SCM1245MF Pin Correction
Correct this published SCM1245MF part using ONLY official Sanken datasheet https://www.semicon.sanken-ele.co.jp/sk_content/scm1245mf_ds_en.pdf (Rev 1.8). Current part wrongly has 31 pins and shifts power pins. Official DIP33 pin table: 1 FO1,2 OCP1,3 LIN1,4 COM1,5 HIN1,6 VCC1,7 VB1,8 HS1,9 FO2,10 OCP2,11 LIN2,12 COM2,13 HIN2,14 VCC2,15 VB2,16 HS2,17 FO3,18 OCP3,19 LIN3,20 COM3,21 HIN3,22 VCC3,23 VB3,24 HS3,25 VBB,26 W,27 LS3,28 VBB pin trimmed,29 V,30 LS2,31 VBB pin trimmed,32 U,33 LS1. Update datasheet URL/manufacturer metadata. Ensure symbol exposes all 33 physical positions, with trimmed pins represented as NC/Not Connected if platform permits, and footprint terminal mapping exactly matches official numbering without shifting 29-33. Preserve correct DIP33 footprint geometry. Publish corrected version. Report exact changes and URL.
Worked for 4 sec
I’ll validate the published part against Sanken Rev. 1.8, correct the 33-position symbol/terminal mapping and metadata if permissions allow, then verify and publish the revision.
Worked for 2 mins 7 sec
I verified the defect against Sanken Rev. 1.8, but publication is blocked because you have comment-only access to the LCSC-owned part. Required changes are: add trimmed NC positions 28 and 31, remap 29=V, 30=LS2, 32=U, 33=LS1, increase the symbol from 31 to 33 terminals, and replace the incorrect datasheet/manufacturer metadata while preserving DIP33 geometry.
Current unchanged part: /lcsc/scm1245mf
I filed a part-quality report with the Flux engineering team; no corrected version URL exists yet.
I filed a part-quality report with the Flux engineering team; no corrected version URL exists yet.
Fork and correct part
Prepare correction report
Verify my inverter part
