Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain project
Write a project description
Find schematic issues
Create a test plan
Simulate a circuit
Prepare for Manufacturing
Component Selection Workflow
New Subsystem Wizard
Sign up to send
give me the schematic of a wirelees charger receiver
moetaz1

moetaz1

give me the schematic now with the best component with 9 volts and 2 ampers
2y
moetaz1

moetaz1

@copilot give me the schematic of a wirelees charger receiver
2y

copilot

Creating a schematic for a wireless charger receiver involves several key components and connections to capture the energy from the wireless charging transmitter and convert it to a form that can power or charge your device. Below is a simplified version of such a schematic. For this explanation, I'll assume we're designing a receiver for a standard Qi wireless charging system, which is common for smartphones and other small electronics. The main components include:
  1. Wireless Charging Receiver Coil (L1): This coil captures the alternating magnetic field from the charging pad.
  2. Rectifier Diode Bridge (D1, D2, D3, D4): Converts the AC signal induced in L1 into a DC signal.
  3. Capacitor (C1): Smooths out the DC signal after the rectifier bridge.
  4. Voltage Regulator (U1): Ensures a stable output voltage suitable for charging the battery or powering the device directly.
Assumptions:
  • The voltage regulator is set for 5V output, which is typical for many small electronics.
  • Typical diodes and capacitors are chosen for handling the power requirements of wireless charging at this scale.
Here are the connections you would make:
  • Capture and Rectify the Power:
    • Connect L1:1 to D1:Anode, D2:Cathode.
    • Connect L1:2 to D3:Anode, D4:Cathode.
    • Connect D1:Cathode, D3:Cathode to C1:+.
    • Connect D2:Anode, D4:Anode to C1:-.
  • Regulate the Voltage:
    • Connect C1:+ to U1:Vin.
    • Connect C1:- to U1:GND.
    • The stabilized output from U1:Vout is your positive supply for charging or powering your device.
  • Capacitor for Voltage Stabilization:
    • A capacitor (C2) might be added in parallel with the output for additional voltage stabilization and noise reduction. Connect C2:+ to U1:Vout and C2:- to U1:GND.
Note: The values for L1 (inductance), C1, C2 (capacitance), and the diodes (D1-D4) depend on the specific power requirements of the device being charged and the specifications of the wireless charging system (e.g., charging distance, charging power). For a standard smartphone charging application, L1 might typically be in the range of a few microhenries, while C1 and C2 might be in the range of a few microfarads to tens of microfarads, with voltage ratings depending on the expected input from the rectifier. Diodes should be chosen to handle the rectified current without significant voltage drop.
Remember, this is a simplified overview. Implementing a functional wireless charging system may require additional components and considerations, such as overvoltage and overcurrent protection, efficiency optimization, and thermal management, especially for higher power applications.
2y
moetaz1

moetaz1

give me the schematic now with the best component with 9 volts and 2 ampers
2y

copilot

To design a wireless charger receiver that outputs 9V and 2A, we'll upgrade the previous schematic with components that can handle the increased power requirement safely and efficiently. Given the output requirements, our rectified and regulated output must provide stable 9V at up to 2A, which means ensuring the chosen components can comfortably handle these specifications.
Updated Schematic Components:
  • L1 (Receiver Coil): We continue using L1 for capturing the magnetic field. Inductance might be adjusted for optimization with the transmitter, but let’s keep using your existing 2.2μH inductor for this example.
  • Rectifier Diode Bridge (D1, D2, D3, D4): High-current Schottky diodes are chosen for low forward voltage drop and efficient rectification at higher currents. For instance, diodes capable of handling at least 3A continuous current and reverse voltages greater than the rectified voltage, say 20V or more, to provide margin.
  • Capacitor (C1): A higher value and voltage rating capacitor to smooth the DC signal further. Opt for a capacitance of around 220μF to 1000μF rated at least at 16V for better smoothing and handling transient loads.
  • Voltage Regulator (U1): A buck converter capable of stepping down the voltage to a stable 9V output with an efficiency suitable for 2A load. Look for a module or IC with an input range accommodating the rectified voltage and capable of delivering at least 2A, such as the LM2596, which is widely used and can handle up to 3A.
Connections:
  • Capture and Rectify the Power:
    • Connect L1:1 to D1:Anode, D2:Cathode.
    • Connect L1:2 to D3:Anode, D4:Cathode.
    • Connect D1:Cathode, D3:Cathode to C1:+.
    • Connect D2:Anode, D4:Anode to C1:-.
  • Regulate the Voltage:
    • Connect C1:+ to U1:Vin.
    • Connect C1:- to U1:GND.
    • Connect U1:Vout to your output connector positive, and U1:GND to your output connector negative. Ensure your output connector and wiring are rated for at least 2A.
Additional Considerations:
  • Efficiency and Safety: Given the higher power levels, ensure your design includes thermal management strategies, like heatsinks for the regulator and possible airflow. Also, consider safety features like overcurrent protection (e.g., using a fuse or PTC resettable fuse inline with the input) and reverse polarity protection if necessary.
  • Component Adjustments: The actual values (e.g., inductance of L1, capacitance of C1) may require adjustments based on your specific design requirements, the coupling efficiency of your wireless charging setup, and the characteristics of the charging transmitter. It's also key to prototype and test your design under various conditions.
  • Certification Considerations: For a product that might reach consumers, wireless transmission regulations, and standards (such as those by the FCC, Qi standard by the Wireless Power Consortium, etc.) will apply, which might require specific design criteria to be met and certifications to be obtained.
Building a high-power wireless charging system involves a careful selection of components and thoughtful design to manage efficiency, thermal performance, and safety. Always evaluate your design under actual operating conditions to ensure its performance meets your expectations.
2y
1
L1
Inductance
2.2uH
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • Power Net Portal
    Power Net Portal
    Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
    jharwinbarrozo
    11.4M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    15.8k
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M

Public Chocolate Robot Vacuum

Public Chocolate Robot Vacuum thumbnail
Welcome to your new project. Imagine what you can build here.

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor

Qty 1

Controls