Schematic for BLDC Motor controller (FOC): Compact Dual-Motor BLDC...

Compact BLDC Driver Design

Worked

1:46

Autopilot

Calculator

Started: Compute minimum trace widths for the 5 V (0.05 A) and 3.3 V (0.025 A) rails over 150 mm with ≤50 mV drop using the calculator tool and record each result.

Using Calculator Tool.

Using Calculator Tool.

Using Calculator Tool.

Using Calculator Tool.

113 days

Updated 2 document properties

0:07

Updated 2 document properties

113 days

Worked

0:20

Autopilot

Started: Create net classes “5V” and “3.3V” in the project and set their minimum trace widths to the corresponding computed values.

113 days

Applied changes.

0:07

113 days

Worked

0:09

Autopilot

Started: Run AutoLayout for optimal component placement focusing on minimizing high-current loop areas and isolating RF-sensitive circuitry.

113 days

Worked

0:23

Autopilot

Started: Start an autolayout job that routes components on the PCB focusing on minimizing high-current loop areas and isolating RF-sensitive circuitry.

113 days

Applied changes.

0:04

113 days

Worked

0:11

Autopilot

Started: Start an autolayout job that places components on the PCB focusing on minimizing high-current loop areas and isolating RF-sensitive circuitry.

113 days

Worked

0:29

Autopilot

Started: Start an autolayout placement-only job that places components on the PCB, prioritizing the “Phase” net class to minimize high-current loop areas and isolating RF-sensitive circuitry around the BLE antenna and signal nets.

113 days

Applied changes.

0:05

113 days

Worked

0:12

Autopilot

Started: Run AutoLayout for routing all nets according to defined layout rules.

113 days

Worked

0:29

Autopilot

Started: Start an autolayout routing job to route all nets on the PCB according to the defined layout rules.

113 days

Applied changes.

0:09

113 days

Worked

1:47

Autopilot

Review (ERC/DRC)

Started: Run DRC and system-level reviews to identify airwires, floating copper, and missing footprints.

Using Review (ERC/DRC) Tool.

Using Review (ERC/DRC) Tool.

Using Review (ERC/DRC) Tool.

Using Review (ERC/DRC) Tool.

Using Review (ERC/DRC) Tool.

Using Review (ERC/DRC) Tool.

Using Review (ERC/DRC) Tool.

Using Review (ERC/DRC) Tool.

Using Review (ERC/DRC) Tool.

113 days

Worked

1:29

Autopilot (advanced)

Message

Review (ERC/DRC)

Started: Use @review with reviewTypes: ["design_rule_check_airwires","design_rule_check_floating_copper","design_rule_check_missing_footprints"]; document any violations or unresolved airwires, floating copper areas, or missing footprints.

Using Review (ERC/DRC) Tool.

Using Review (ERC/DRC) Tool.

113 days

is thinking...

113d 19:56:44

The response is taking longer than expected. Please try again with a more focused question.

113 days

Changing project description...

113d 19:56:22

113 days

Stopped due to a problem. Please try again.

Sign up to send

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

U5

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

U1 GND - J1 GND_A

L1

Inductance

Inductance

J1 VBUS_A - J1 VBUS_B

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

U1 CC2 - J1 CC2

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

U1 CC1 - J1 CC1

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

L2

Inductance

Inductance

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25

Capacitance

Capacitance

U7

U2

U3

U8

U6

U4

U1

U4

U5

U1

Reviews

Electrical Rule Checks

Missing Footprints

Reports parts that have no footprint.

Design Rule Checks

Overlapping Copper • 33

	Des	Net	Des	Net	...
	Trace 5d3c	Net 1	J1:GND_A	GND
	Trace 5d3c	Net 1	J1:SHIELD	Net 4
	Trace 5d3c	Net 1	J1:DN1	None
	Trace 5d3c	Net 1	J1:DN1	None
	Trace 5d3c	Net 1	J1:DP2	None
	Trace 5d3c	Net 1	J1:SBU1	None
	Trace 5d3c	Net 1	J1:SBU1	None
	U12:GND	Net 1	U5:～	None
	U12:P2	Net 1	J1:CC2	CC2
	U12:P2	Net 1	J1:VBUS_B	VBUS_IN
	U12:P2	Net 1	J1:DP2	None
	Via	Net 1	J1:DN1	None
	Via	Net 1	J1:DP1	None
	Trace 5d3c	Net 2	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25:P1	None
	U12:VIN	Net 2	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25:P1	None
	U12:VIN	Net 2	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25:P2	None
	U12:VIN	Net 2	U5:GND	None
	Trace 5d3c	Net 3	J1:SHIELD	Net 4
	Trace 5d3c	Net (U1 - FB)	J1:VBUS_A	VBUS_IN
	Trace 5d3c	Net (U1 - FB)	J1:VBUS_B	VBUS_IN
	U12:P1	Net (U1 - FB)	J1:VBUS_B	VBUS_IN
	U12:P1	Net (U1 - FB)	J1:DN2	None
	U12:P1	Net (U1 - FB)	J1:SBU2	None
	U12:P1	Net (U1 - FB)	J1:SSRXN1	None
	U12:P2	Net (U1 - L2)	Trace 5d3c	Net 3
	Q2:DRAIN	None	U1:CC2	CC2
	U1:bee23cd2	None	U1:GND	GND
	U1:bee23cd2	None	U1:GND	GND
	U1:bee23cd2	None	U1:GND	GND
	U1:bee23cd2	None	U1:GND	GND
	U2:OUTA	None	Trace 5d3c	Net 3
	U2:OUTA	None	Trace 5d3c	Net 3
	U2:OUTA	None	U12:VOUT	Net 3

