Chat
Welcome to Flux
Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More
Explain project
Write a project description
Find schematic issues
Create a test plan
Ready.
whats the difference between the various max31865 packages
1y
The MAX31865 is a Precision RTD (Resistance Temperature Detector) to Digital Converter designed by Maxim Integrated (now part of Analog Devices). It provides an easy way to make precise temperature measurements with RTD sensors. The MAX31865 comes in different package options to suit various needs in terms of size, pin count, and application requirements. Here are the primary differences among the commonly available MAX31865 package types:
-
TSSOP (Thin Shrink Small Outline Package):
- Pin Count: Typically 20 pins.
- Dimensions: Generally more compact than PDIP, making it suitable for space-constrained applications.
- Mounting: Surface-mount technology (SMT), which is more suited to automated assembly processes.
- Thermal Performance: Better heat dissipation compared to PDIP due to its SMT nature.
-
QFN (Quad Flat No-leads Package):
- Pin Count: Can also be found in 20-pin configurations for the MAX31865.
- Dimensions: Similar in size to TSSOP but without leads, which can reduce the package size further.
- Mounting: Surface-mount. The lack of leads requires a pad on the PCB for soldering, which can be challenging for manual soldering but is excellent for thermal conduction.
- Thermal Performance: Excellent heat dissipation through the pad that connects directly to the PCB.
-
PDIP (Plastic Dual In-line Package):
- Pin Count: Not commonly available for the MAX31865, as this technology is typically used for older or hobbyist-friendly integrated circuits.
- Dimensions: Larger than TSSOP and QFN, making it easier to handle for manual soldering or prototyping.
- Mounting: Through-hole technology (THT), which is easier for hand soldering and prototyping but takes more space on the PCB.
- Thermal Performance: Inferior to TSSOP and QFN due to the through-hole mounting style and larger size.
For the MAX31865 specifically, you will most commonly find the TSSOP and QFN packages. The choice between these options depends on your design requirements, including space constraints, manufacturing capabilities (whether you are hand soldering or using automated processes), and thermal performance needs. The TSSOP package (e.g., MAX31865AAP+ for the 20-pin version) is quite popular for a balance of manageability and compactness, whereas the QFN package offers a smaller footprint and better heat dissipation at the cost of being slightly more challenging to hand solder.
1y
Someone is typing...
9
what's the maximum current for U1?
1y
The MAX31865AAP+ (designated as U1 in your project) does not directly specify a "maximum current" in the traditional sense like a maximum supply or output current because it's a RTD-to-Digital Converter. However, there are several current-related parameters you can consider for understanding its power requirements and limitations:
-
Supply Current vs. Temperature in different modes, which helps you gauge how much current U1 will draw under normal operating conditions depending on the temperature and mode of operation.
-
Leakage Current Per Pin vs. Temperature for the FORCE+, FORCE2, RTDIN+, and RTDIN- pins when a voltage of 1V is applied to them, useful for understanding potential power loss and for designing power management efficiently.
-
Continuous Power Dissipation Capacity at a certain ambient temperature, which indirectly correlates with the amount of current it can safely handle without overheating, considering the device's voltage.
For example, the device has a Voltage Range on VDD relative to GND1 from -0.3V to +4.0V[1]. Assuming a typical value of 3.3V for VDD, to assess the maximum supply current, you would look at the supply current characteristics over the operating temperature range provided in the datasheet.
Unfortunately, without a specific maximum supply current value listed, you would typically refer to the typical IDD (supply current) values provided under different conditions (such as "ADC auto conversion mode" and "ADC normally off mode") to determine how much current U1 requires under typical operating conditions[2].
If designing for power constraints, also consider the leakage currents and continuous power dissipation as additional factors. These aspects combined help ensure U1 operates reliably within your circuit without exceeding its power handling capabilities.
[1] Page 1
[2] Page 6
1y
Someone is typing...
11
hello
Someone is typing...
3
how many spi ports does the max31865 have?
1y
The MAX31865 supports a single SPI interface. It makes use of four pins for SPI-compatible communications: SDI (serial-data in), SDO (serial-data out), CS (chip select), and SCLK (serial clock)[1]. This arrangement suggests that the MAX31865 is designed to be used with only one SPI port.
[1] Page 16
1y
Someone is typing...
10
can the max31865 use i2c
Someone is typing...
7
hello, are you healthy now?
Someone is typing...
5
what can you tell me about U2?
2y
I'm sorry, but based on the project information you've provided, there is no component designated as U2 in this circuit. The designators that exist are C2, C3, C4, C5, C12, SDO, PIGND, ~CS, R1, L1, L2, U1 (referring to both MAX31865AAP+ and the Pico), SDI, SCLK, ~DRDY, +5V, J1.
