Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

@copilot dame un circuito de punta logica automotriz sin componentes programables usa un voltimetro de 3 cables

1. Empieza con el objetivo Ejemplo: “Estoy creando un módulo de control para una bomba de aire de 24 V en una máquina CNC láser. El circuito debe encender y apagar la bomba según la señal FAN que viene de la tarjeta de control (3.3 V o 5 V).” 2. Explica los requerimientos La bomba trabaja a 24 V y hasta 2 A. El control debe ser con un MOSFET N–channel en conmutación. Debe incluir protección contra picos y ruidos eléctricos. Se deben mostrar indicadores LED (encendido, funcionamiento, error). 3. Lista de funciones que quieres en el diseño Protección: fusible, diodo flyback, TVS, snubber RC. Control: MOSFET con resistencia de gate y pull-down. Filtrado: capacitores cerca de la bomba. Indicadores LED: Azul: energía 24 V presente. Verde: bomba activa. Rojo: error o apagado. 4. Explica la lógica de funcionamiento (qué debe pasar) Cuando la fuente 24 V se conecta → LED azul enciende. Cuando la señal FAN activa el MOSFET → bomba enciende + LED verde enciende. Cuando la bomba está apagada → LED rojo puede encender (opcional). Si ocurre sobrecorriente → el fusible abre el circuito. 5. Diagrama de bloques sencillo (texto) [FUENTE 24V] -- [FUSIBLE] --+--> [BOMBA] --> [MOSFET] --> GND | +--> [LED Azul] --> GND [SALIDA FAN] --> [Res 100Ω] --> [Gate MOSFET] [Gate MOSFET] --> [Pull-down 100kΩ a GND] [Protecciones: Diodo, TVS, RC, Capacitores en paralelo con la bomba]

Test project for simulation logic gates behaviors

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

https://tinyurl.com/yxekhsaf

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

qr code scanner - model - symbol 2 rpi cams atmega connections leds + resistor + necessary logic gates diodes, capacitors, resistors etc wherever needed

A simple Logic Probe. Light and sound made correspond to the logical values of 1, 0, or Undefined. Power is supplied externally by the circuit being probed or some external supply. Supports 5V TTL & 3.3V TTL/CMOS. No Microcontrollers used. Manufactured by JLCPCB.

Design an 8-input to 3-output encoder WITH PRIORITY, considering: 1. truth table. 2. Output equations. 3. Logic diagram. You can use 2, 3 or 4 input logic gates if you prefer. You can do it in a notebook or in a simulator like multisim. If it is in a notebook, make sure that everything looks clean, so I suggest you do it first in draft and then to hand it in.

I want to create a standard interface from my PCBs to my test equipment. My equipment: PSU: Rigol DP832 Scope: Siglent SDS 1202X-E WaveGen: Siglent SDG810 Logic Analyzer: DSLogic Plus 400MHz VNA: NanoVNA V2 6 scope channels (4 1X, 2 10X) 8 Logic Analyzer channels 1 Wavegen channel 4 Power Nets ( 2 pins each) (tie power nets to oscilloscope inputs) #template #testing

This is a simulation of a 7-segment counter using digital logic gates (and, or, not). Three pulsed sources are required at A,B,C and should count out the binary 000-111. This is manufacturable and has a PCB design for it!

I want to create a standard interface from my PCBs to my test equipment. My equipment: PSU: Rigol DP832 Scope: Siglent SDS 1202X-E WaveGen: Siglent SDG810 Logic Analyzer: DSLogic Plus 400MHz VNA: NanoVNA V2 6 scope channels (4 1X, 2 10X) 8 Logic Analyzer channels 1 Wavegen channel 4 Power Nets ( 2 pins each) (tie power nets to oscilloscope inputs) #template #testing

3D Camera Module is a scalable SPI enabled 4 camera array pinout for 3D photogrammetry reconstruction which uses I2C to connect between each module to expand camera capacity while keeping capture sequences in sync. It uses ATMega32U4 with its built in USB 2.0 for data transfer and camera array adjustments and capture as well as a micro SD card slot for local image storage. An interrupt logic pinout should be used on the SPI master module as capture command. Each module is powered via USB-C (5V) or barrel jack (12V regulated to 5V).

