• PCBWay 4 Layer Stackup

    PCBWay 4 Layer Stackup

    To optimize your 4-layer board manufacturing process with PCBway, utilize this comprehensive template. It incorporates a majority of the essential manufacturing constraints as global rules, ensuring a smoother and more efficient production workflow. #template #projectTemplate #manufacturerDesignRules #project-template #manufacturer-design-rules

    damiab

    damiab

    0 Uses

    0 Comments

    1 Star

  • PCB Business Card V2

    PCB Business Card V2

    Change History from V1: -13.56MHz tuning -larger instruction font -put some stuff on the back #template I wanted to create a business card that has some functionality and shows off a bit of my portfolio IRL: -NFC to my flux page -here's the [instructables](https://www.instructables.com/PCB-Business-Card-With-NFC-Make-Yours-With-NFC-QR-/) -Put a bunch of modules on it Find the BoM [here](https://www.digikey.com/short/2db2vnmp)

    samanda

    samanda

    +

    samandarshana

    0 Uses

    0 Comments

    1 Star

  • Arduino Uno R3 Shield Max485 single

    Arduino Uno R3 Shield Max485 single

    Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

    yersonrafael1997

    yersonrafael1997

    0 Uses

    0 Comments

    1 Star

  • ESP32 RC Car PCB and schema final

    ESP32 RC Car PCB and schema final

    Template for ESP32 DEV KIT V1 #template #project-template #esp32 #microcontrollers

    guyrobotics

    guyrobotics

    +

    guyhadad

    0 Uses

    0 Comments

    1 Star

  • Sendtra-0ne-B1

    Sendtra-0ne-B1

    Basic project template for RP2040 MCU from Raspberry Pi Pico Development board #RaspberryPi #Raspberry #Pi #RPi #Pico #template #project #project-template

    anmolkingk

    anmolkingk

    0 Uses

    0 Comments

    1 Star

  • SOT-23-5

    SOT-23-5

    SOT-23-5 is a small 5-pin Surface Mount Device (SMD) package with a body size of 3mm x 1.4mm and a lead pitch of 0.95mm. The package has a low profile and is commonly used for small signal transistors and diodes. #part #template

    alldaysblaze

    alldaysblaze

    0 Uses

    0 Comments

    1 Star

  • rp2040 core

    rp2040 core

    Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template #manufacturer-design-rules

    k3uchhusten

    k3uchhusten

    0 Uses

    0 Comments

    1 Star

  • Arduino

    Arduino

    Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

    beastthesharan

    beastthesharan

    0 Uses

    0 Comments

    1 Star

  • PCB Business Card V2

    PCB Business Card V2

    Change History from V1: -13.56MHz tuning -larger instruction font -put some stuff on the back #template I wanted to create a business card that has some functionality and shows off a bit of my portfolio IRL: -NFC to my flux page -here's the [instructables](https://www.instructables.com/PCB-Business-Card-With-NFC-Make-Yours-With-NFC-QR-/) -Put a bunch of modules on it Find the BoM [here](https://www.digikey.com/short/2db2vnmp)

    shanzal

    0 Uses

    0 Comments

    1 Star

  • rp2040 3.3v and 5v psu v2 2 layers

    rp2040 3.3v and 5v psu v2 2 layers

    Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template #manufacturer-design-rules

    k3uchhusten

    k3uchhusten

    0 Uses

    0 Comments

    1 Star

  • AISLER 4 Layer 0.8mm DRC

    AISLER 4 Layer 0.8mm DRC

    Use this template if you're planning to get your 4-layer board manufactured with AISLER. #project-template #template #manufacturer-design-rules

    aisler

    0 Uses

    0 Comments

    1 Star

  • GP2Y0D805Z0F Reference Design

    GP2Y0D805Z0F Reference Design

    This project is a distance detecting sensor circuit build around GP2Y0D805Z0F IC from SHARP/Socle Technology. It includes decoupling capacitors, feedback resistors, and a LED for signal indication, with power being supplied via the J1 connector. #referenceDesign #industrialsensing #sharp #template #reference-design

