Part Review and Datasheet Analysis
Thought for 1 min 7 sec
Yes — I enhanced the part project properties with datasheet-derived metadata.
Updated project properties
Table
| Property | Value |
|---|---|
| Part Description | Single-Chip Charger and DC/DC Converter IC For Portable Applications |
| Datasheet | Set |
| Package Family | VQFN |
| Package Code | RHL |
| Package Drawing | RHL0020A |
| Pin Count | 21 |
| Package Pins | 20 |
| Exposed Pad | Yes |
| Recommended Operating Temperature Min | 0 °C |
| Recommended Operating Temperature Max | 85 °C |
| AC Input Voltage Min | 4.5 V |
| AC Input Voltage Max | 6.5 V |
| USB Input Voltage Min | 4.35 V |
| USB Input Voltage Max | 6.5 V |
| Battery Regulation Voltage | 4.2 V |
| Maximum Charge Current | 500 mA |
| Maximum DC-DC Output Current | 300 mA |
| DC-DC Output Voltage Range | 0.7 V to VBAT |
| USB Charge Modes | 100 mA / 500 mA |
| Special Features | Added |
- The part project metadata is now much stronger for searchability, reuse, and review.
- The main remaining technical gap is still the footprint geometry audit against the package drawing.
If you want, I can do that next and check the land pattern for manufacturing-risk mismatches.
Check footprint geometry
Add more electrical properties
Document metadata choices
Thought for 1 sec
- Set Part Description to "Single-Chip Charger and DC/DC Converter IC For Portable Applications"
- Set Datasheet to "https://storage.googleapis.com/graviton-electric-symbols/document_assets/lcsc/2009151033_Texas-Instruments-BQ25015RHLR_C55515..."
- Set Package Family to "VQFN"
- Set Package Code to "RHL"
- Set Package Drawing to "RHL0020A"
- Set Pin Count to "21"
- Set Package Pins to "20"
- Set Exposed Pad to "Yes"
- Set Recommended Operating Temperature Min to "0"
- Set Recommended Operating Temperature Max to "85"
- Set AC Input Voltage Min to "4.5"
- Set AC Input Voltage Max to "6.5"
- Set USB Input Voltage Min to "4.35"
- Set USB Input Voltage Max to "6.5"
- Set Battery Regulation Voltage to "4.2"
- Set Maximum Charge Current to "500"
- Set Maximum DC-DC Output Current to "300"
- Set DC-DC Output Voltage Range to "0.7 V to VBAT"
- Set USB Charge Modes to "100 mA / 500 mA"
- Set Special Features to "Li-Ion/Li-Poly charge management plus synchronous DC-DC converter; autonomous AC/USB source selection; integrated power FET a..."
