Part Datasheet Audit
Worked for 16 sec
Thought for 6 sec
Referenced guidance.
Created 5 tasks.
1/5 Inventory unique part types and existing metadata
Inventory unique part types and existing metadata
Find official datasheets and populate missing Datasheet properties
Cross-check symbols, footprints, pin counts, and pin descriptions
Create audit report with key specs and mismatches
Verify updates and unresolved issues
Thought for a moment
Thought for 9 sec
I’ll inspect the schematic and current design-review results, then create a concise board integrity-check document covering connectivity, power, parts, interfaces, and PCB validation.
Worked for 4 mins 4 sec
Created a project doc
Board Integrity Check Plan
Project: Open-Smartwatch-Light ksAk Document purpose: Assembly inspection, electrical integrity verification, first-power bring-up, and func...
The integrity-check plan is created. I’m doing a final readback and checking that the documented ERC/DRC blockers match the live project.
Worked for 1 min 28 sec
Created and verified the Board Integrity Check Plan. It covers pre-power inspection, continuity and staged power-up, subsystem tests, pass/fail records, and current ERC/DRC blockers—including five airwires, five dangling traces, two power-pin errors, and 28 missing MPNs.
Fix checks and audit
Fix ERC/DRC blockers
Complete datasheet audit
Resolve missing MPNs
Review power architecture
