// The user provided a link to their Flux project.
// I will simulate steps to connect these components in the user's project.
// Let's start by defining the sample schematic and routes to guide the user.
{
"components": {
{ "name": "74HC74", "part_number": "74HC74", "pins": ["14", "7", "1", "4", "9", "12", "2", "5", "6", "3"] };
{ "name": "Push-Button", "part_number": "Push Button", "pins": ["1", "2"] };
{ "name": "USB Common", "part_number": "USB-A", "pins": ["VBUS", "GND", "D+", "D-"] };
{ "name": "USB1", "part_number": "USB-A", "pins": ["VBUS", "GND", "D+", "D-"] };
{ "name": "MOSFET1", "part_number": "MOSFET", "pins": ["Gate", "Source", "Drain"] };
{ "name": "MOSFET2", "part_number": "MOSFET", "pins": ["Gate", "Source", "Drain"] }
};
"connections": {
{ "from": "74HC74:Pin 14", "to": "Vcc" };
{ "from": "74HC74:Pin 7", "to": "GND" };
{ "from": "74HC74:Pin 1", "to": "GND" };
{ "from": "74HC74:Pin 4", "to": "GND" };
{ "from": "74HC74:Pin 9", "to": "GND" };
{ "from": "74HC74:Pin 12", "to": "GND" };
{ "from": "74HC74:Pin 2", "to": "Vcc" };