Check this schematic component against the datasheet for [MPN].
Compare all pins with the datasheet and assign for each pin: pin orientation, section, and terminal order.
Important:
Do not replace pins, do not change pin numbers, and do not remap pins.
Only assign the correct properties: orientation, section, and terminal order.
Power pins must be first in the terminal order.
Ground / GND pins must be last.
Place all other pins between them into sections according to the datasheet: Input, Output, Control, Analog, Digital, Interface, RF, NC, Unclear / Check datasheet.
If one section has many pins, do not place all pins on one side of the symbol. Distribute them logically on both sides of the symbol: Left and Right, so the schematic symbol is balanced and easy to read.
If a pin function is unclear, do not guess; assign section Unclear / Check datasheet.
Terminal order must be logical for the schematic and match the datasheet.
Apply these assignments directly to the schematic component.