Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

I want make a board that trigger a green and red LED with three wire, 0V, 24V and output of proximity switch. but i want output wire remain 0V when not connected.

Simulation of a broken neutral wire from panel to pole in a home

3 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole #screwblock #connector #commonPartsLibrary

A simple PCB for interfacing smart thermostats requiring a C wire with a boiler's zone controller by incorporating an auxiliary 24VAC power supply.

This is the multipurpose PCB that works with Arduino Nano, a way that you can run 2 Stepper motors, 2 DC motors, 2 Servo motors at the same time and this is not it you can even connect BT module, rotary encoder, I2C device, potentiometer at same time. This PCB is very much helpful in building any project and no need to worry about messy wire connections.

This is the multipurpose PCB that works with Arduino Nano, a way that you can run 2 Stepper motors, 2 DC motors, 2 Servo motors at the same time and this is not it you can even connect BT module, rotary encoder, I2C device, potentiometer at same time. This PCB is very much helpful in building any project and no need to worry about messy wire connections.

X9C103 digital potentiometer with a serial, 3 wire interface. 10K.

This is the multipurpose PCB that works with Arduino Nano, a way that you can run 2 Stepper motors, 2 DC motors, 2 Servo motors at the same time and this is not it you can even connect BT module, rotary encoder, I2C device, potentiometer at same time. This PCB is very much helpful in building any project and no need to worry about messy wire connections.

Headers & Wire Housings R/A HEADER 3 POS TIN SINGLE ROW

ride by wire throttle driver circuit

Headers & Wire Housings R/A HEADER 3 POS TIN SINGLE ROW

3 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole

A variety of Blues Wireless boards, carriers, notecards

Schmeatic of an wireless sensor node capable of acquiring wind data within a mean fitting deviation of ±0.063398 m/s, store them and present them wirelessly to an IEEE 802.15.4 protocol sink node

4×4 cm USB-C PD & Qi Wireless Power Bank with Li-Po Charging, Power-Path Management, 3.3 V LDO, Full-Bridge Gate Driver, LED Resistors, and Corrected 5 V Output Feedback (Schematic Cleaned: Redundant Net Portals/Passives Removed, Fuel-Gauge LED Channels Verified, ERC/DRC Issues Resolved)

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

The LTC3109 from Linear Technology is a highly integrated DC/DC converter specifically designed for energy harvesting applications. It can operate from ultra-low input voltages as low as 30mV, utilizing a unique, proprietary auto-polarity architecture to function regardless of input polarity. The component is ideal for harvesting energy from thermoelectric generators (TEGs) and thermopiles, efficiently converting this energy to power remote sensors, wireless transmitters, and low-power devices. Key features include selectable output voltages of 2.35V, 3.3V, 4.1V, or 5V, a 2.2V low-dropout (LDO) regulator, a logic-controlled output, and an energy storage system to maintain operation during power interruptions. The LTC3109 is encapsulated in a small, 20-lead (4mm × 4mm) QFN or SSOP package, making it compact and suitable for space-constrained applications in HVAC systems, building automation, and industrial wireless sensing. Additionally, the power good indicator and the ability to use compact step-up transformers further enhance its suitability for low power, energy-harvesting systems.

Firefly Board is part of a smart network designed for wireless control of light, water and other parts of the house in locations where GSM communication and WiFi are not available. #LoRa #smart #IoT #power #led #arm #stm32

The component under discussion is designed for advanced electronic systems, targeting applications that require reliable connectivity and precise data acquisition. Engineered by SEMTECH, a leader in high-performance analog and mixed-signal semiconductors and advanced algorithms, this module showcases its prowess in the realm of wireless technology. It incorporates the LR112x series chips, specifically mentioning the LR1120 and LR1121, which are notable for their low power consumption and robustness in communication capabilities. These chips cater to a variety of frequency bands, with explicit mentions of R915 and R868, indicating their suitability for a broad range of geographical regions and regulatory requirements. This module is particularly designed with an eye towards innovation in the domain of Internet of Things (IoT) applications, offering features that ensure seamless integration into existing technology with an emphasis on ease of deployment and operational efficiency. Key features highlighted include multiple onboard antennae options such as ANT_GNSS and ANT_WIFI, ensuring comprehensive connectivity solutions for different environmental and application requirements. Also notable is the mention of a VOD_RADIO and the inclusion of interfaces like SPI and BUSY signaling, underscoring the component's flexibility in system integration and communication protocol support. Furthermore, SEMTECH references specific considerations for design and regulatory compliance, indicating the component's targeted use in professional grade equipment and scenarios. The datasheet also hints at an evaluation-focused approach, with designations like "For evaluation only" and remarks on FCC approval status, suggesting that this component is positioned for development and testing in cutting-edge wireless applications. This focus on flexibility, regulatory compliance, and advanced connectivity options positions SEMTECH's component as a crucial asset for designers and engineers looking to innovate in the IoT and wireless communication sectors.