I want to create a standard interface from my PCBs to my test equipment. My equipment: PSU: Rigol DP832 Scope: Siglent SDS 1202X-E WaveGen: Siglent SDG810 Logic Analyzer: DSLogic Plus 400MHz VNA: NanoVNA V2 6 scope channels (4 1X, 2 10X) 8 Logic Analyzer channels 1 Wavegen channel 4 Power Nets ( 2 pins each) (tie power nets to oscilloscope inputs) #template #testing

I want to create a standard interface from my PCBs to my test equipment. My equipment: PSU: Rigol DP832 Scope: Siglent SDS 1202X-E WaveGen: Siglent SDG810 Logic Analyzer: DSLogic Plus 400MHz VNA: NanoVNA V2 6 scope channels (4 1X, 2 10X) 8 Logic Analyzer channels 1 Wavegen channel 4 Power Nets ( 2 pins each) (tie power nets to oscilloscope inputs) #template #testing

I want to create a standard interface from my PCBs to my test equipment. My equipment: PSU: Rigol DP832 Scope: Siglent SDS 1202X-E WaveGen: Siglent SDG810 Logic Analyzer: DSLogic Plus 400MHz VNA: NanoVNA V2 6 scope channels (4 1X, 2 10X) 8 Logic Analyzer channels 1 Wavegen channel 4 Power Nets ( 2 pins each) (tie power nets to oscilloscope inputs) #template #testing

3D Camera Module is a scalable SPI enabled 4 camera array pinout for 3D photogrammetry reconstruction which uses I2C to connect between each module to expand camera capacity while keeping capture sequences in sync. It uses ATMega32U4 with its built in USB 2.0 for data transfer and camera array adjustments and capture as well as a micro SD card slot for local image storage. An interrupt logic pinout should be used on the SPI master module as capture command. Each module is powered via USB-C (5V) or barrel jack (12V regulated to 5V).

I want to create a standard interface from my PCBs to my test equipment. My equipment: PSU: Rigol DP832 Scope: Siglent SDS 1202X-E WaveGen: Siglent SDG810 Logic Analyzer: DSLogic Plus 400MHz VNA: NanoVNA V2 6 scope channels (4 1X, 2 10X) 8 Logic Analyzer channels 1 Wavegen channel 4 Power Nets ( 2 pins each) (tie power nets to oscilloscope inputs) #template #testing

I want to create a standard interface from my PCBs to my test equipment. My equipment: PSU: Rigol DP832 Scope: Siglent SDS 1202X-E WaveGen: Siglent SDG810 Logic Analyzer: DSLogic Plus 400MHz VNA: NanoVNA V2 6 scope channels (4 1X, 2 10X) 8 Logic Analyzer channels 1 Wavegen channel 4 Power Nets ( 2 pins each) (tie power nets to oscilloscope inputs) #template #testing

A digital logic gate that gives an output of 0 when any of its inputs are 1, otherwise 1.

I want to create a standard interface from my PCBs to my test equipment. My equipment: PSU: Rigol DP832 Scope: Siglent SDS 1202X-E WaveGen: Siglent SDG810 Logic Analyzer: DSLogic Plus 400MHz VNA: NanoVNA V2 6 scope channels (4 1X, 2 10X) 8 Logic Analyzer channels 1 Wavegen channel 4 Power Nets ( 2 pins each) (tie power nets to oscilloscope inputs) #template #testing

