• Mono Audio Amp 2ZKj

    Mono Audio Amp 2ZKj

    20-W MONO CLASS-D AUDIO POWER AMPLIFIER with terminal block connector for a speaker

    chaykak2

    chaykak2

    0 Uses

    0 Comments

    0 Stars

  • Plant Care System Reference Design d3b4 beTG ef00 e207

    Plant Care System Reference Design d3b4 beTG ef00 e207

    This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

    sourav1290

    sourav1290

    0 Uses

    0 Comments

    0 Stars

  • BLE temperature sensor Reference Design vmtC

    BLE temperature sensor Reference Design vmtC

    This is a reference design of the Bluetooth Low-Energy (BLE) temperature sensor. It uses an ESP32-MINI-1 microcontroller to connect to an SHT31-DIS-B2.5KS sensor. The sensor can be powered through connector J15, and additional components provide voltage regulation and derbiaising. Temperature data can be accessed via BLE. #referenceDesign #simple-embedded #espressif #template #reference-design

    franco111

    franco111

    0 Uses

    0 Comments

    0 Stars

  • nato

    nato

    A WIP power connector interface (i.e. even smaller than mito) to make small rechargeable Lithium cells easily swappable

    debloper

    debloper

    0 Uses

    0 Comments

    0 Stars

  • raspberry-pi-2-3-4-model-b-template edbc

    raspberry-pi-2-3-4-model-b-template edbc

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    sameerwwq

    sameerwwq

    0 Uses

    0 Comments

    0 Stars

  • Raspberry Pi 2,3 and 4 Model B

    Raspberry Pi 2,3 and 4 Model B

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    jfontaine88

    jfontaine88

    0 Uses

    0 Comments

    0 Stars

  • UJA1166ATK Reference Design

    UJA1166ATK Reference Design

    This project is a reference design for a UJA1166ATK-based circuit, implementing CAN protocol interface with Wake-up, Inhibit, and Sleep functionality. CANBus have block terminal connector and surface mount test points. #referenceDesign #project #CANbus #interface #transceiverCircuit #UJA1166ATK #UJA1166ATK/0Z #referenceDesign #canbus #nxp #template #reference-design

    sidhesh

    sidhesh

    0 Uses

    0 Comments

    0 Stars

  • IDC-TH_10P-P2.54

    IDC-TH_10P-P2.54

    2.54mm Straight 2x5P 5 Push - Pull 2.54mm 2 Plugin,P=2.54mm IDC Connectors ROHS #CommonPartsLibrary #Connector #IDC #THT

    jecstronic

    jecstronic

    0 Uses

    0 Comments

    0 Stars

  • On Air R2 Demo

    On Air R2 Demo

    R2 changes: -Moving to Letter Modules for ease of design -Adding ESP32 for WiFi On/Off and intensity control -Optional: Add unpopulated AA Battery Holder for battery option R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C. #template

    acephone

    acephone

    0 Uses

    0 Comments

    0 Stars

  • Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

    babblu

    0 Uses

    0 Comments

    0 Stars

  • Plant Care System Reference Design

    Plant Care System Reference Design

    This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

    pachas

    0 Uses

    0 Comments

    0 Stars

  • TP4056 Reference Design

    TP4056 Reference Design

    Reference design for Li-ion single cell charger based on TP4056 IC. Rprog setting output current to 900mA. VIN and BAT connector are block terminal connectors. #project #Template #referenceDesign #charger #TP4056 #referenceDesign #batterycharger #template #bms #reference-design

    fabianiee

    0 Uses

    0 Comments

    0 Stars

  • QRE1113 Reference Design

    QRE1113 Reference Design

    This project is a QRE1113 opto-reflective sensor circuit, using a 47K pull-up resistor (R2) and a 100 Ohm resistor (R1). It includes a 1µF capacitor (C1) for stability and attaches to a JST connector (J1) for easy interfacing. Power is provided via VCC, with the output signal (OPTO_OUT) fed back. #referenceDesign #industrialsensing #onsemi #template #reference-design