This project involves designing a versatile IoT sensor hub using the ESP32-WROOM-32E module. The main objective is to create a platform that enables seamless data collection and transmission from various environmental sensors over a WiFi network. The device will feature USB-C for power and data transfer, and will utilize on-board voltage regulation to ensure stable operation. A CH340C chip is employed for USB to serial conversion, facilitating easy programming and communication with a host computer. Key Features: Wireless Connectivity: Leverage the ESP32's built-in WiFi capabilities for real-time data transmission to cloud-based platforms or local servers. USB-C Interface: Utilize a modern USB-C connector for power and data transfer, providing flexibility and future-proofing the design. On-board Voltage Regulation: Include an AMS1117-3.3 voltage regulator to maintain a stable 3.3V output from the USB input, protecting sensitive components. Support for Multiple Sensors: Integrate various GPIOs to connect multiple sensor types ( temperature, humidity, air quality ) (temperature, humidity, air quality) for comprehensive environmental monitoring. Expandability: Design with additional headers for future expansion, enabling users to customize and extend the hub's capabilities with additional sensors or modules. Applications: Smart Home Automation: Integrating with home systems to monitor and respond to environmental changes. Environmental Monitoring: Providing data for ecological studies or urban environment monitoring. Industrial IoT: Enhancing systems within a factory or industrial setting to track conditions in real-time. With this setup, the device aims to be a robust and adaptable piece of technology, suitable for hobbyists, researchers, and developers interested in the expanding world of IoT.

The Texas Instruments TPA3140D2 is a high-efficiency, Class-D audio power amplifier designed for driving bridged-tied stereo speakers with outputs up to 10 W per channel into 6 Ω or 8 Ω loads. With advanced EMI suppression technology, including spread spectrum control and a 1SPW modulation scheme, the TPA3140D2 ensures robust performance while minimizing electromagnetic interference. Operating within a wide supply voltage range from 4.5 V to 14.4 V, this amplifier eliminates the need for heat sinks due to its up to 90% efficient Class-D operation. Integrated SpeakerGuard™ protection features such as automatic gain limit (AGL), adjustable power limiter, and DC protection enhance speaker safety and audio quality. Additionally, the TPA3140D2 includes comprehensive protection against pin-to-pin, pin-to-ground, and pin-to-power short circuits, as well as thermal protection with auto recovery. The device offers four selectable fixed gain settings and supports both single-ended and differential analog inputs, making it suitable for a variety of consumer audio applications including televisions, wireless speakers, mini speakers, and USB speakers. The TPA3140D2 is available in a 28-pin HTSSOP package, ensuring ease of integration into compact designs.

This is a WiFi to Infrared (IR) gateway reference design leveraging an ESP32-S3 microcontroller for WiFi connectivity. It also incorporates a Type-C USB interface for data and power, 3 LEDs (red, green, & IR), and voltage regulation. It facilitates wireless control of IR devices, suitable for home automation projects. #referenceDesign #edge-computing #espressif #template #IR #project #reference-design

This is a WiFi to Infrared (IR) gateway reference design leveraging an ESP32-S3 microcontroller for WiFi connectivity. It also incorporates a Type-C USB interface for data and power, 3 LEDs (red, green, & IR), and voltage regulation. It facilitates wireless control of IR devices, suitable for home automation projects. #referenceDesign #edge-computing #espressif #template #IR #project #reference-design

