Power Circuit Design

koertsunay

Objective

Report-only verification that the Bottom GND polygon exists and behaves correctly. Do not modify the design.

Scope (STRICT, NO EDITS)

Do NOT create, move, or edit any object.
Do NOT start routing or place polygons/zones.
REPORT ONLY.

Tasks

Polygons inventory
- List all polygons/fills with: • Layer • Net • Approx. area (if available)
- Confirm there is at least one polygon on Bottom layer tied to GND.
Connectivity spot-check (report-only)
- For these GND pads, report whether they have thermal/solid connections to the Bottom GND polygon: • J24V_IN:GND • D1 (TVS):GND • U1 (buck): GND pad • U2 (3.3 V LDO): GND/EP • J_SDCARD: shield GND
- If thermal spokes cannot be programmatically detected, state “unable to auto-detect” and just report whether the GND polygon touches those pads.
Targeted DRC (categories only; no edits)
- Run/check these categories and summarize counts: • Floating/Isolated copper (islands) • Overlapping fills / polygon overlaps • Protected intrusions (keep-out violations) • Clearance violations (global)
- If any violations remain, list each with: • Category • Object(s) • Coordinates or reference • One-line hint on what to adjust manually
Crystal keep-out confirmation
- Report if any keep-out rules/zones are present around the crystal loop (Y1, C15, C16).
- If present, confirm the Bottom GND polygon is not filling inside that keep-out.
Suggested GND stitching via spots (TEXT-ONLY)
- Suggest 3–6 coordinates or reference-near spots where stitching vias would most help (buck GND loop, TVS/J24V_IN GND, LDO GND/EP, SD shield corners).
- Do not place vias; suggestions only.

Output format

Return a concise checklist:

Polygons found (layer/net/area)
GND polygon on Bottom: YES/NO
GND contact at key pads: per pad YES/NO (or “undetected”)
DRC summary: counts per category + short list of remaining items
Crystal keep-out: present YES/NO; fill inside keep-out YES/NO
Suggested stitching via spots: bullet list (text-only)

Important

This is a verification pass. DO NOT queue actions or start long plans. If any step is unsupported by the API, say so and continue with the rest.

179 days

flux

1:22

Sorry, something went wrong. Please try again later.

179 days

U2 OUT - C8 P1

U3 PH1 - JUART2 3

U2 OUT - C8 P1

RY P2 - Y1 1

J_DI 2 - U4 ~

JICSP 1 - U3 PB3

U1 SW - L1 P1

J_DI 4 - U4 ~

J_SDCARD P5 - U3 PB1

U2 OUT - C8 P1

J_SDCARD P3 - U3 PB2

U3 PA2 - R13 P1

U3 PA3 - R14 P1

U1 SW - L1 P1

U3 XTAL2 - Y1 2

U1 SW - L1 P1

J24V_IN 1 - D1 1

JICSP 1 - U3 PB3

U1 SW - L1 P1

U3 PE1 - JUART1 3

U1 SW - L1 P1

U3 PH0 - JUART2 4

U1 SW - L1 P1

U2 OUT - C8 P1

U1 SW - L1 P1

U3 XTAL2 - Y1 2

U1 SW - L1 P1

U2 OUT - C8 P1

U1 SW - L1 P1

U3 PB0 - U_SDLS 3A

U1 SW - L1 P1

U2 OUT - C8 P1

U1 SW - L1 P1

JICSP 1 - U3 PB3

U3 PB2 - U_SDLS 2A

U1 SW - L1 P1

U2 OUT - C8 P1

U3 PA1 - R12 P1

U1 SW - L1 P1

J_DI 2 - U4 ~

U1 SW - L1 P1

J_DI 4 - U4 ~

U3 PA2 - R13 P1

U1 SW - L1 P1

RY P2 - Y1 1

U3 PA3 - R14 P1

U1 SW - L1 P1

U3 PA0 - R11 P1

J_DI 2 - U4 ~

U3 PB1 - U_SDLS 1A

U1 SW - L1 P1

U3 PA1 - R12 P1

U1 SW - L1 P1

U3 PA0 - R11 P1

U1 SW - L1 P1

U3 PE0 - JUART1 4

U1 SW - L1 P1

U3 PB2 - U_SDLS 2A

C14

Capacitance

C11

Capacitance

R15

Resistance

500 Ω

C16

Capacitance

18pF

R20

Resistance

500 Ω

R_MISO

Resistance

22 Ω

C20

Capacitance

R14

Resistance

500 Ω

Capacitance

C18

Capacitance

R11

Resistance

500 Ω

Capacitance

R19

Resistance

500 Ω

R16

Resistance

500 Ω

R18

Resistance

500 Ω

Capacitance

R12

Resistance

500 Ω

Capacitance

R10

Resistance

500 Ω

R_MOSI

Resistance

22 Ω

R13

Resistance

500 Ω

C19

Capacitance

R21

Resistance

500 Ω

R_XTAL

Resistance

DNP Ω

R17

Resistance

500 Ω

C15

Capacitance

18pF

Capacitance

C12

Capacitance

R_SCK

Resistance

22 Ω

Resistance

10kΩ

C10

Capacitance

R_CS

Resistance

22 Ω

R22

Resistance

500 Ω

C13

Capacitance

TP5

TP_GND

TP_DO3

TP_DO2

TP_DO1

TP_5V

TP1

TP_3V3

TP_DO4

TP_SSR1

TP2

TP_SD_CD

TP4

TP_V24

TP3

TP_SSR2

J_PRINTER

Inductance

GND

Inductance

J_NEXTION

JICSP

Reviews

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
15.8k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M

Project Name

Description

Nextion HMI & Thermal Printer UART Integration with Enhanced microSD SPI Interface, ESD Protection, and LP3982-Regulated 3.3V Power Rail

Properties

UART1 He… Pinout

Allow Substitutes

System Ar…itecture

Role

Part Type

Designators

Domain

Role Details

ERC_Warnings

Operating Voltage

ERC_deco…_review

ERC_pull…n_review

Output Voltage(s)

ICSP Hea…r Pinout

JLCPCB P…rt Class

PCB Stac… Layers

UART2 He… Pinout

Power R…rements

ERC Summary

Pricing & Availability

Distributor	Qty 1
Arrow	$19.73–$20.21
Digi-Key	$20.43
LCSC	$22.54
Mouser	$6.70
TME	$24.32
Verical	$26.54–$33.20

Controls

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.