BLDC Motor Driver Design Inquiry

Worked

0:23

Started: Connect pull-up resistors for interfaces: create nets and add connections for: • 3V3: C3:P1, R1:P1, R2:P1 • I2C_SCL: R1:P2, U2:SCL, U9:SCL, U10:SCL, U1:SCL • I2C_SDA: R2:P2, U2:SDA, U9:SDA, U10:SDA, U1:SDA • BUS: C1:P1, R3:P1, R4:P1, R5:P1 • U4_EN1: R3:P2, U4:EN1 • U4_EN2: R4:P2, U4:EN2 • U5_EN: R5:P2, U5:EN.

Updated 7 nets

0:09

Connected C3:P1, R1:P1, R2:P1

Connected R1:P2, U2:SCL, U9:SCL, U10:SCL, U1:SCL

Connected R2:P2, U2:SDA, U9:SDA, U10:SDA, U1:SDA

Connected C1:P1, R3:P1, R4:P1, R5:P1

Connected R3:P2 to U4:EN1

Connected R4:P2 to U4:EN2

Connected R5:P2 to U5:EN

Worked

0:15

Started: Add inductors for DC/DC stages..

Added 2 components

0:04

Added 2x Generic Inductor as L1, L2

Working...

250d 7:35:35

Started: Add oscillators if an external clock is required....

Worked

2:31

Started: Add high-speed (32 MHz) and low-speed (32.768 kHz) crystals with appropriate load capacitors for the MCU..
Reading schematic for U2.
Search [[object Object]](https://www.flux.ai/search?q=%5Bobject%20Object%5D&type=components).
Search complete.
Search [[object Object]](https://www.flux.ai/search?q=%5Bobject%20Object%5D&type=components).
Search complete.

Added 6 components

0:04

Added 1x NX1612SA-32MHZ-STD-CIS-3 as Y1

Added 1x ABS07-32.768KHZ-T as Y2

Added 4x Generic Capacitor as C4, C5, C6, C7

Worked

1:36

Started: Select and add connectors: USB-C, motor, encoder, I/O, and test points..
Search 5 components.
Search complete.

Added 8 components

0:07

Added 4x 5019 as TP1, TP2, TP3, TP4

Added 1x USB-C 2.0 Receptacle as J1

Added 1x DB126V-5.0-3P-GN as J2

Added 1x 0901301106 as J3

Added 1x 2x5 Pin Shrouded Header as J4

Worked

1:17

Started: Connect all nets: power rails to regulators, decoupling capacitors to their respective IC power pins, enable pins to their resistors, and all control and debug signal pins together by creating the necessary connections between component pins..
Read schematic.

Updated 7 nets

0:08

Connected U4:VIN, U5:IN, C1:P1

Connected U5:VCC to C2:P1

Connected U2:VDD to C3:P1

Connected U4:EN1 to R3:P1

Connected U4:EN2 to R4:P1

Connected U5:EN to R5:P1

Connected GND:GND, U4:GND, U5:GND, C1:P2, C2:P2, C3:P2, R3:P2, R4:P2, R5:P2

Working...

250d 7:28:35

Started: Review schematic completeness and add any missing components or nets....

Reading the design...

Sign up to send
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    16.2k
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M
  • 1070TR
    1070TR
    Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
    jharwinbarrozo
    700.5k

Upset Jade Teleporter

Upset Jade Teleporter thumbnail
High-Precision BLDC FOC Motor Driver Board

Properties

100 x 80

mm

20

mm

graph LR PowerInput[Power Input 12-48V] -->|DC| BusCap[Bus Capacitor] BusCap --> FETs[Power MOSFET Bridge] MCU[MCU (Cortex-M)] -->|PWM| GateDrive[Gate Driver IC] GateDrive --> FETs FETs --> Motor[BLDC Motor] FETs -->|Sense| CS[Current Sense Amplifier] CS --> MCU MCU -->|UART| Host[Host Interface] MCU -->|I2C| Hall[Hall Sensor Interface] Hall --> MotorSensor[Hall Sensors] MCU -->|ADC| VoltageDiv[Bus Voltage Sensing]

Hall

Industrial/Manufacturing

48

V

5–12 V

3.3

V

60

V

-40 to 85

°C

20

A

High-Precision BLDC FOC Motor Driver Board

10000

RPM

12-48

V

40

A

Pricing & Availability

Distributor

Qty 1

Arrow

$3.70–$8.00

Digi-Key

$4.20–$9.65

LCSC

$5.73

Mouser

$8.10

TME

$0.78

Verical

$6.33–$8.76

Controls