Product Type: Wearable AI pendant Primary Function: Records audio, generates transcripts, and organizes information about daily interactions User Interaction: Input: Activation button Output: RGB LED ring, Bluetooth link to phone Key Features: Audio Recording: Activated by button press Transcription: Converts audio to text Sentiment Analysis: Embedded AI evaluates sentiment Information Management: Filters essential information and action items Technical Specifications Form Factor: Wearable pendant Display: RGB LED ring around the edge Sensors: 2 Microphones 1 Button Connectivity: Bluetooth for phone linkage Wi-Fi USB-C for charging Wireless Protocol: Wi-Fi, Bluetooth Battery Type: LiPo 2000 mAh Battery Life: 6 hours of continuous use Charging Method: USB-C Operating Voltage: 3.3V Operating Conditions: Temperature Range: -10°C to 70°C Humidity: 10 to 90% Software: Python for AI and processing Compliance: RoHS, FCC, CE Reliability: 20,000 hrs Life Cycle Expectancy: 10 years AI Capabilities Speech to Text Recognition: Converts audio input to written text Embedded AI Sentiment Analysis: Evaluates the mood or sentiment expressed in the text Essential Information Filtering: Identifies and segregates crucial data and actionable items Power Consumption and Efficiency Power consumption must align with battery capacity to ensure 6 hours of continuous operational use.

Biskuit is a compact, ESP32-S3-powered wearable device designed for real-time transcription and effortless note-taking. Featuring a 3-microphone array and wireless communication to sync to to the cloud instantly.

This is a WiFi to Infrared (IR) gateway reference design leveraging an ESP32-S3 microcontroller for WiFi connectivity. It also incorporates a Type-C USB interface for data and power, 3 LEDs (red, green, & IR), and voltage regulation. It facilitates wireless control of IR devices, suitable for home automation projects. #referenceDesign #edge-computing #espressif #template #IR #project #reference-design

Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply (including LED), a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. #template

This is a WiFi to Infrared (IR) gateway reference design leveraging an ESP32-S3 microcontroller for WiFi connectivity. It also incorporates a Type-C USB interface for data and power, 3 LEDs (red, green, & IR), and voltage regulation. It facilitates wireless control of IR devices, suitable for home automation projects. #referenceDesign #edge-computing #espressif #template #IR #project #reference-design

Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply (including LED), a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. #template

This is a BLE to WiFi gateway Reference Design. It employs an ESP32 microcontroller and an STM32WB5MMGH6TR for BLE functionality. The design includes connectors, multiple capacitors, resistors, switches, and LEDs. USB Type-C is used for power and data. This could be used for IoT purposes in home automation or wireless sensor data transmission. #referenceDesign #edge-computing #espressif #stm #template #ble #reference-design

This is a WiFi to Infrared (IR) gateway reference design leveraging an ESP32-S3 microcontroller for WiFi connectivity. It also incorporates a Type-C USB interface for data and power, 3 LEDs (red, green, & IR), and voltage regulation. It facilitates wireless control of IR devices, suitable for home automation projects. #referenceDesign #edge-computing #espressif #template #IR #project #reference-design

Product Type: Wearable AI pendant Primary Function: Records audio, generates transcripts, and organizes information about daily interactions User Interaction: Input: Activation button Output: RGB LED ring, Bluetooth link to phone Key Features: Audio Recording: Activated by button press Transcription: Converts audio to text Sentiment Analysis: Embedded AI evaluates sentiment Information Management: Filters essential information and action items Technical Specifications Form Factor: Wearable pendant Display: RGB LED ring around the edge Sensors: 2 Microphones 1 Button Connectivity: Bluetooth for phone linkage Wi-Fi USB-C for charging Wireless Protocol: Wi-Fi, Bluetooth Battery Type: LiPo 2000 mAh Battery Life: 6 hours of continuous use Charging Method: USB-C Operating Voltage: 3.3V Operating Conditions: Temperature Range: -10°C to 70°C Humidity: 10 to 90% Software: Python for AI and processing Compliance: RoHS, FCC, CE Reliability: 20,000 hrs Life Cycle Expectancy: 10 years AI Capabilities Speech to Text Recognition: Converts audio input to written text Embedded AI Sentiment Analysis: Evaluates the mood or sentiment expressed in the text Essential Information Filtering: Identifies and segregates crucial data and actionable items Power Consumption and Efficiency Power consumption must align with battery capacity to ensure 6 hours of continuous operational use.

The AAduino is an wireless Arduino clone the size of an AA battery with Keystone battery terminals rotated 180° to act as positive and negative terminals. #atmega #aa #battery