Invalid Layer

Reports nodes that are assigned to a layer that doesn't exist in the layout stackup.

Component Overrides

Reports components that have been modified using the "!important" flag.

Airwires

Reports missing routed traces between pads in a net.

Deprecated Rules

Reports nodes that are using rules that are not supported anymore.

Layers with Multiple Fills • 1

	Layer	Net
	All	GND, GND

Floating Copper

Detect any via, trace or copper fill island that is not connected to any net.

Protected Intrusions

Reports intrusions from objects of other nets into polygons or fills that have the Protected layout rule applied.

Manufacturing

Manufacturer Part Number • 48

	Designator	MPN
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25	None
	H1, H2	None
	H1, H2	None
	L1	None
	L2	None
	R5	None
	R6	None
	R7	None
	R8	None
	R9	None
	R10	None
	R11, R12	None
	R11, R12	None
	R13, R14, R15, R16, R17, R18	None
	R13, R14, R15, R16, R17, R18	None
	R13, R14, R15, R16, R17, R18	None
	R13, R14, R15, R16, R17, R18	None
	R13, R14, R15, R16, R17, R18	None
	R13, R14, R15, R16, R17, R18	None
	R19	None
	R20	None
	R21	None
	R22	None
	R23	None

Parts Available

Beta

Checks that all parts have a part number and are available from distributors.

System Checks

Auto-Layout

Beta

Reports issues with Auto-Layout if Flux cannot route something or must ignore a configuration.

Passive Components

Resistor Power Rating

Beta

Checks that the power traveling across a given resistor is under its rating with 50% headroom.

Pull Up/Pull Down Presence

Beta

Checks that IC pins that require pull up or pull down resistors have them.

Capacitor Voltage Rating

Beta

Checks that capacitors have appropriate voltage ratings to prevent overheating and ensure reliable circuit operation.

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
jharwinbarrozo
15.1k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M

Inspect

BLDC Motor controller (FOC)

BLDC Motor controller (FOC)

Controls

Properties

Power Budget: PD sink controller (U1 STUSB4500QTR)

Current = 0.005 A, Power = 0.06 W

Maximum Allowable Trace Resistance

0.005 Ω

Minimum Copper Trace Width

14.78 mm

Power Budget: Gate drivers (U2, U14 MCF8316A1VRGFR on 12 V)

Current = 0.040 A, Power = 0.48 W

Minimum Trace Width 3.3V (150 mm, ≤50 mV drop)

0.036 mm

System Architecture

```mermaid graph TD USB-C_PD_Sink["USB-C PD Sink"] --> TwelveV["12 V Rail"] TwelveV --> Buck12to5["Buck Converter → 5 V Rail"] TwelveV --> Buck12to3v3["Buck Converter → 3.3 V Rail"] ThreePhase1["3-Phase Bridge A"] -- Shunt Sense & Hall Inputs --> FOC_MCU["FOC MCU"] ThreePhase2["3-Phase Bridge B"] -- Shunt Sense & Hall Inputs --> FOC_MCU BLE_Module["BLE Module"] -->|3.3 V| ThreePointThreeV["3.3 V Rail"] Connectors["Connectors"] Buck12to5 --> BLE_Module FOC_MCU --> Connectors BLE_Module --> Connectors ```

Minimum Trace Width 5V (150 mm, ≤50 mV drop)

0.072 mm

Power Budget: MCU (U4 STM32G4A1KEUx at 3.3 V)

Current = 0.025 A, Power = 0.083 W

Power Budget: BLE module (U5 MDBT50Q-U1MV2 at 3.3 V)

Current = 0.030 A, Power = 0.099 W

Power Budget: 12 V → 5 V buck converter (U12 TPS63070)

Current = 0.050 A, Power = 0.60 W

Power Budget: 12 V → 3.3 V buck converter (U13 TLV62568DDC)

Current = 0.020 A, Power = 0.24 W

Power Budget: Sense amplifiers (U3–U8 INA240A1D at 5 V)

Current = 0.006 A, Power = 0.030 W

Minimum Copper Trace Width

2.9 mm

Availability & Pricing

Distributor		Qty 1
	LCSC	$0.06

Assets

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.