Great question. Let’s clarify one more detail. I'll ask one quick question:
Additional Components:
Would you like to integrate status LED indicators (or any other interface status components like a buzzer) into your design? Please let me know your preference or if there are any other components you want to include.
Below is the updated design summary incorporating the new component:
ESP32-S3R2: Main controller, interfaced via SPI.
4‑inch capacitive touch display: Interfaced via SPI.
BME680: Environmental sensor with I2C interface, includes 4.7 kΩ pull-up resistors and a 0.1 µF decoupling capacitor.
W25Q128JVSIQ: SPI flash memory.
PN7220: NFC+RFID reader using an I2C interface, includes 4.7 kΩ pull-up resistors and a 0.1 µF decoupling capacitor.
MCP73871: Charging/power management IC, with a combination of a bulk capacitor (e.g., 1 µF or greater) and a 0.1 µF decoupling capacitor.
VEML7700-TR: Ambient light sensor added with an I2C interface (expected to use similar 4.7 kΩ pull-up resistors and 0.1 µF decoupling capacitor as standard if sharing the same bus).
Would you like to proceed with wiring suggestions or any further modifications?