    vasyl

    0 Uses

    0 Comments

    0 Stars

  • Plant Care System Reference Design d3b4 beTG ef00 cc33

    Plant Care System Reference Design d3b4 beTG ef00 cc33

    This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

    rydy

    0 Uses

    0 Comments

    0 Stars

  • Raspberry Pi 2 3 4 5 Model B 3tNi

    Raspberry Pi 2 3 4 5 Model B 3tNi

    Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

    babblu

    0 Uses

    0 Comments

    0 Stars

  • B5B-ZR(LF)(SN) sk3F

    B5B-ZR(LF)(SN) sk3F

    Connector Header Through Hole 5 position 0.059" (1.50mm) #commonpartslibrary #connector #jst #pinheader #tht

    akshay-shaji

    0 Uses

    0 Comments

    0 Stars

  • Safe

    Safe

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    aldojp

    0 Uses

    0 Comments

    0 Stars

  • Raspberry Pi 2,3 and 4 Model B

    Raspberry Pi 2,3 and 4 Model B

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    seshagiri

    0 Uses

    0 Comments

    0 Stars

  • Raspberry Pi 2 3 4 5 Model B aFaF

    Raspberry Pi 2 3 4 5 Model B aFaF

    Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

    porfirios

    0 Uses

    0 Comments

    0 Stars

  • Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

    nethizen

    0 Uses

    0 Comments

    0 Stars

  • Raspberry Pi 2,3 and 4 Model B

    Raspberry Pi 2,3 and 4 Model B

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    corella

    0 Uses

    0 Comments

    0 Stars

  • Plant Care System Reference Design aiaZ

    Plant Care System Reference Design aiaZ

    This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

    ghasse

    0 Uses

    0 Comments

    0 Stars

  • Raspberry Pi 2,3 and 4 Model B 2Yit

    Raspberry Pi 2,3 and 4 Model B 2Yit

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    blackboy7706

    0 Uses

    0 Comments

    0 Stars

  • Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

    arduda

    0 Uses

    0 Comments

    0 Stars

  • raspberry-pi-2-3-4-model-b-template

    raspberry-pi-2-3-4-model-b-template

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    inforno

    0 Uses

    0 Comments

    0 Stars

  • 62684-501100ALF

    62684-501100ALF

    50 Position FPC Connector Contacts, Bottom 0.020" (0.50mm) Surface Mount, Right Angle #CommonPartsLibrary #Connector #FFC #FPC #OPU #62684

    fenixsen1

    0 Uses

    0 Comments

    0 Stars

  • Plant Care System Reference Design d3b4 beTG ef00

    Plant Care System Reference Design d3b4 beTG ef00

    This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

    rydy

    0 Uses

    0 Comments

    0 Stars

  • Raspberry Pi 2 3 4 5 Model B xxMr

    Raspberry Pi 2 3 4 5 Model B xxMr

    Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

    theexcalibura3

    0 Uses

    0 Comments

    0 Stars

  • Plant Care System Reference Design d3b4 2ff9

    Plant Care System Reference Design d3b4 2ff9

    This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

    rydy

    0 Uses

    0 Comments

    0 Stars

  • TCS3200D-TR Reference Design

    TCS3200D-TR Reference Design

    This project is a TCS3200D-TR color sensor circuit utilizing resistors, capacitors, LEDs, a JST connector, and a transistor for control. The color sensor allows for precise color identification and its output is accessible through a JST connector. #industrialSensing #colorSensor #referenceDesign #osramusa #template #reference-design

    vasyl

    +

    0 Uses

    0 Comments

    0 Stars

  • Raspberry Pi 2,3 and 4 Model B

    Raspberry Pi 2,3 and 4 Model B

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    budakron

    0 Uses

    0 Comments

    0 Stars

  • Mono Audio Amp pki4 6f3b

    Mono Audio Amp pki4 6f3b

    20-W MONO CLASS-D AUDIO POWER AMPLIFIER with terminal block connector for a speaker

    saulolmedo

    0 Uses

    0 Comments

    0 Stars

  • Raspberry Pi 2,3 and 4 Model B 1LBY

    Raspberry Pi 2,3 and 4 Model B 1LBY

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    jayraj1809

    0 Uses

    0 Comments

    0 Stars

  • TP4056 Module fdTk

    TP4056 Module fdTk

    Reference design for Li-ion single cell charger based on TP4056 IC. Rprog setting output current to 900mA. VIN and BAT connector are block terminal connectors. #Template #module #referenceDesign #charger #TP4056 #reusable #module #batterycharger #sublayout

