSU this hardware has a higher balance current, fuse and TVS diode to help with voltage spikes. Most importantly, an external crystal to the micro controller (attiny841) which means the device is more reliable in low voltage situations

    santhosha

    1 Comment

  • Scale Snap 3D

    Scale Snap 3D

    3D Camera Module is a scalable SPI enabled 4 camera array pinout for 3D photogrammetry reconstruction which uses I2C to connect between each module to expand camera capacity while keeping capture sequences in sync. It uses ATMega32U4 with its built in USB 2.0 for data transfer and camera array adjustments and capture as well as a micro SD card slot for local image storage. An interrupt logic pinout should be used on the SPI master module as capture command. Each module is powered via USB-C (5V) or barrel jack (12V regulated to 5V).

    ihscielle

    1 Comment

  • ATMEGA32U4-AU Template hoJA 0b81

    ATMEGA32U4-AU Template hoJA 0b81

    Arduino Template based on ATMEGA32U4-AU. This MCU is used in Arduino ATMEGA32U4, Arduino Leonardo, Arduino Micro, Arduino Pro Micro, and some other. This template is a good starting point for your Arduino based project. #Arduino #Micro #ATMEGA32U4 #Leonardo #Esplora #template #project #project-template

    karurosu

    1 Comment

  • ATMEGA32U4-AU Template

    ATMEGA32U4-AU Template

    Arduino Template based on ATMEGA32U4-AU. This MCU is used in Arduino ATMEGA32U4, Arduino Leonardo, Arduino Micro, Arduino Pro Micro, and some other. This template is a good starting point for your Arduino based project. #Arduino #Micro #ATMEGA32U4 #Leonardo #Esplora #template #project #project-template

    vasy_skral

    1 Comment

  • BMS

    BMS

    DIY BMS using ATTINY841-SSU this hardware has a higher balance current, fuse and TVS diode to help with voltage spikes. Most importantly, an external crystal to the micro controller (attiny841) which means the device is more reliable in low voltage situations

    nicholas804

    1 Comment

  • Scale Snap 3D

    Scale Snap 3D

    3D Camera Module is a scalable SPI enabled 4 camera array pinout for 3D photogrammetry reconstruction which uses I2C to connect between each module to expand camera capacity while keeping capture sequences in sync. It uses ATMega32U4 with its built in USB 2.0 for data transfer and camera array adjustments and capture as well as a micro SD card slot for local image storage. An interrupt logic pinout should be used on the SPI master module as capture command. Each module is powered via USB-C (5V) or barrel jack (12V regulated to 5V).

    rex-test-org

    &

    1 Comment

  • UJ2-MIBH-G-SMT-TR igRU

    UJ2-MIBH-G-SMT-TR igRU

    Micro B, USB 2.0, 1.8 A, Right Angle, Surface Mount (SMT), USB Receptacle #receptacles

    oozliuoo

    1 Comment

  • Quadcopter-Naze-32

    Quadcopter-Naze-32

    Naze 32 Revision 6 Flight Controller Schematic At the heart of the Naze32 is a 32bit ST micro work horse of a processor, with untapped memory and cpu power and a host of equally impressive sensors. The Naze is also matched up with some of the nicest GUI programs and features to get the most out of your configuration. Naze32 rev6 Features: USB on right side PPM/PWM input as through-hole 3.3V, I2C on standard-size headers Fully pinout compatible with rev5 accessories (OSDoge etc) SBUS Inverter Spectrum satellite MPU6500 Sonar pads w/resistors added for direct connection to 5V sonar All extra pads (FT, GP, A5) on top, only sonar on bottom BMP280 barometer 16mbit flash Guide: https://www.dronetrest.com/t/naze-32-revision-6-flight-controller-guide/1605

    ihscielle

    1 Comment

  • [QA] Unique PCB

    [QA] Unique PCB

    Arduino Micro - MIDI Controller It uses the Arduino Micro as USB midi controller. It has 1 capacitive touch octave (12 Keys), 2 rotary encoders, a button, and a proximity sensor that can be used as a mod wheel, sustain pedal or MPE. The oled screen displays the different configuration options. It can be set to any channel or C.C. so it can be used to modify other instruments behavior. The capacitive touch keys can also be used as 12 drum machine pads.

