Compact type potentiometer with 9.8mm width is ideal for designing high density sets. #potentiometer #Variable-Resistor

USB Connectors USB4 GEN3, Type C, Mid mount, Center Height 0.4mm, Dual Row SMT, IP68 #CommonPartsLibrary #USB-C #USB4-gen3

PC Test Point Loop Brass Tin Plating Through Hole Mounting Type PC TEST POINT LOOP

RELAY POWER 10A 12VDC 1C PCB TYPE (JS1) 5PIN QIANJ #CommonPartsLibrary #relay

IC, PRE-AMP, MICROPHONE, DIP8; Audio Control Type: -; Supply Voltage Range: ± 5V to ± 20V; Interface #CommonPartsLibrary #IntegratedCircuit

8 Position Connector Plug, Outer Shroud Contacts Surface Mount Gold #CommonPartsLibrary #Connector #Array #Edge Type #Mezzanine (Board to Board) #Fine Pitch

A standard silicon 1.8A bridge rectifier in a through-hole mounting SIL package and with a VRRM value of 160V and 'A' type pinning. Suitable for a wide range of applications #CommonPartsLibrary #Diode #BridgeRectifier

23409011 USB Connectors USB Type C 2.0 Conn Rec Mid-Mount One Ro https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F2340901%7FA%7Fpdf%7FEnglish%7FENG_CD_2340901_A.pdf%7F2340901-1 USB Type C 2.0 Conn Rec Mid-Mount One Ro 3.36 TE Connectivity 2340901-1 571-2340901-1 https://www.mouser.co.uk/ProductDetail/TE-Connectivity/2340901-1?qs=eP2BKZSCXI7BSVkMMiSx2A%3D%3D 2340901-1 https://www.arrow.com/en/products/2340901-1/te-connectivity?region=nac

A standard silicon 1.8A bridge rectifier in a through-hole mounting SIL package and with a VRRM value of 600V and 'A' type pinning. Suitable for a wide range of applications #CommonPartsLibrary #Diode #BridgeRectifier

A standard silicon 1.8A bridge rectifier in a through-hole mounting SIL package and with a VRRM value of 1000V and 'A' type pinning. Suitable for a wide range of applications #CommonPartsLibrary #Diode #BridgeRectifier

Phases = Single / Number of Diodes = 4 / Reverse Repetitive Voltage Max. (Vrrm) kV = 1 / Forward Voltage (Vf) V = 1 / Peak Average Forward Current (If(AV)) A = 4.8 / Peak Non-Repetitive Surge Current (Itsm) A = 165 / Operating Temperature Min. °C = -50 / Operating Temperature Max. °C = 150 / Package Type = SIP / Pins = 4 / Mounting Type = Through Hole / Packaging = Tray / Peak Reverse Current uA = 5 / Peak RMS Reverse Voltage V = 500 / Reflow Temperature Max. °C = 260 #CommonPartsLibrary #Diode #BridgeRectifier

70 Position Connector Receptacle, Center Strip Contacts Surface Mount Gold It is a 70-position, surface-mount receptacle connector with a 0.4 mm pitch, intended for stacking two PCBs with a 3.0 mm mated height. The connector belongs to the DF40 series, which is optimized for miniaturized, high-speed, and reliable interconnections in space-constrained applications. Connector type: Receptacle (female), board-to-board / mezzanine Number of contacts: 70 pins (2 rows) Pitch: 0.4 mm (fine pitch, high density) Mounting: Surface Mount Technology (SMT) Stacking height: 3.0 mm Contact plating: Gold (ensures reliable conductivity and durability) Rated current: ~0.3 A per contact Rated voltage: up to 50 V AC/DC Operating temperature: approx. –55 °C to +85 °C Durability: ~30 mating cycles Compact, low-profile design for thin devices High-speed signal capability (supports interfaces like USB, MIPI, PCIe) Self-alignment feature to improve mating accuracy Strong contact force with wipe action for stable electrical connection Shock absorption and solder wicking prevention for reliability #CommonPartsLibrary #Connector #DF40

Step-down type 1 Step-down 1.25V~20V 10V~80V 300mA 100kHz SOP-8EP_150mil DC-DC Converters ROHS

Connector Header Board Edge, Through Hole, Right Angle 48 position The 0366380003 is a wire-to-board connector component from Molex, typically used in power and signal connections between wires and a printed circuit board (PCB). Type: Wire-to-board connector housing (crimp style) Positions: 3 circuits (3-pin connector) Pitch: Typically ~3.68 mm (series dependent) Mounting: Cable-side housing (mates with PCB header) Locking mechanism for secure connection #CommonPartsLibrary #Connector #Header #CMC 36638