If you meant another component or if you have updated your schematic with a component designated as U2 since the time this data was provided, please let me know so I can provide tailored assistance.
2y
Someone is typing...
6
can the max31865 do i2c
1y
The MAX31865 IC is primarily designed for interfacing with RTD sensors (Resistance Temperature Detectors) and is optimized for SPI (Serial Peripheral Interface) communication. It does not natively support I2C (Inter-Integrated Circuit) communication. The MAX31865's datasheet specifies its communication protocol as SPI, which includes dedicated pins for SCLK (Serial Clock), SDI (Serial Data In), SDO (Serial Data Out), and ~CS (Chip Select).
For projects requiring temperature sensing with an I2C interface, you might consider alternatives that are designed to support I2C, depending on your specific requirements. If the use of the MAX31865 is essential for your application (e.g., due to its specific features or RTD support), and you need to integrate it into an I2C bus, you would have to use a microcontroller to act as a bridge between the SPI device and the I2C bus. This involves the microcontroller reading data from the MAX31865 via SPI and then transmitting it over I2C to whatever master device is on the I2C bus.
1y
Someone is typing...
8
1
hello, can you help me with U1
1y
U1 in your project has been designated with two different parts:
- MAX31865AAP+, which is an RTD-to-Digital Converter and doesn't have general-purpose I/O pins (GPIO).
- Pico, which I assume refers to the Raspberry Pi Pico, a popular microcontroller.
Assuming you're asking about the Raspberry Pi Pico (since the MAX31865AAP+ does not have GPIOs): No, individual GPIO pins on the Raspberry Pi Pico cannot source or sink 500mA. The Raspberry Pi Pico's GPIO pins can typically source or sink around 12mA per pin with a maximum total current draw from all GPIOs combined not exceeding around 300mA under normal circumstances. This is common across most microcontrollers, as GPIO pins are designed for signaling, not for powering high-current devices directly.
For applications requiring more than a few mA, it's advisable to use a transistor or a dedicated driver IC to switch the higher current. This approach would involve using the GPIO to control the transistor or driver IC, which in turn would handle the higher current required by your load.
1y
Someone is typing...
4
C5
Capacitance
100n F
R1
Resistance
400 Ω
SDO
PIGND
~CS
PIGND
C3
Capacitance
10u F
L2
Inductance
Inductance
C2
Capacitance
.1u F
SCLK
~DRDY
SDO
PIGND
L1
Inductance
Inductance
PIGND
U1
PIGND
PIGND
PIGND
PIGND
U1
C12
Capacitance
10u F
PIGND
J1
C4
Capacitance
.1u F
PIGND
SCLK
~CS
+5V
~DRDY
SDI
SDI
Reviews
Electrical Rule Checks
Missing Footprints
Reports parts that have no footprint.
Design Rule Checks
Overlapping Copper
Reports copper elements that are shorting.
Invalid Layer
Reports nodes that are assigned to a layer that doesn't exist in the layout stackup.
Component Overrides
Reports components that have been modified using the "!important" flag.
Airwires • 16
Designators | Net | |
|---|---|---|
Deprecated Rules
Reports nodes that are using rules that are not supported anymore.
Layers with Multiple Fills
Reports layers that have multiple copper fills of different nets. Make sure the Connected Layers rule value of nets with fills is valid.
Floating Copper • 1
Name | |
|---|---|
Protected Intrusions
Reports intrusions from objects of other nets into polygons or fills that have the Protected layout rule applied.
System Checks
Auto-Layout
BetaReports issues with Auto-Layout if Flux cannot route something or must ignore a configuration.
Passive Components
Resistor Power Rating
BetaChecks that the power traveling across a given resistor is under its rating with 50% headroom.
Learn morePull Up/Pull Down Presence
BetaChecks that IC pins that require pull up or pull down resistors have them.
Learn moreCapacitor Voltage Rating
BetaChecks that capacitors have appropriate voltage ratings to prevent overheating and ensure reliable circuit operation.
- Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portaljharwinbarrozo43.0M
- Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #powerjharwinbarrozo11.4M
- A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #genericsjharwinbarrozo15.1k
- An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.Terminal
- 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlinkjharwinbarrozo1.2M
- 10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcanjharwinbarrozo1.2M
- Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlinkjharwinbarrozo1.1M
Inspect
Temperature controller pi board 0f37
Controls
Properties
Availability & Pricing
| Distributor | Qty 1 | |
|---|---|---|
| Digi-Key | $8.10 | |
| LCSC | $5.15 | |
| Mouser | $8.27 | |
Assets
Welcome 👋
Flux helps you build PCBs faster with an AI teammate!
Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.
kofron
copilot