555 Type, Timer/Oscillator (Single) IC 2.1MHz 8-PDIP

Like the NE555, the TLC555 has a trigger level equal to approximately one-third of the supply voltage and a threshold level equal to approximately two-thirds of the supply voltage. These levels can be altered by use of the control voltage terminal (CONT). When the trigger input (TRIG) falls below the trigger level, the flip-flop is set and the output goes high. If TRIG is above the trigger level and the threshold input (THRES) is above the threshold level, the flip-flop is reset and the output is low. The reset input (RESET) can override all other inputs and can be used to initiate a new timing cycle. If RESET is low, the flip-flop is reset and the output is low. Whenever the output is low, a low-impedance path is provided between the discharge terminal (DISCH) and GND. All unused inputs must be tied to an appropriate logic level to prevent false triggering.

• Very low power consumption: – 1mW typical at VDD = 5V • Capable of operation in astable mode • CMOS output capable of swinging rail to rail • High output current capability – Sink: 100mA typical – Source: 10mA typical • Output fully compatible with CMOS, TTL, and MOS • Low supply current reduces spikes during output transitions • Single-supply operation from 2V to 15V • Functionally interchangeable with the NE555; has same pinout • ESD protection exceeds 1000V per ANSI/ESDA/ JEDEC JS-001 • Available in Q-temp automotive – High-reliability automotive applications – Configuration control and print support – Qualification to automotive standards

#CommonPartsLibrary #IntegratedCircuit