    philipkyeswa

    1 Comment

  • Сonsole gamepad

    Сonsole gamepad

    DIY handheld game console with EFM32TG11B120F, OLED 0.91" 128x32 I2C, 4 buttons (2 on each side), CR1220 battery connector, and USB Micro for charging. #Gaming #IoT #Microcontroller #EmbeddedSystems #EFM32

    vasyl

    vasyl

    1 Comment

  • BMS 5qT3

    BMS 5qT3

    DIY BMS using ATTINY841-SSU this hardware has a higher balance current, fuse and TVS diode to help with voltage spikes. Most importantly, an external crystal to the micro controller (attiny841) which means the device is more reliable in low voltage situations

    santhosha

    1 Comment

  • [QA] Unique PCB

    [QA] Unique PCB

    Arduino Micro - MIDI Controller It uses the Arduino Micro as USB midi controller. It has 1 capacitive touch octave (12 Keys), 2 rotary encoders, a button, and a proximity sensor that can be used as a mod wheel, sustain pedal or MPE. The oled screen displays the different configuration options. It can be set to any channel or C.C. so it can be used to modify other instruments behavior. The capacitive touch keys can also be used as 12 drum machine pads.

    jaspreetqa

    1 Comment

  • Project ECHO - Okarche Edition

    Project ECHO - Okarche Edition

    Project Echo - Okarche Edition Micro Sensor for Studying Cyclonic Events and

    stormstalker

    1 Comment

  • Pico Macro Keyboard AI Placement [Example] jLYs

    Pico Macro Keyboard AI Placement [Example] jLYs

    The Pico Macro Keyboard is a compact and powerful macro pad built using the latest Raspberry Pi Pico 2. Inspired by the Figma Creator Micro, this keyboard is designed for customizable control and enhanced productivity. It features mechanical switches with per-key RGB lighting, along with two rotary encoders for added functionality. With a modular 4-layer PCB and fully customizable keymaps, it seamlessly integrates with any software, making it perfect for designers, gamers, and power users alike.

    htt2594

  • Pico Macro Keyboard AI Placement [Example] 8LvR

    Pico Macro Keyboard AI Placement [Example] 8LvR

    The Pico Macro Keyboard is a compact and powerful macro pad built using the latest Raspberry Pi Pico 2. Inspired by the Figma Creator Micro, this keyboard is designed for customizable control and enhanced productivity. It features mechanical switches with per-key RGB lighting, along with two rotary encoders for added functionality. With a modular 4-layer PCB and fully customizable keymaps, it seamlessly integrates with any software, making it perfect for designers, gamers, and power users alike.

    vishwa3080

  • Pico Macro Keyboard AI Placement [Example]

    Pico Macro Keyboard AI Placement [Example]

    The Pico Macro Keyboard is a compact and powerful macro pad built using the latest Raspberry Pi Pico 2. Inspired by the Figma Creator Micro, this keyboard is designed for customizable control and enhanced productivity. It features mechanical switches with per-key RGB lighting, along with two rotary encoders for added functionality. With a modular 4-layer PCB and fully customizable keymaps, it seamlessly integrates with any software, making it perfect for designers, gamers, and power users alike.

    pedromsm

  • Pico Macro Keyboard AI Placement [Example]

    Pico Macro Keyboard AI Placement [Example]

    The Pico Macro Keyboard is a compact and powerful macro pad built using the latest Raspberry Pi Pico 2. Inspired by the Figma Creator Micro, this keyboard is designed for customizable control and enhanced productivity. It features mechanical switches with per-key RGB lighting, along with two rotary encoders for added functionality. With a modular 4-layer PCB and fully customizable keymaps, it seamlessly integrates with any software, making it perfect for designers, gamers, and power users alike.

    gokhanm

  • Pico Macro Keyboard AI Placement [Example]

    Pico Macro Keyboard AI Placement [Example]

    The Pico Macro Keyboard is a compact and powerful macro pad built using the latest Raspberry Pi Pico 2. Inspired by the Figma Creator Micro, this keyboard is designed for customizable control and enhanced productivity. It features mechanical switches with per-key RGB lighting, along with two rotary encoders for added functionality. With a modular 4-layer PCB and fully customizable keymaps, it seamlessly integrates with any software, making it perfect for designers, gamers, and power users alike.

    cgad