IC MUX 32:1 5.5OHM 48LFCSP

Zero-Drift Programmable Gain Amplifier With Mux, VSSOP-10 #Analog #commonpartslibrary

High-Speed CMOS Logic 16-Channel Analog Multiplexer/Demultiplexer, SSOP-24 multiplexer demultiplexer mux demux SSOP*5.3x8.2mm*P0.65mm*

0.5Ω CMOS 1.65V to 3.6V Dual SPDT/2:1 MUX, Mini LFCSP-10 Package 1.3x1.6mm analog switch Analog_LFCSP*1.3x1.6mm*P0.4mm*

SPDT DC-4GHz reflective switch, 43dB isolation at 1GHz, LFCSP-8 RF Mux SPDT switch CMOS LVTTL LFCSP*1EP*3x3mm*P0.5mm*

6-channel analog mux, TSSOP-24 SPI qSPI multiplexer demux TSSOP*4.4x7.8mm*P0.65mm*

Zero-Drift Programmable Gain Amplifier With Mux, x1/x2/x4/x8/x16/x32/x64/x128 gains, VSSOP-10 PGA SPI TSSOP*3x3mm*P0.5mm*

ESD-Protected, Low Capacitance, 2-Channel, 2:1 Switch, With Powered-off Protection, VSSOP-10 mux multiplexer VSSOP*3x3mm*P0.5mm*

SPDT DC-4GHz absorbative switch, 43dB isolation at 1GHz, LFCSP-8 RF Mux SPDT switch CMOS LVTTL LFCSP*1EP*3x3mm*P0.5mm*

IC SURGE STOPPER 2.7V~23V VQFN-10-HR(2x2) The TPS25947xx family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short-circuits, voltage surges, reverse polarity and excessive inrush current. With integrated back-to-back FETs, reverse current flow from output to input is blocked at all times, making the devices an excellent choice for power MUX/ORing applications as well as systems which need load side energy hold up storage in case input power supply fails. The devices use linear ORing based scheme to establish an almost zero DC reverse current and emulate ideal diode behavior with minimum forward voltage drop and power dissipation. Output slew rate and inrush current can be adjusted using an external capacitor. Loads are protected from input overvoltage conditions either by clamping the output to a safe fixed maximum voltage (pin selectable), or by cutting off the output if input exceeds an adjustable overvoltage threshold. The devices respond to output overload by actively limiting the current or breaking the circuit. The output current limit threshold as well as the transient overcurrent blanking timer are user adjustable. The current limit control pin also functions as an analog load current monitor. The devices are available in a 2mm × 2mm, 10- pin HotRod™ QFN package for improved thermal performance and reduced system footprint. The devices are characterized for operation over a junction temperature range from –40°C to +125°C. • Wide operating input voltage range: 2.7V to 23V – 28V absolute maximum – Withstands negative voltages up to –15V • Integrated back-to-back FETs with low onresistance: RON = 28.3mΩ (typical) • Ideal diode operation with true reverse-current blocking • Fast overvoltage protection – Overvoltage clamp (OVC) with pin-selectable threshold (3.8V, 5.7V, 13.8V) and 5μs (typical) response time OR – Adjustable overvoltage lockout (OVLO) with 1.2μs (typical) response time • Overcurrent protection with load current monitor output (ILM) – Active current limit OR circuit-breaker options – Adjustable threshold (ILIM) 0.5A to 6A • ±10% accuracy for ILIM > 1A – Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × ILIM – Output load current monitor accuracy: ±6% (IOUT ≥ 1A) • Fast-trip response for short-circuit protection – 500ns (typical) response time – Adjustable (2 × ILIM) and fixed thresholds • Active high enable input with adjustable undervoltage lockout threshold (UVLO) • Adjustable output slew rate control (dVdt) • Overtemperature protection • Digital outputs – Priority power MUX control (AUXOFF) and fault indication (FLT) or – Power Good indication (PG) with adjustable threshold (PGTH) • UL 2367 recognition – File No. E339631 – RILM ≥ 750Ω • IEC 62368-1 CB certified • Small footprint: QFN 2mm × 2mm, 0.45mm pitch #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Charger IC Lithium Ion/Polymer 29-VQFN-HR (4x4) The BQ25792 is a fully integrated switch-mode buck-boost charger for 1-4 cell Li-ion batteries and Li-polymer batteries. The integration includes 4 switching MOSFETs (Q1, Q2, Q3, Q4), input and charging current sensing circuits, the battery FET (QBAT) and all the loop compensation of the buck-boost converter. It uses NVDC power path management, regulating the system slightly above the battery voltage without dropping below a configurable minimum system voltage. When system power exceeds the input source rating, battery supplement mode supports the system without overloading the input source. BQ25792 supports the full input and output (OTG) voltage ranges for USB Type-C™ and USB power delivery (USB-PD) applications. • High power density, high integration buck-boost charger for 1-4 cell batteries supporting any USB PD 3.0 profile – Integrates four switching MOSFETs, BATFET – Integrates input and charging current sensing • Highly efficient – 750-kHz or 1.5-MHz switching frequencies – 5-A charging current with 10-mA resolution • 96.5% efficient: 16-V battery at 3A from 20V • Supports a wide range of input sources – 3.6-V to 24-V wide input operating voltage range with 30-V absolute maximum rating – Maximum power tracking with input voltage dynamic power management (VINDPM) up to 22 V and input current dynamic power management (IINDPM) up to 3.3 A – Detects USB BC1.2, SDP, CDP, DCP, HVDCP and non-standard adapters • Dual-input power mux controller (optional) for source selection • Narrow voltage DC (NVDC) power path management • Powers USB port from battery (USB OTG) – 2.8-V to 22-V OTG output voltage with 10-mV resolution to support USB-PD PPS – OTG output current regulation up to 3.32 A with 40-mA resolution • Flexible autonomous and I2C mode for optimal system performance • Integrated 16-bit ADC for voltage, current, and temperature monitoring • Low battery quiescent current – 21 µA for battery only operation – 600 nA in Charger Shutdown Mode • High accuracy – +0.65% to -0.85% charge voltage regulation for 2S-4S batteries – ±5% charge current regulation – ±5% input current regulation • Safety – Thermal regulation and thermal shutdown – Input/battery OVP and OCP – Converter MOSFETs OCP – Charging safety timer • Package – 29-Pin 4 mm × 4 mm QFN #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Battery-Charger