    mntuwentlasimiso

    0 Uses

    0 Comments

    1 Star

  • stm32 wifi kontrol 2 port

    stm32 wifi kontrol 2 port

    This is a smart blind control system reference design designed to automate the operation of window blinds. It utilizes an ESP32 microcontroller for managing control signals and an A4988 stepper motor driver to control blinds' movement. It also includes USB interfacing and LED feedback. #referenceDesign #edge-computing #edgeComputing #espressif #template #blind #DC #motor #servo #esp32 #reference-design

    microkevin

    0 Uses

    0 Comments

    1 Star

  • Photon-2-reference-design

    Photon-2-reference-design

    Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template

    nick-local

    0 Uses

    0 Comments

    1 Star

  • MyProjectManufacture

    MyProjectManufacture

    Use this template if you're planning to get your 2-layer board manufactured with AISLER. #project-template #template.

    zealatflux

    0 Uses

    0 Comments

    1 Star

  • Photon-2-reference-design fJMC

    Photon-2-reference-design fJMC

    Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template

    dhis

    0 Uses

    0 Comments

    1 Star

  • Single Lead Heart Rate Monitor - AD8232

    Single Lead Heart Rate Monitor - AD8232

    Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template

    yousi176

    0 Uses

    0 Comments

    1 Star

  • Arduino Nano RP2040 motor shield

    Arduino Nano RP2040 motor shield

    Arduino Nano(PR2040) motor shield, with two channels and A4988 driver. #template #project #shield #arduino #motor #A4988

    vasyl

    0 Uses

    0 Comments

    1 Star

  • Custom Test Platform V1

    Custom Test Platform V1

    I want to create a standard interface from my PCBs to my test equipment. My equipment: PSU: Rigol DP832 Scope: Siglent SDS 1202X-E WaveGen: Siglent SDG810 Logic Analyzer: DSLogic Plus 400MHz VNA: NanoVNA V2 6 scope channels (4 1X, 2 10X) 8 Logic Analyzer channels 1 Wavegen channel 4 Power Nets ( 2 pins each) (tie power nets to oscilloscope inputs) #template #testing

    steven876543

    0 Uses

    0 Comments

    1 Star

  • ESP32-WROOM-32UE Reference Design

    ESP32-WROOM-32UE Reference Design

    This project is a reference design for an ESP32-WROOM-32UE based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #reference-design

    mkinney

    0 Uses

    0 Comments

    1 Star

  • ESP32-MINI-1 Reference Design

    ESP32-MINI-1 Reference Design

    This project is a reference design for an ESP32-MINI-1 based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32MINI #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #reference-design #polygon

    vasy_skral

    0 Uses

    0 Comments

    1 Star

  • UNO - NRF shield

    UNO - NRF shield

    Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

    hannes2208

    0 Uses

    0 Comments

    1 Star

  • @copilot como hacer acer un detector de alcoholímetro

    @copilot como hacer acer un detector de alcoholímetro

    Use this Copilot's template to design satellite payloads, avionic systems, or space instruments, considering MIL-STD, radiation hardening, and extreme environmental constraints. Modify project requirement properties to adapt to specific needs. #template #project-template

    minusmovie185

    0 Uses

    0 Comments

    1 Star

  • GP2Y0D805Z0F Reference Design

    GP2Y0D805Z0F Reference Design

    This project is a distance detecting sensor circuit build around GP2Y0D805Z0F IC from SHARP/Socle Technology. It includes decoupling capacitors, feedback resistors, and a LED for signal indication, with power being supplied via the J1 connector. #referenceDesign #industrialsensing #sharp #template #reference-design

    vasyl

    +

    0 Uses

    0 Comments

    1 Star

  • Led 83c5

    Led 83c5

    Simulator template for an LED part. Check out the Code editor for instructions!

