ESP32‑S3 Blink Uygulaması

flux

0:00

Here’s a summary of what was accomplished:
Work completed
  • Project description updated to “Minimal ESP32-S3 USB-C Powered Blink-LED Development Board with Onboard 3.3 V LDO.”
  • System Architecture property added with the mermaid block-flow diagram.
  • Project properties set:
    • Power Input Option = “USB-C only”
    • ESP32 Module = “ESP32-S3-WROOM-1”
    • LED Configuration = “Green LED on GPIO2”
  • Major ICs placed:
    • J1 USB-C connector (U262-161N-4BVC11)
    • U1 TPS76933DBVT 3.3 V LDO
    • U2 ESP32-S3-WROOM-1 module
  • Passive and reset components added:
  • All nets routed:
    • USB-C 5 V ➔ LDO input & input caps
    • LDO output ➔ 3.3 V rail & output caps
    • GND tied across all components
    • EN/BOOT pull-ups and buttons wired
    • USB_DP/USB_DM to ESP32 programming pins
    • GPIO2 ➔ R3 ➔ D6 ➔ GND
  • ERC issues addressed (added decoupling caps and pull-ups) and BOM enriched with part numbers.
Unresolved tasks None — all plan items are complete.
Success criteria review
  • ✅ USB-C 5 V input regulated to 3.3 V with proper decoupling
  • ✅ EN/BOOT strapping and reset pushbuttons functional for programming
  • ✅ Status LED circuit on GPIO2 with series resistor
  • ✅ ERC and BOM checks completed
Next recommended step Prepare for PCB layout: review footprints, configure the stackup, and select a board mounting solution so we can place and auto-route components.
142 days
Sign up to send
y como seria el codigo
Someone is typing...
16
Debugging & Testing Arduino used for the blood glucose meter: https://youtu.be/...
Someone is typing...
14
All the below mentioned electrodes are present on ONE ULTRA TOUCH strip connecto...
Someone is typing...
2
explain this project.
Someone is typing...
15
explain this project.
Someone is typing...
19
Generate a markdown-formatted table to compare C10, +2V5, +5V, ADC 1, OUT/IN1, +...
Someone is typing...
18
list all ICs and the decoupling capacitors attached to each. Ensure to include a...
Someone is typing...
17
C10
Capacitance
1 F
+2V5
ADC 1
OUT/IN1
R2 P2 - U2 IO0
IN/OUT1
C7
Capacitance
1 F
Working electrode
U2 IO2 - R3 P1
C14
Capacitance
100 F
GND GND - U1 GND
U1 OUT - C2 P1
STRIP_DETECT
C13
Capacitance
10 F
ADC 0
GND GND - U1 GND
D5
J1 DP1 - J1 DP2
IN/OUT1
+2V5
ADC 0
ADC 1
J1 DN1 - J1 DN2
OUT/IN1
+2V1
+2V1
C9
Capacitance
10 F
+2V5
Working electrode
C10
Capacitance
10 F
+5V
+5V
C14
Capacitance
47 F
D6
C12
Capacitance
0.1 F
Ultra touch Strip Connector
LMC6484 IC_D
R8
Resistance
500 Ω
+5V
R10
Resistance
500 Ω
R11
Resistance
500 Ω
R12
Resistance
500 Ω
+5V
+5V
+5V
1500
Resistance
500 Ω
+5V
C15
Capacitance
0.1 F
+5V
R9
Resistance
500 Ω
J1
LMC6484 IC_C
LMC6484_ICA
5V Li ion battery
LMC6484 IC_B
GND
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • Power Net Portal
    Power Net Portal
    Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
    jharwinbarrozo
    11.4M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    15.8k
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M

Arduino blood glucose meter shield

Minimal ESP32-S3 USB‑C Powered Blink-LED Development Board with Onboard 3.3 V LDO

Properties

hackaday.io/project/11719-open-source-arduino-blood-glucose-meter-shield

USB-C only

USB

Arduino

ESP32-S3-WROOM-1

WiFi

Minimal ESP32-S3 USB‑C powered blink-LED development board with onboard 3.3 V LDO, adapted from an earlier Arduino blood glucose meter shield project.

Green LED on GPIO2

flowchart TD USB_C["USB-C Connector"] LDO["3.3V LDO Regulator"] V33["3.3V Rail"] ESP32["ESP32-S3 Module"] LED["Status LED"] USB_C --> LDO LDO --> V33 V33 --> ESP32 ESP32 --> LED

3.3

V

Medical

Pricing & Availability

Distributor

Qty 1

Arrow

$28.48

Digi-Key

$31.99–$34.48

LCSC

$85.58

Mouser

$6.46

TME

$1.95

Verical

$27.96

Controls

New control