Robotic Arm Control Board Design

Working...

207d 8:2:21

Started: Add the main MPU: STM32MP257FAI3 (U1)

Searching for a component.

Searching.

Finished searching for a component.

207 days

Working...

207d 8:1:08

Started: Add compute and memory components: STM32MP257FAI3 (U1), W25Q128JVSIQ (U2), MT41K256M16TW-107 (U3) to the project

207 days

Working...

207d 8:0:33

Started: Add compute and memory components: STM32MP257FAI3 (U1), W25Q128JVSIQ (U2), MT41K256M16TW-107 (U3) to the project

207 days

Working...

207d 7:59:55

Started: Add compute component: STM32MP257FAI3 (U1) to the project

Finished searching for a component.

207 days

Working...

207d 7:58:31

Started: Connect MPU boot-strap pins, reset, and memory interface nets (QSPI flash and DDR3L signals) with appropriate pull-ups/pull-downs or headers

207 days

Worked

0:42

Started: Add and connect generic pull-up and pull-down resistors for U1 bootstrap pins (BOOT0, VBOOT0, VBOOT1) to the correct nets (VDD and GND) per the MCU datasheet

207 days

Applied changes.

0:31

207 days

Worked

0:52

Started: Add and connect generic pull-up and pull-down resistors for U1 (STM32MP257FAI3) bootstrap pins (BOOT0, VBOOT0, VBOOT1) to the 3.3 V and GND nets per the MCU datasheet

207 days

Changing components...

207d 7:55:11

207 days

Stopped due to a problem. Please try again.


U3
U16 P0_3 - U1 PA3
J3 D+ - U1 USBH_HS_DP
U4 IOGND - U5 VSS
U4 IOGND - U5 VSS
U16 P0_2 - U1 PA2
L1 P2 - C1 P1
U5 VB - U7 VS
U4 TD- - U1 COMBOPHY_TX1N
U4 IOGND - U5 VSS
U7 SW - L1 P1
U4 IOGND - U5 VSS
J3 CC2 - U12 CC2
C9 P2 - C11 P2
U4 IOGND - U5 VSS
L1 P2 - C1 P1
U1 OSC32_IN - X2 P1
L1 P2 - C1 P1
U7 SW - L1 P1
U4 IOGND - U5 VSS
U4 IOGND - U5 VSS
U3 VSSQ_6 - U4 AGND
U4 RD- - U1 COMBOPHY_RX1N
U4 TD+ - U1 COMBOPHY_TX1P
U4 IOGND - U5 VSS
U3 VSSQ_6 - U4 AGND
U4 IOGND - U5 VSS
C9 P2 - C11 P2
U4 IOGND - U5 VSS
U4 IOGND - U5 VSS
U1 VSS_42 - U1 VSS_43
U4 RD+ - U1 COMBOPHY_RX1P
U4 IOGND - U5 VSS
L1 P2 - C1 P1
J3 D- - U1 USBH_HS_DM
U8 VOUT - U16 DVDD1
L1 P2 - C1 P1
L1
Inductance
Inductance
C11
Capacitance
Capacitance
U7
R6
Resistance
500 Ω
C13
Capacitance
Capacitance
C7
Capacitance
Capacitance
R4
Resistance
500 Ω
C6
Capacitance
Capacitance
C2
Capacitance
Capacitance
C12
Capacitance
Capacitance
C9
Capacitance
Capacitance
C17
Capacitance
100 nF
C10
Capacitance
Capacitance
R2
Resistance
500 Ω
R8
Resistance
500 Ω
C8
Capacitance
Capacitance
R10
Resistance
500 Ω
R7
Resistance
500 Ω
C14
Capacitance
100 nF
C15
Capacitance
100 nF
R9
Resistance
500 Ω
R1
Resistance
500 Ω
C4
Capacitance
Capacitance
C16
Capacitance
100 nF
R5
Resistance
500 Ω
R11
Resistance
500 Ω
C5
Capacitance
Capacitance
R3
Resistance
500 Ω
C3
Capacitance
Capacitance
C1
Capacitance
Capacitance
J3
U4
U6
J2
X1
GND
GND
GND
GND
GND
GND
GND
GND
GND
X2
U5
U11
U8
U12


  • Ground
    A common return path for electric current. Commonly known as ground.
  • Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
  • Power Net Portal
    Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
  • Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
  • Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
  • Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
  • RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
  • 875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
  • CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)

Kitchen Independence - Robotic Arm

Kitchen Independence - Robotic Arm thumbnail
Kitchen Independence – Robotic Arm Vision & Control Board v1

Properties

12

Gbps

Industrial/Manufacturing

Footprint only

24, 5, 3.3, 2.8, 2.3, 1.8

V

Ethernet, USB, Zigbee

Enabled

Power-over-Ethernet, 24V DC input, USB (footprint only)

802.3af

The system comprises the following functional blocks: • 24 V input protection and passthrough for motor drivers, including reverse-polarity and overcurrent protection. • PoE PD front end with an ideal-diode OR network combining Power-over-Ethernet and a buck-converter 5 V source. • Regulated 5 V and 3.3 V digital power rails for onboard logic. • Analog camera power subsystem with LDO regulators providing 2.8 V, 1.8 V, and 2.3 V rails. • Main MCU block featuring dual MIPI CSI-2 camera interfaces, external QSPI Flash and SDRAM, Ethernet MAC, and USB OTG. • Zigbee radio module interface with required level shifting and antenna connection. • Safety circuitry including an emergency-stop input, brownout voltage supervisor, and watchdog timer.

24V input protection and passthrough, PoE ideal diode-OR power input, 5V buck, 3.3V/analog LDOs, MCU with MIPI CSI-2/Ethernet/USB, QSPI Flash/DDR3L, Zigbee radio, emergency stop, brownout/WD supervisors

4

4

Pricing & Availability

Distributor

Qty 1

Arrow

$35.84–$39.07

Digi-Key

$15.87–$18.18

LCSC

$16.39–$16.62

Mouser

$59.35

TME

$1.54

Verical

$30.18–$47.60

Controls