Consumer USB-C powered environmental sensor node with Wi-Fi, BLE 5.x, digital temperature/humidity sensing, protected 5 V input, and a 3.3 V low-power MCU/sensor rail.

Carrier PCB for a 38-pin NodeMCU ESP-32S controlling a 24 V industrial RGB stack light over I2C, with 24 V power input, daisy-chain terminals, 24 V-to-5 V regulation, and jumper-selectable external/onboard opto output drivers.

Consumer USB-C powered environmental sensor node with Wi-Fi, BLE 5.x, digital temperature/humidity sensing, protected 5 V input, and a 3.3 V low-power MCU/sensor rail.

5V relay power-management schematic with ESP32-C3 control, isolated logic/power grounds, 3.3 V LDO, relay driver, sensing, and test points.

Jetson Orin NX/J4012 carrier concept with 12 V input power, 5 V and 3.3 V rails, USB 2.0 upstream connection, and a CP2108 multi-UART USB bridge for up to six UART sensor headers.

Carrier PCB for a removable 5S 18.5 V 4000 mAh LiPo-powered Raspberry Pi 400 workstation. Provides protected input, independent low-voltage cutoff, dedicated fused 5.1 V USB-C Pi output, 5 V USB-C LCD output, 12 V center-positive KVM output, cooling-fan power, and a safety-interlocked USB-C PD 5S charging path. This project remains under engineering review and is not fabrication-ready.

Consumer USB-C powered environmental sensor node with Wi-Fi, BLE 5.x, digital temperature/humidity sensing, protected 5 V input, and a 3.3 V low-power MCU/sensor rail.

Consumer USB-C powered environmental sensor node with Wi-Fi, BLE 5.x, digital temperature/humidity sensing, protected 5 V input, and a 3.3 V low-power MCU/sensor rail.

Consumer USB-C powered environmental sensor node with Wi-Fi, BLE 5.x, digital temperature/humidity sensing, protected 5 V input, and a 3.3 V low-power MCU/sensor rail.

Compact ESP32-C3-MINI single-cell Li-ion/LiPo board with MCP73831 4.2 V charger, MIC5219 3.3 V LDO, boot/reset support, charge status LED, and required test points.

ESP32-S3 controller for a large-format camera focus axis, with a socketed TMC2240 stepper driver, DVP camera, SPI display and microSD, muxed I²C expansion, USB-C, and protected 12 V/5 V/3.3 V power domains.

Consumer USB-C powered environmental sensor node with Wi-Fi, BLE 5.x, digital temperature/humidity sensing, protected 5 V input, and a 3.3 V low-power MCU/sensor rail.

Consumer USB-C powered environmental sensor node with Wi-Fi, BLE 5.x, digital temperature/humidity sensing, protected 5 V input, and a 3.3 V low-power MCU/sensor rail.

Consumer USB-C powered environmental sensor node with Wi-Fi, BLE 5.x, digital temperature/humidity sensing, protected 5 V input, and a 3.3 V low-power MCU/sensor rail.

Consumer USB-C powered environmental sensor node with Wi-Fi, BLE 5.x, digital temperature/humidity sensing, protected 5 V input, and a 3.3 V low-power MCU/sensor rail.

Single-subsystem 3.3 V synchronous buck-boost regulator reference built around the TI TPS63802DLAR in a 10-pin VSON package. The design accepts a VBUS input rail into VIN, uses a Bourns SRP4020TA-4R7M 4.7 µH power inductor between L1/L2, and generates PP3V3 from the adjustable TPS63802 output path. The TPS63802 metadata lists a 1.3 V to 5.5 V input range, 2 A output current, selectable switching-frequency modes around 1.4 MHz to 2.1 MHz, and -40 °C to +125 °C junction operation. Support circuitry includes 22 µF and 1 µF ceramic input/output capacitors, a 511 kΩ / 91 kΩ feedback divider for the PP3V3_FB node, a VBUS-derived enable divider using 93.1 kΩ and 100 kΩ resistors, MODE tied to GND, and a 100 kΩ pull-up from PP3V3 to the power-good output. Intended as a reusable compact 3.3 V buck-boost power-supply module for USB, battery, portable, IoT, or embedded sensor designs.

Consumer USB-C powered environmental sensor node with Wi-Fi, BLE 5.x, digital temperature/humidity sensing, protected 5 V input, and a 3.3 V low-power MCU/sensor rail.

Consumer USB-C powered environmental sensor node with Wi-Fi, BLE 5.x, digital temperature/humidity sensing, protected 5 V input, and a 3.3 V low-power MCU/sensor rail.

Consumer USB-C powered environmental sensor node with Wi-Fi, BLE 5.x, digital temperature/humidity sensing, protected 5 V input, and a 3.3 V low-power MCU/sensor rail.

Consumer USB-C powered environmental sensor node with Wi-Fi, BLE 5.x, digital temperature/humidity sensing, protected 5 V input, and a 3.3 V low-power MCU/sensor rail.

Disposable battery-powered EU 868 MHz long-range receiver providing a nominal 12 V, 1 A, 10 ms pulse to a horn at approximately 1 km line of sight.

Consumer USB-C powered environmental sensor node with Wi-Fi, BLE 5.x, digital temperature/humidity sensing, protected 5 V input, and a 3.3 V low-power MCU/sensor rail.

Four-phase 0.5–100 V, 0–40 A programmable CV/CC bench supply architecture. High-power AC/DC modules and contactors are modeled as off-board interfaces; the PCB schematic focuses on buck power stages, control, sensing, protection, and auxiliary rails.

Consumer USB-C powered environmental sensor node with Wi-Fi, BLE 5.x, digital temperature/humidity sensing, protected 5 V input, and a 3.3 V low-power MCU/sensor rail.

Consumer USB-C powered environmental sensor node with Wi-Fi, BLE 5.x, digital temperature/humidity sensing, protected 5 V input, and a 3.3 V low-power MCU/sensor rail.