Planning circuit additions.

Clarifying battery connector needs.

Using Knowledge Base Tool.

Starting 4 component searches

Dispatching Library tool to find: "USB Type-C Receptacle"

Dispatching Library tool to find: "Terminal Block 2-pin"

Dispatching Library tool to find: "USB-C TVS Diode"

Dispatching Library tool to find: "5.1k resistor"

Creating search plan for: "USB Type-C Receptacle"

Creating search plan for: "Terminal Block 2-pin"

Creating search plan for: "USB-C TVS Diode"

Creating search plan for: "5.1k resistor"

Searching: "Search for a standard 2-pin PCB-mounted terminal block used for wiring connections. The component should be designed for board mounting and support connections for two wires. Look for common features such as through-hole or SMT mounting options and typical pitch dimensions."

Searching: "Identify a 2-pin terminal block suitable for direct soldering onto a PCB. The component should have a design optimized for reliable electrical connections in low-current applications, with specifications such as a standardized pitch (e.g., 2.54 mm or 5.08 mm) and durable insulation properties."

Searching: "Target a 2-position PCB mounting terminal block with defined mechanical constraints like pitch and mounting style. The search should cover variants including screw or spring clamp connections for secure wiring in control or signal interfacing applications, ensuring robust board-to-wire connectivity."

Found 49 results.

Searching: "Terminal Block 2-pin"

Searching: "Seeking a USB-C TVS diode designed for ESD protection on USB Type-C interfaces. The component should provide fast transient clamping and be suitable for protecting both power and data lines in USB-C ports."

Searching: "Looking for a TVS diode specifically optimized for USB Type-C applications. The part should exhibit low capacitance and rapid response characteristics to protect against voltage spikes in USB data and power circuits."

Searching: "Searching for a low capacitance, fast-response TVS diode for USB-C protection. This component is intended to safeguard high-speed USB data lines (e.g., USB 3.1) and the VBUS line, ensuring minimal interference with signal integrity while providing robust transient protection."

Searching: "Seeking a surface-mount ESD diode designed for USB-C ports. The diode must offer high transient voltage suppression, low parasitic capacitance, and reliable clamping for both the VBUS and data lines in USB Type-C applications, ensuring protection against electrostatic discharge events."

Searching: "Searching for a PCB-mounted USB Type-C receptacle designed for high-speed data and power delivery. The component should match the USB Type-C standard with multiple contacts (often 24-pin) and mechanical features such as alignment keys and robust latching mechanisms, typical for use in modern electronic devices."

Searching: "Looking for a surface-mount USB-C connector that enables USB 3.x data signals and supports power delivery specifications. The part should be suitable for PCB assembly, include ESD protection features and be compliant with the USB Type-C specifications while fitting common board layouts."

Searching: "Seeking a PCB-mount USB Type-C receptacle that offers a 24-pin configuration optimized for power delivery (PD) and high-speed data. This component must support current levels typically up to 3A or 5A, comply with USB PD protocols, and be suitable for integration in compact, modern electronic devices."

Found 60 results.

Searching: "USB-C TVS Diode"

Found 60 results.

Searching: "USB Type-C Receptacle"

Searching: "Looking for a resistor with a nominal value of 5.1 kΩ intended for general-purpose applications. The resistor could be used in voltage divider circuits, biasing, or similar uses without strict packaging or tolerance requirements specified."

Searching: "Searching for a 5.1 kΩ resistor in a through-hole format for applications such as power management or signal biasing, typically rated at 1/4 watt with a common tolerance (e.g., ±5%). This is suitable for assembly on PCBs or prototyping on perf boards."

Searching: "Looking for a 5.1 kΩ resistor in an SMD package (e.g., 0805 or 0603) intended for compact PCB designs. The resistor should be appropriate for standard low-power applications, like voltage dividers or filtering circuits, with no special high precision requirement stated."

Searching: "Searching for a higher precision 5.1 kΩ resistor with 1% tolerance and a 1/4 watt rating. This resistor is intended for applications requiring tighter control over resistance values, such as precision voltage references or calibration circuits, and may be available in both through-hole and SMD packages."

Found 70 results.

Searching: "5.1k resistor"

Completed 4 component searches.

Checking if I can make the changes for you.

Assessing power connections.