Find or Create Switch 3D Model
Thought for 21 sec
I’ll search for an existing CSS-1310TB model, or create one from the manufacturer’s dimensions, then check its alignment with the footprint.
Thought for 14 mins 40 sec
Thought for 6 sec
Created 2 tasks.
1/2 Find or create and attach a dimensioned CSS-1310TB 3D model.
Find or create and attach a dimensioned CSS-1310TB 3D model.
Verify model scale, seating, and footprint alignment.
Thought for 11 sec
Awaiting 1 task
Thought for 5 sec
Referenced guidance.
"CSS-1310TB 3D Model Installation" completed.
Thought for 22 sec
I created and attached a datasheet-based model; the vendor CAD download required a login. I’m checking its scale and footprint fit now; some undimensioned cosmetic details are simplified.
Thought for 1 min 52 sec
Thought for 10 sec
Awaiting 1 task
"CSS-1310TB Model Verification" completed.
Thought for 29 sec
Created and attached a datasheet-based 3D model, verified its scale, terminal alignment, and board seating, and left the existing footprint unchanged. It’s a simplified external model—not detailed vendor CAD—with sources and limitations recorded in Model Verification.
