TVS DIODE 5VWM 9.2VC SOD-123FL

The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. SMF package is 50% smaller in footprint when compare to SMA package and deliverying one of the low height profiles (1.1mm) in the industry

• 200W peak pulsepower capability at 10/1000µs waveform, repetition rate (duty cycle): 0.01% •Compatible with industrial standard package SOD-123FL • Low profile: maximum height of 1.1mm. • Low inductance, excellent clamping capability • For surface mounted applications to optimize board space • High temperature to reflow soldering guaranteed: 260°C/430sec • Typical failure mode is short from over-specified voltage or current • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c • IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact) • ESD protection of data lines in accordance with IEC 61000-4-2 • EFT protection of data lines in accordance with IEC 61000-4-4 • Fast response time: typically less than 1.0ns from 0 Volts to VBR min • Glass passivated junction • Built-in strain relief • Plastic package is flammability rated V-0 per UL 94 • Meet MSL level1, per J-STD-020, LF maximun peak of 260°C • Matte tin lead–free plated • Halogen-free and RoHS compliant • Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD609A.01) • UL Recognized to UL 497B as an Isolated Loop Circuit Protector.

#CommonPartsLibrary #Diode