I’m blocked from making project changes because this account currently has no available ACUs, so AI execution features are unavailable.

Nothing has been modified yet: the project is still empty with 0 components and 0 nets. Remaining work is to create the USB-C powered Wi‑Fi/BLE temperature/humidity sensor schematic, select the MCU/module and digital T/RH sensor, design the protected 5 V input and 3.3 V power rail, add documentation for consumer/regulatory considerations, then verify ERC and prepare layout constraints.

I’ll create a 5 V Omron G2RL relay driver board using an MMBT2222A low-side transistor, add the required coil flyback protection and connectors, then run a schematic check.

I found a 5 V Omron G2RL variant in the library plus the requested MMBT2222A; I’m adding a 5 V/control input, relay contact terminal, base resistor, base pulldown, and flyback diode now.

Processing was stopped.

Here's a summary of what I was working on:
Inspecting pin details

I'm thinking I need to infer the G2RL-1A pin connections. There are coil pins—maybe 1 and 8? And for the contacts, it seems like 3 could be COM, while maybe 4 is NO, but I’m uncertain about pin 6. I want to check the pin descriptions to be sure about all of this, so I’ll take a closer look. It’s important to get these details right to avoid any mistakes!