    86493912

    0 Uses

    0 Comments

    1 Star

  • [4-layer] Lion Circuits

    [4-layer] Lion Circuits

    Clone or fork this template if you're planning to get your 4-layer board manufactured in Lion Circuits. It has Lion Circuits [Mii Service](https://www.lioncircuits.com/faq/general/what-is-mii-service) manufacturing constraints already baked as global rules. ( #project-template #template #manufacturer-design-rules )

    jharwinbarrozo

    0 Uses

    0 Comments

    1 Star

  • a 3-DOF (Degrees of Freedom) Robotic Arm

    a 3-DOF (Degrees of Freedom) Robotic Arm

    Template for creating an Arduino MKR shield (https://www.arduino.cc/en/hardware#mkr-family) #Arduino #template #project #arduinomkr #zero

    project-baby

    0 Uses

    0 Comments

    1 Star

  • LSM9DS1TR Reference Design

    LSM9DS1TR Reference Design

    This is the LSM9DS1TR IMU reference design. This reference design has a basic I2C circuit for communication built according to the manufacturer's recommendations #IMU #LSM9DS1TR #I2C #referenceDesign #stm #template #reference-design

    vasyl

    0 Uses

    0 Comments

    1 Star

  • ISM330DLCTR Reference Design

    ISM330DLCTR Reference Design

    This is the ISM330DLCTR IMU reference design. This reference design has a basic I2C circuit for communication built according to the manufacturer's recommendations #IMU #ISM330DLCTR #I2C #referencedesing #project #template #referenceDesign #imu #stm #template #reference-design

    vasy_skral

    0 Uses

    0 Comments

    1 Star

  • Photon-2-reference-design

    Photon-2-reference-design

    Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template

    nicks-test-org

    +

    0 Uses

    0 Comments

    1 Star

  • ESP32-WROOM-32E Reference Design

    ESP32-WROOM-32E Reference Design

    This project is a reference design for an ESP32-WROOM-32E based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #reference-design

    ariasdmk

    0 Uses

    0 Comments

    1 Star

  • ADM3054BRWZ-RL7 Reference Design

    ADM3054BRWZ-RL7 Reference Design

    This ADM3054BRWZ-RL7-based reference design is a CAN bus transceiver circuit, providing reliable data communication over the CAN network. The design features a range of capacitors and resistors to ensure signal integrity, and a NUP2105L for voltage protection. It's ideal for applications requiring reliable data communication in an automotive or industrial environment. #referenceDesign #project #CANbus #interface #transceiverCircuit #ADM3054 #ADM3054BRWZ-RL7 #referenceDesign #canbus #texas-instruments #template #reference-design #reference-design

    yousi176

    0 Uses

    0 Comments

    1 Star

  • Balun Double Balanced Mixer

    Balun Double Balanced Mixer

    Diode double balanced mixer. In its simplest form it consists of two unbalanced to balanced baluns and a diode ring consisting of four diodes. #project #Template #projectTemplate

    vasy_skral

    0 Uses

    0 Comments

    1 Star

  • proyecto de dos fases

    proyecto de dos fases

    Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template

    alvaro2006

    0 Uses

    0 Comments

    1 Star

  • Single Lead Heart Rate Monitor - AD8232 j2Zz

    Single Lead Heart Rate Monitor - AD8232 j2Zz

    Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template

    tonymtz

    0 Uses

    0 Comments

    1 Star

  • ESP32-WROOM-32E Reference Design vg4Y

    ESP32-WROOM-32E Reference Design vg4Y

    This project is a reference design for an ESP32-WROOM-32E based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #reference-design

    veda2005

    0 Uses

    0 Comments

    1 Star

  • Photon-2-reference-design x8GS ac9e

    Photon-2-reference-design x8GS ac9e

    Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template

    nicks-test-org

    +

    0 Uses

    0 Comments

    1 Star

  • NRF24L01 shield

    NRF24L01 shield

    Universal shield for Nucleo-32 series STM32 boards and Arduino Nano with NRF24L01 on board #template #project #arduino #shield #nucleo