    semsoftperu

    0 Uses

    0 Comments

    0 Stars

  • Plant Care System Reference Design d3b4 beTG ef00

    Plant Care System Reference Design d3b4 beTG ef00

    This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

    sourav1290

    sourav1290

    0 Uses

    0 Comments

    0 Stars

  • TP4056 Module

    TP4056 Module

    Reference design for Li-ion single cell charger based on TP4056 IC. Rprog setting output current to 900mA. VIN and BAT connector are block terminal connectors. #Template #module #referenceDesign #charger #TP4056 #reusable #module #batterycharger #sublayout

    arbaazmd00

    0 Uses

    0 Comments

    0 Stars

  • Raspberry Pi 2,3 and 4 Model B

    Raspberry Pi 2,3 and 4 Model B

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    avishek81

    0 Uses

    0 Comments

    0 Stars

  • Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2 3 4 5 Model B

    Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

    felipewulft

    0 Uses

    0 Comments

    0 Stars

  • Plant Care System Reference Design d3b4 beTG ef00

    Plant Care System Reference Design d3b4 beTG ef00

    This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

    adarshgd

    0 Uses

    0 Comments

    0 Stars

  • Little Hardware Controller

    Little Hardware Controller

    This circuit can take an analog input, control a DC gearmotor, sense its direction and cumulative number of revolutions, and turn on and off three LEDs, in whatever way it is programmed. It can be repeatedly reprogrammed through a connector on the PCB. Powered by six AA batteries, it economizes on power by disconnecting some components when they are not in use.

    cobrecht0256

    0 Uses

    0 Comments

    0 Stars

  • raspberry-pi-2-3-4-model-b-template

    raspberry-pi-2-3-4-model-b-template

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    moffingersemi

    0 Uses

    0 Comments

    0 Stars

  • raspberry-pi-2-3-4-model-b-template

    raspberry-pi-2-3-4-model-b-template

    Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

    shibasishdalui

    +

    0 Uses

    0 Comments

    0 Stars

  • Raspberry Pi 2 3 4 5 Model B kvDn

    Raspberry Pi 2 3 4 5 Model B kvDn

    Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

    ges454654

    0 Uses

    0 Comments

    0 Stars

  • Plant Care System Reference Design kJgt

    Plant Care System Reference Design kJgt

    This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

    priyalnipunage

    0 Uses

    0 Comments

    0 Stars

  • Plant Care System Reference Design d3b4 beTG ef00 cc33 qoUV

    Plant Care System Reference Design d3b4 beTG ef00 cc33 qoUV

    This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

    timos

    0 Uses

    0 Comments

    0 Stars

  • Arduino Uno R3 Shield H Bridge

    Arduino Uno R3 Shield H Bridge

    Arduino Uno R3 shield + very basic H bridge driver and connector

    chaykak2

    chaykak2

    +

    +2

    0 Uses

    0 Comments

    0 Stars

  • Cooling Fan with Solar Panels Design

    Cooling Fan with Solar Panels Design

    This project is a reference design for a 2A Solar Panel Power Manager With 7.2V LiFePO4 Battery and 17V Peak Power Tracking based on LT3652 IC. It includes components like resistors, capacitors, LEDs, and a JST connector for power input and battery connection. The design caters to high input voltage applications and ensures efficient charging with minimal components. #project #LT3652 #ReferenceDesign #charger #BatteryManagement #solar #LiFePO4 #referenceDesign #bms #analog #template #reference-design

    lopezizaguirre

    0 Uses

    0 Comments

    0 Stars

  • PJ-044A

    PJ-044A

    Power Barrel Connector Jack 2.10mm ID (0.083"), 5.50mm OD (0.217") Through Hole #commonpartslibrary #connector #barrel #jack #Power-Connector #PJ-044

    adrian95

    8 Uses

    0 Comments

    0 Stars

  • ConnectorFilter

    ConnectorFilter

    Welcome to your new project. Imagine what you can build here.

    hamedm

    0 Uses

    22 Comments

    0 Stars

  • Connectors

    Connectors

    vasyl

    0 Uses

    1 Comment

    0 Stars