Zener Diode Single 3.9V 2% 90Ohm 500mW 2-Pin Mini-MELF T/R #CommonPartsLibrary #Zener #Diodes #SingleZenerDiodes #BZV55

Zener Diode Single 62V 5% 215Ohm 500mW 2-Pin Mini-MELF T/R #CommonPartsLibrary #Zener #Diodes #SingleZenerDiodes #BZV55

Diode Zener Single 51V 2% 500mW 2-Pin Mini-MELF T/R #CommonPartsLibrary #Zener #Diodes #SingleZenerDiodes #BZV55

Diode Zener Single 75V 2% 500mW 2-Pin Mini-MELF T/R #CommonPartsLibrary #Zener #Diodes #SingleZenerDiodes #BZV55

Diode Zener Single 4.7V 2% 500mW 2-Pin Mini-MELF T/R #CommonPartsLibrary #Zener #Diodes #SingleZenerDiodes #BZV55

Diode Zener Single 56V 2% 500mW 2-Pin Mini-MELF T/R #CommonPartsLibrary #Zener #Diodes #SingleZenerDiodes #BZV55

Diode Zener Single 43V 2% 500mW 2-Pin Mini-MELF T/R #CommonPartsLibrary #Zener #Diodes #SingleZenerDiodes #BZV55

Diode Zener Single 68V 2% 500mW 2-Pin Mini-MELF T/R #CommonPartsLibrary #Zener #Diodes #SingleZenerDiodes #BZV55

JST PH Connector Header Through Hole 2-pin 0.079" (2.00mm) battery connector JST PH 2 pin The B2B-PH-K-S is a 2-position vertical header connector with a 2.0 mm pitch, designed for mating with JST PH series crimp housings (e.g., PHR-2). It is commonly used in consumer electronics, battery connections, and small embedded systems due to its compact size and secure locking mechanism. Key Features Series: JST PH Series Number of Pins: 2 Pitch: 2.0 mm Mounting Type: Through-hole (vertical) Contact Type: Male pin header Mating Type: Friction lock (secure connection) Current Rating: ~2 A (typical, depends on wire and conditions) Voltage Rating: ~100 V Contact Material: Copper alloy (tin-plated) Housing Material: UL94V-0 rated plastic (flame-retardant) Operating Temperature: Typically -25°C to +85°C Typical Applications Battery connectors (Li-ion/LiPo packs) Power supply connections in small devices Embedded systems (e.g., Arduino, sensors) Consumer electronics (fans, LEDs, small appliances) #CommonPartsLibrary #Connector #Header #JST-PH

2 Position Wire to Board Terminal Block 45° (135°) Angle with Board 0.200" (5.08mm) Through Hole Terminal Block 2 Position 5.08mm Horizontal Screw_Terminal Screw Terminal (2-pin, 5.08 mm)

Through Hole,P=5.08mm 2 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole 2-pin 5.08mm terminal block borner

The ePaper driver board features a 24-pin FPC connector, built-in charging IC for efficient and safe battery charging, and a JST 2-pin BAT connector for easy battery connection. Ideal for creating WiFi-enabled digital photo frames.

The KPEG112 is a piezoelectric sounder / passive piezo transducer commonly used for audible signaling such as beeps, alarms, and electronic alerts. It works by converting an electrical AC signal into mechanical vibration through a piezoelectric ceramic element, producing sound. Type: Passive piezoelectric transducer (not an active buzzer) Operation: Requires an external driving signal (PWM or oscillator) Construction: Piezo ceramic disk inside a plastic housing Sound Output: Tone depends on input frequency (typically in the kHz range) Terminals: 2-pin connection (generally non-polarized) #CommonPartsLibrary #Audio-Product #Alarm #Buzzer #Siren