Connector Header Surface Mount 10 position 0.050" (1.27mm) It is a 2-row, 10-position (2×5) male pin header with a 1.27 mm (0.050″) pitch, commonly used in high-density PCB designs. The connector features a surface-mount (SMT) configuration and an unshrouded design, making it suitable for applications where space is limited and flexible mating is required. Pitch: 1.27 mm (fine pitch for compact layouts) Positions: 10 contacts (dual row) Mounting Type: Surface-mount (SMT) Contact Type: Male pins (square post) Contact Material: Phosphor bronze with gold plating (good conductivity & corrosion resistance) Current Rating: ~3.4 A per contact Operating Temperature: −55 °C to +125 °C Insulator Material: LCP (high-temperature, SMT-compatible plastic) Mating Pin Length: ~3.05 mm Unshrouded header → easier alignment flexibility but no polarization protection Dual-row layout → increases connection density Cuttable strip → can be customized to shorter lengths Gold-plated contacts → improves durability for repeated mating cycles Board-to-board interconnections Embedded systems and compact electronics Industrial control and automation Telecommunications and consumer devices #CommonPartsLibrary #Connector #FTSH

10 kOhms 0.2W, 1/5W Through Hole Slide Potentiometer Top Adjustment Type #potentiometer #Variable-resistor #PSxxM

Pressure Sensor -0.07PSI ~ 0.07PSI (-0.5kPa ~ 0.5kPa) Differential Male - 0.08" (2.00mm) Tube, Dual 16b 16-SMD Module, Dual Top Ports The SDP31-500PA belongs to the SDP3x series and uses Sensirion’s CMOSens® technology to deliver accurate and stable pressure measurements. It is optimized for applications where small size, fast response, and high accuracy are critical. This sensor measures bidirectional differential pressure up to ±500 Pa, making it suitable for airflow and gas flow monitoring systems. It provides a fully calibrated, temperature-compensated digital output via I²C, simplifying integration with microcontrollers. Pressure type: Differential (±500 Pa range) High accuracy: حوالي ±3% of measured value Digital output: I²C interface with 16-bit resolution Fast response time: suitable for real-time measurements No zero-point drift: ensures long-term stability Compact size: ~8.5 × 5.5 × 5.15 mm Low voltage operation: typically 3.0–3.6 V Temperature compensated: reliable from −40°C to +85°C #CommonPartsLibrary #Sensor #SDP3x

7.2VA Power Transformer 3.3V Primary 6V Secondary Chassis Mount The DA2304-ALD is a compact surface-mount isolation power transformer manufactured by Coilcraft. It is designed primarily for low-voltage DC/DC converter applications, especially in circuits that require galvanic isolation. It is commonly used together with ICs like isolated power drivers (e.g., SN6501) to generate isolated power rails. Type: Isolation / power transformer Mounting: Surface-mount (SMT) Primary Voltage: 3.3 V Secondary Voltage: 6 V (typical) Power Rating: ~7.2 W Turns Ratio: 1 : 2.2 Isolation Voltage: up to 2500 Vrms Windings: Dual primary and dual secondary Core Material: Ferrite Operating Temp: −40°C to +125°C Isolated DC/DC converters Industrial communication interfaces (RS-485, CAN, etc.) Medical or safety-isolated systems Powering isolated gate drivers or transceivers Small footprint (~10 × 8 mm, low profile ~6 mm) #Transformer

Connector Header Through Hole 12 position 0.100" (2.54mm) pin header 1x12 2.54mm The TSW-112-07-G-S is a single-row, 12-position, 2.54 mm pitch through-hole male pin header from Samtec’s TSW series. It is designed for reliable board-to-board or wire-to-board connections in prototyping and production environments. Featuring gold-plated phosphor bronze contacts and a durable PBT housing, this connector ensures excellent electrical performance, corrosion resistance, and mechanical durability. It is commonly used in embedded systems, development boards, and general-purpose PCB interconnections. Product Type Pin Header / Pin Strip Number of Positions 12 Number of Rows 1 Pitch 2.54 mm (0.1 in) Mounting Style Through Hole Mounting Angle Straight Termination Style Solder Pin Contact Type Male Pin Contact Material Phosphor Bronze Contact Plating Gold Housing Material Polybutylene Terephthalate (PBT) Housing Color Black Flammability Rating UL 94 V-0 Current Rating 4.3 A to 6.3 A (application dependent) Voltage Rating Up to 550 VAC Packaging Bulk Country of Origin Vietnam RoHS Compliance Compliant #commonpartslibrary #connector #header

The KPEG112 is a piezoelectric sounder / passive piezo transducer commonly used for audible signaling such as beeps, alarms, and electronic alerts. It works by converting an electrical AC signal into mechanical vibration through a piezoelectric ceramic element, producing sound. Type: Passive piezoelectric transducer (not an active buzzer) Operation: Requires an external driving signal (PWM or oscillator) Construction: Piezo ceramic disk inside a plastic housing Sound Output: Tone depends on input frequency (typically in the kHz range) Terminals: 2-pin connection (generally non-polarized) #CommonPartsLibrary #Audio-Product #Alarm #Buzzer #Siren