    vasyl

    0 Uses

    0 Comments

    1 Star

  • W5500 PoE Project

    W5500 PoE Project

    10/100 Base-T/TX PHY Ethernet controller that supports PoE with SPI Interface. Based on W5500. Can be used as PoE injector. #project #referenceDesign #template #w5500 #PoE #EtherNet #RJ5

    devvv

    0 Uses

    0 Comments

    1 Star

  • BMI088 Reference Design

    BMI088 Reference Design

    This is the BMI088 IMU reference design. This reference design has a basic I2C circuit for communication built according to the manufacturer's recommendations #IMU #BMI088 #I2C #referenceDesign #bosch #template #reference-design

    vasyl

    0 Uses

    0 Comments

    1 Star

  • Kitchen Assistant Reference Design

    Kitchen Assistant Reference Design

    This is a Kitchen Assistant Reference Design that runs on an ESP32 that connects to the network. The board has a microphone and bazer for communication and a display #referenceDesign #edge-computing #edgeComputing #espressif #template #esp32 #iot #i2s #reference-design

    vasyl

    0 Uses

    0 Comments

    1 Star

  • women safety device

    women safety device

    Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template #manufacturer-design-rules

    ankit9771

    0 Uses

    0 Comments

    1 Star

  • Wifi Water Level Monitor

    Wifi Water Level Monitor

    Here's a template for the popular ESP-8266EX microcontroller board, wemos D1 mini. A mini wifi board with 4MB flash based on ESP-8266EX #wemos #esp8266 #project-template #template

    jennix

    0 Uses

    0 Comments

    1 Star

  • BQ25606 Reference Design

    BQ25606 Reference Design

    This project is a reference design based on the BQ25606, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #project #BQ25606 #ReferenceDesign #charger #BatteryManagement #referenceDesign #bms #texas-instruments #template #reference-design #polygon

    vasy_skral

    +

    0 Uses

    0 Comments

    1 Star

  • Bluetooth Smart Mirror Reference Design

    Bluetooth Smart Mirror Reference Design

    This project is a Bluetooth-controlled smart mirror design. It uses an ESP32-MINI-1 for Bluetooth connectivity, an MPU-6050 IC sensor for gesture control, and a RGB LED for visual feedback. The design also comprises of other components like capacitors, resistors, and a USB-C connector for power. #referenceDesign #edge-computing #edgeComputing #template #reference-design #reusable #module #edge-computing #edgeComputing #sublayout #esp32 #lazer #sensor

    vasyl

    0 Uses

    0 Comments

    1 Star

  • monesh nano

    monesh nano

    Template for creating an Arduino MKR shield (https://www.arduino.cc/en/hardware#mkr-family) #Arduino #template #project #arduinomkr #zero

    monesh1010

    0 Uses

    0 Comments

    1 Star

  • Seeed Studio 6-Layer Stackup

    Seeed Studio 6-Layer Stackup

    To optimize your 6-layer board manufacturing process with Seeed Studio Fusion, utilize this comprehensive template. It incorporates a majority of the essential manufacturing constraints as global rules, ensuring a smoother and more efficient production workflow. #project-template #template #manufacturer-design-rules

    rohanjiofsdgl

    0 Uses

    0 Comments

    1 Star

  • Audio Electronics | Copilot Preset

    Audio Electronics | Copilot Preset

    Use this Copilot's template to design audio applications like amplifiers, mixers, processors, etc. Modify project requiremenproperties to adapt to specific needs. #template #project-template

    gg0908gabriel

    0 Uses

    0 Comments

    1 Star

  • Control Servomotor con finales de carrera

    Control Servomotor con finales de carrera

    Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

    juankrousth

    0 Uses

    0 Comments

    1 Star

  • LTC3406 Reference Design

    LTC3406 Reference Design

    This is a reference design of a buck converter based on LTC3406 with 1.2V 0.6A output #referenceDesign #powermanagement #analogdevices #template #reference-design #polygon

    vasyl

    0 Uses

    0 Comments

    1 Star