Texas Instruments presents the CD4051B, CD4052B, and CD4053B series, a family of CMOS single 8-Channel, differential 4-Channel, and triple 2-Channel analog multiplexers or demultiplexers with logic-level conversion. Engineered for precise, reliable control of analog and digital signals, these components are characterized by their wide range of signal handling (3 V to 20 V for digital and up to 20 VP-P for analog signals), low ON resistance (125 Ω typical over 15 VP-P signal input range for VDD - VEE = 18 V), high OFF resistance (+100 pA typical channel leakage at VDD - VEE = 18 V), and minimal quiescent power dissipation (0.2 μW typical at VDD - Vss = VDD - VEE = 10 V). They come equipped with on-chip binary address decoding for easy integration and minimized system logic complexity. Available in a variety of package types, including CDIP, PDIP, SOIC, SOP, and TSSOP, these multiplexers/demultiplexers support a broad spectrum of analog to digital and digital to analog conversion applications, signal gating, factory automation, and other uses where reliable signal handling is crucial. With parametric ratings at 5 V, 10 V, and 15 V, and an operational temperature range of -55°C to 125°C, these components are also 100% tested for quiescent current at 20 V, assuring dependable performance across diverse environmental conditions.

USB-C to SATA portable external hard drive enclosure controller. Architecture includes USB Type-C 5 V sink input with 5.1 kΩ CC pull-downs, VBUS ESD/TVS and overcurrent protection, USB 3.2 Gen1 SuperSpeed differential pairs into a USB-to-SATA bridge, SATA data and power output for a 2.5-inch drive, regulated 3.3 V logic rail with optional 1.8 V rail if required by the bridge, 25 MHz reference clock, power/activity LEDs, and test points. Design target is compact portable use with stable spin-up power delivery, low EMI, controlled-impedance high-speed routing, and production-grade BOM options.

36 V Contactor Coil Driver with Safe Kill Loop, 3.3 V Logic, SPI IMU, 24 V/5 A Buck, and ESP32 IO12-Driven E-Stop MOSFET via Series PH2.0 Safety Connectors #E_STOP #MOSFET #PH2.0 #SAFETY

Voice-Controlled LTE Print-on-Demand Terminal (Quectel EC800M + ESP32-WROOM-32D BT Printer Interface, Protected USB-C 5 V Input, Unified 3.3 V Logic Rail, 8.5 V/3 A Printer Supply with High-Side FET & Protections, Locked Display/Audio/Radio I/O — Layout-Ready) #EC800M #USB-C-Protected #3V3Only #8.5V3A #LockedI/O

Production-Ready 2-Layer ESP32-S3 Controller PCB: Dual WROOM-1U/WROOM-1 Footprints, ESD-Protected USB-C Debug, Protected 12 V Input (Fuse, Reverse Diode, TVS), TPS5430DDA Buck + TLV70033DDCT LDO Power, Integrated TMC2209 Stepper Driver, 3× 12 V/2 A LED Channels with Screw Terminals, Comprehensive Test Points, Full BOM/Pin Map/Gerbers, Logic Power Supply Audited and Validated #ESP32S3 #PowerManagement #MotorControl #LEDControl #ProductionReady #PowerAudit

An 8-bit processor designed to perform arithmetic and logical operations. It processes data in 8-bit chunks and supports basic computation tasks such as addition, subtraction, comparison, and bitwise logic, making it a fundamental building block for simple computing systems.

IC BCD-TO-7SEG DECODR/DVR 16-DIP #CommonPartsLibrary #IntegratedCircuit #Decoder #Multiplexer #Logic

