LM2596 Buck Regulator Overview

flux

1:09

General (prev)
Project
File
U1
Below is a detailed explanation for U1:
1. Purpose and Key Functions
  • Role as a Buck Regulator:
    The LM2596DSADJR4G is a high-efficiency buck (step-down) regulator. It converts a higher input voltage (up to about 40 V) down to a stable lower output voltage—such as the 3.3 V required in your application—while supporting output currents up to 3 A.
  • Key Functions:
    • Switching Regulation: Uses pulse-width modulation (PWM) to rapidly switch the input voltage, with subsequent filtering to provide a smooth output.
    • Feedback Control: Employs a built-in error amplifier and a resistor divider (external for the adjustable version) to regulate the output voltage.
    • Protection Features: Includes current limit, thermal shutdown, and undervoltage lockout to protect both the device and the load.
    • High Efficiency: With a switching frequency of about 150 kHz, it allows for smaller inductors and capacitors compared to lower-frequency regulators, resulting in better power efficiency.
2. Operating Principle
  • PWM-Based Regulation:
    The regulator switches on and off at a fixed frequency. The duty cycle of the PWM signal determines the average voltage delivered to the output. A control loop (via a feedback pin) continually monitors the output and adjusts the duty cycle to maintain stable output despite load changes.
  • Operating Modes:
    • Continuous Mode: Under heavy loads, the inductor current flows continuously, ensuring steady operation.
    • Discontinuous Mode: At lighter load levels, the inductor current may momentarily fall to zero.
  • Role of External Components:
    External parts such as the catch (freewheeling) diode, input and output capacitors, and the inductor (e.g., L1) directly affect performance parameters like ripple voltage and transient response.
3. Common Applications
  • Voltage Regulation in DC Power Supplies:
    Frequently used to step down a higher DC voltage to one required by a digital circuit, microcontroller, or other logic circuitry.
  • Battery-Powered Equipment:
    Provides efficient power conversion in portable devices, automotive power systems, and renewable energy applications.
  • Industrial and Consumer Electronics:
    Suitable for designs where efficiency, reliability, and thermal performance are important, such as in switching power supplies and LED drivers.
4. Family/Series Overview
  • LM2596 Series Variants:
    The LM2596 family includes both adjustable and fixed output versions.
    • Adjustable Versions:
      • Allow users to set the desired output voltage using external resistor networks.
      • Offer flexibility over a wide range (e.g., 1.23 V up to around 35 V).
    • Fixed Voltage Versions:
      • Come pre-set to common voltages (e.g., 3.3 V, 5 V, 12 V) and simplify the design by reducing the number of external components.
  • Key Differences and Use Cases:
    • Design Flexibility: The adjustable models (like the one in your project) are ideal for applications where a non-standard voltage is needed.
    • Component Count: Fixed versions often reduce design complexity by eliminating the need to set up external voltage-divider networks.
    • Thermal and Electrical Performance: Both types are designed to handle up to 3 A loads efficiently, but the choice can be influenced by layout considerations, package type (TO-220 vs. D2PAK), and specific thermal or space requirements.
  • Notable Characteristics:
    • High efficiency compared to linear regulators, particularly when the voltage drop is large.
    • Compact external filter component sizes due to the high switching frequency.
    • Robust performance in both continuous and discontinuous conduction modes.
This detailed breakdown provides an in-depth look at U1—its function, operation in circuits, and considerations within the LM2596 series. If you need further clarification or additional details on any part of this explanation, please let me know.
Request usage guidance
Efficiency comparison
Alternative selection
312 days

Ready.

Sign up to send
what is the maximum amp output of this if the output voltage is set to 6V
markman

markman

@copilot what is the maximum amp output of this if the output voltage is set to 6V
10mo

copilot

The LM2596 is a step-down voltage regulator that can deliver an output current of up to 3 A. This specification is consistent in the datasheet for the LM2596, regardless of the output voltage setting, provided the input and output voltage difference and other conditions comply with the specified limits.
Therefore, even if the output voltage is set to 6 V, the maximum output current would still be 3 A. However, it's essential to ensure that the input voltage, in this case, does not exceed the limits for a regulated 6 V output while staying within the thermal and electrical constraints defined for the regulator.
Would you like to adjust the circuit for any specific condition or check any other parameters?
10mo
L1
Inductance
33u H
3V3
U1
C4
Capacitance
220u F
D1
C3
Capacitance
5n F
3V3
12V
3V3
R1
Resistance
1.21k Ω
C1
Capacitance
100u F
R2
Resistance
1.27k Ω
J1
P3
J2
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • Power Net Portal
    Power Net Portal
    Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
    jharwinbarrozo
    11.4M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
    jharwinbarrozo
    15.1k
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • RMCF0805JT47K0
    RMCF0805JT47K0
    47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
    jharwinbarrozo
    1.1M

Inspect

AM_Buck_Converter_Tut

AM_Buck_Converter_Tut
Description

Created
Last updated by markman
1 Contributor(s)
markman

Controls

Properties

Max Input Voltage
20 V
Max outp
3.3

Availability & Pricing

DistributorQty 1
Arrow$1.45–$2.03
Digi-Key$1.73–$4.31
LCSC$3.13–$3.29
Mouser$5.17
Verical$1.63–$3.04

Assets