SOP65P640X110-20N

High-Speed CMOS Logic 16-Channel Analog Multiplexer/Demultiplexer, SOIC-24 multiplexer demultiplexer mux demux SOIC*W*7.5x15.4mm*P1.27mm*

SPDT DC-4GHz absorbative switch, 43dB isolation at 1GHz, MSOP-8 RF Mux SPDT switch CMOS LVTTL MSOP*3x3mm*P0.65mm*

MUX08FPZ PDIP-16_L19.3-W6.4-P2.54-LS7.9-BL LCSC Part Number: C690858 JLCPCB Part Class: undefined Manufactured by ADI(亚德诺)/LINEAR

MUX08FPZ PDIP-16_L19.3-W6.4-P2.54-LS7.9-BL LCSC Part Number: C690858 JLCPCB Part Class: undefined Manufactured by ADI(亚德诺)/LINEAR

MUX08FPZ PDIP-16_L19.3-W6.4-P2.54-LS7.9-BL LCSC Part Number: C690858 JLCPCB Part Class: undefined Manufactured by ADI(亚德诺)/LINEAR

Signal Switches / Encoders & Decoders / Multiplexers MUX08FSZ SOIC-16_L9.9-W3.9-P1.27-LS6.0-BL LCSC Part Number: C690860 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

Signal Switches / Encoders & Decoders / Multiplexers MUX08FSZ SOIC-16_L9.9-W3.9-P1.27-LS6.0-BL LCSC Part Number: C690860 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

Signal Switches / Encoders & Decoders / Multiplexers MUX08FSZ SOIC-16_L9.9-W3.9-P1.27-LS6.0-BL LCSC Part Number: C690860 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)