ESP32 /eMMC Integration with Bidirectional Level Shifting Project Overview: This project aims to integrate an ESP32 microcontroller with an eMMC (embedded Multi Media Card) storage module to create a robust data processing and storage solution. The system utilizes bidirectional level shifting to ensure seamless communication between the 3.3V logic of the ESP32 and the 1.8V logic of the eMMC, enabling efficient data handling and processing. Objectives: Data Storage and Processing: Leverage the high-speed capabilities of the eMMC for data storage while offloading processing tasks from the ESP32 to enhance overall system performance. Voltage Level Compatibility: Implement a bidirectional level shifting solution to facilitate communication between the ESP32 and eMMC, ensuring signal integrity and compatibility across different voltage levels. Modular Design: Create a modular and scalable design that can be easily adapted for various applications, including IoT devices, data logging systems, and embedded applications. Key Components: ESP32 Microcontroller: A powerful microcontroller with integrated Wi-Fi and Bluetooth capabilities, ideal for IoT applications. eMMC Storage Module: A high-speed storage solution that provides ample memory for data-intensive applications. Bidirectional Level Shifter: A 20-channel level shifter (74LVC4245 and TXB0104D) to convert signals between 1.8V and 3.3V, ensuring reliable communication between the ESP32 and eMMC. Power Management: Utilize a MIC5205 LDO voltage regulator to step down the 3.3V supply to 1.8V for the eMMC, ensuring stable power delivery. Implementation Steps: Circuit Design: Design the circuit schematic, including connections for the ESP32, eMMC, level shifter, and power management components. PCB Layout: Create a PCB layout that optimizes trace lengths for high-speed signals, ensuring proper length matching and minimizing noise. Firmware Development: Develop firmware for the ESP32 to handle data reading, writing, and processing tasks, as well as managing communication with the eMMC. Testing and Validation: Conduct thorough testing to validate the functionality of the system, ensuring reliable data transfer and processing capabilities. Expected Outcomes: A fully functional system that demonstrates the integration of the ESP32 with eMMC storage, showcasing efficient data handling and processing. A modular design that can be adapted for various applications, providing a foundation for future projects in IoT and embedded systems.

Digital Logic Circuit with Enhanced LED Output Requirements This project is designed to deliver advanced digital logic functionality incorporating precise circuit requirements tailored for LED output. It outlines a detailed digital logic function where specific logical conditions trigger LED activation, ensuring optimal brightness and reliability. The circuit is engineered with strict voltage regulation and current limiting mechanisms to safeguard the LED and maintain consistent performance. Emphasizing modularity and scalability, this design meets industry-standard digital protocols and electronic reliability benchmarks, streamlining development while delivering robust and efficient LED interfacing. #DigitalLogic #LEDOutput #CircuitDesign #ElectronicEngineering #ElectronicsDesign

TMF8801-1BM time-of-flight (ToF) sensor from ams-OSRAM. It comprises electronic components such as resistors, capacitors, voltage regulators, and GPIO connectors. The logic signals are managed via Mosfets BSS138 while the Sensor IC is powered & controlled by a 3.3V AP2112K Voltage Regulator.

This is a reference design of a PCB utilizing the TMF8820-1AM time-of-flight (ToF) sensor from ams-OSRAM. It comprises electronic components such as resistors, capacitors, voltage regulators, and GPIO connectors. The logic signals are managed via Mosfets BSS138 while the Sensor IC is powered & controlled by a 3.3V AP2112K Voltage Regulator. #industrialSensing #referenceDesign #lzer #I2C #osramusa #template #reference-design

The EMF30N02J from Excelliance MOS Corporation is an N-Channel Logic Level Enhancement Mode Field Effect Transistor designed for high efficiency and performance in a compact SOT-23 package. With a maximum Drain-Source voltage (BVDSS) of 20V and a maximum Drain current (ID) of 5A at 25°C, this MOSFET is ideal for low-voltage switching applications. It features a low maximum Drain-Source On-State Resistance (RDSON) of 30mΩ at a Gate-Source voltage (VGS) of 4.5V, ensuring minimal power dissipation. The component supports a Gate-Source voltage (VGS) up to +12V and operates within a temperature range of -55°C to 150°C. The EMF30N02J is also Pb-Free, Halogen-Free, and classified as a GP Green Product, making it environmentally friendly. Key electrical characteristics include a Gate Threshold Voltage (VGS(th)) between 0.45V and 1.2V, a maximum Gate-Body Leakage (IGSS) of 100nA, and a typical Forward Transconductance (gfs) of 7S. Additionally, the MOSFET exhibits excellent dynamic performance with a total Gate Charge (Qg) of 6.2nC, making it suitable for high-speed switching applications. The thermal resistance is rated at 100°C/W from junction-to-ambient and 55°C/W from junction-to-lead, ensuring efficient thermal management.

I want to create a standard interface from my PCBs to my test equipment. My equipment: PSU: Rigol DP832 Scope: Siglent SDS 1202X-E WaveGen: Siglent SDG810 Logic Analyzer: DSLogic Plus 400MHz VNA: NanoVNA V2 6 scope channels (4 1X, 2 10X) 8 Logic Analyzer channels 1 Wavegen channel 4 Power Nets ( 2 pins each) (tie power nets to oscilloscope inputs) #template #testing

3D Camera Module is a scalable SPI enabled 4 camera array pinout for 3D photogrammetry reconstruction which uses I2C to connect between each module to expand camera capacity while keeping capture sequences in sync. It uses ATMega32U4 with its built in USB 2.0 for data transfer and camera array adjustments and capture as well as a micro SD card slot for local image storage. An interrupt logic pinout should be used on the SPI master module as capture command. Each module is powered via USB-C (5V) or barrel jack (12V regulated to 5V).

I want to create a standard interface from my PCBs to my test equipment. My equipment: PSU: Rigol DP832 Scope: Siglent SDS 1202X-E WaveGen: Siglent SDG810 Logic Analyzer: DSLogic Plus 400MHz VNA: NanoVNA V2 6 scope channels (4 1X, 2 10X) 8 Logic Analyzer channels 1 Wavegen channel 4 Power Nets ( 2 pins each) (tie power nets to oscilloscope inputs)

This is a simulation of a 7-segment counter using digital logic gates (and, or, not). Three pulsed sources are required at A,B,C and should count out the binary 000-111. This is manufacturable and has a PCB design for it!

The FDV301N from ON Semiconductor® is an N-Channel logic level enhancement mode field effect transistor (FET), designed using ON Semiconductor's proprietary, high cell density, DMOS technology. This component is optimized for low voltage applications, offering a compact and efficient alternative to traditional digital transistors. It boasts a drain-source voltage (VDS) of 25V, a continuous drain current of 0.22A, and a peak drain current of 0.5A. The FDV301N features very low gate drive requirements, making it suitable for direct operation in 3V circuits, with a gate threshold voltage (VGS(th)) of less than 1.06V. The device also includes a gate-source Zener diode for enhanced ESD ruggedness, rated at over 6kV Human Body Model. With a maximum RDS(ON) of 5Ω at VGS=2.7V and 4Ω at VGS=4.5V, this FET is ideal for applications requiring minimal on-state resistance. The FDV301N is available in various packages including SOT-23, SuperSOT™-6, and SuperSOT™-8, providing flexibility for different design requirements.

The NTK3134N from ON Semiconductor is a high-performance, single N-Channel MOSFET designed for power and interface switching applications in ultra-small portable electronics. Packaged in a compact SOT-723 form factor, which is 44% smaller in footprint and 38% thinner than the SC89, this MOSFET features a low RDS(on) for efficient load switching. It operates at low logic level gate drives, with a maximum drain-to-source voltage (VDSS) of 20V and a continuous drain current (ID) of up to 890mA at 25°C. The component supports pulsed drain currents up to 1.8A and boasts ESD protection. The NTK3134N is also Pb-Free, Halogen Free/BFR Free, and RoHS Compliant, making it an environmentally friendly choice for designers. Key applications include load/power switching, interface switching, logic level shifting, and battery management.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.