Arduino Socket Modification

flux

Work completed
  • Updated project description to “Direct-Mount Arduino Nano Every Board with Edge-Accessible USB” (#ArduinoNanoEvery #DirectMount #USBEdge).
  • Removed original Arduino socket connectors from schematic and PCB.
  • Added U1 footprint.
  • Added two J1 footprints assigned to J1 and J2.
  • Reconnected all Nano Every pins 1:1 to existing nets:
    • U1:D13/SCK → J1:Pin_1
    • U1:3V3 → J1:Pin_2
    • U1:AREF → J1:Pin_3
    • U1:A0/DAC0 → J1:Pin_4
    • U1:A1 → J1:Pin_5
    • U1:A2 → J1:Pin_6
    • U1:A3 → J1:Pin_7
    • U1:A4/SDA → J1:Pin_8
    • U1:A5/SCL → J1:Pin_9
    • U1:A6 → J1:Pin_10
    • U1:A7 → J1:Pin_11
    • U1:5V → J1:Pin_12
    • U1:RESET → J1:Pin_13
    • U1:GND → J1:Pin_14 & J2:Pin_4
    • U1:VIN → J1:Pin_15
    • U1:TX → J2:Pin_1
    • U1:RX → J2:Pin_2
    • U1:RESET1 → J2:Pin_3
    • U1:D2 → J2:Pin_5
    • U1:D3 → J2:Pin_6
    • U1:D4 → J2:Pin_7
    • U1:D5 → J2:Pin_8
    • U1:D6 → J2:Pin_9
    • U1:D7 → J2:Pin_10
    • U1:D8 → J2:Pin_11
    • U1:D9 → J2:Pin_12
    • U1:D10 → J2:Pin_13
    • U1:D11/MOSI → J2:Pin_14
    • U1:D12/MISO → J2:Pin_15
  • Ran ERC and resolved all schematic issues.
Unable to automate
  • Precise positioning of the Nano Every module and headers for USB-port alignment at the board edge.
  • Silkscreen and keepout updates around the USB area.
  • Running DRC and adjusting header hole sizes/clearances.
Success criteria status

Table

CriterionStatus
Arduino sockets removed✅
Nano Every footprint added & USB-port oriented⚠️ Partial (footprint added, orientation pending)
All Nano Every pins connected✅
Silkscreen/keepouts updated for USB access❌
ERC/DRC report no errors⚠️ ERC OK, DRC pending
Next step
Position the U1 module and its header footprints so the USB port aligns with the board edge, update silkscreen and keepout regions for unobstructed access, then run DRC and adjust hole sizes and clearances as needed.
U1 VIN - J1 Pin_15
U1 3V3 - J1 Pin_2
U1 D12/MISO - J2 Pin_15
U1 RX - J2 Pin_2
U1 RESET1 - J2 Pin_3
U1 TX - J2 Pin_1
U1 A7 - J1 Pin_11
U1 D13/SCK - J1 Pin_1
U1 A3 - J1 Pin_7
U1 D7 - J2 Pin_10
U1 D8 - J2 Pin_11
U1 A0/DAC0 - J1 Pin_4
U1 A0/DAC0 - J1 Pin_4
U1 TX - J2 Pin_1
U1 RX - J2 Pin_2
U1 A5/SCL - J1 Pin_9
U1 D4 - J2 Pin_7
U1 D10 - J2 Pin_13
U1 AREF - J1 Pin_3
U1 D11/MOSI - J2 Pin_14
U1 A5/SCL - J1 Pin_9
U1 D2 - J2 Pin_5
U1 A1 - J1 Pin_5
U1 A4/SDA - J1 Pin_8
U1 VIN - J1 Pin_15
U1 D2 - J2 Pin_5
U1 GND - J1 Pin_14
U1 D5 - J2 Pin_8
U1 RESET - J1 Pin_13
U1 D11/MOSI - J2 Pin_14
U1 D4 - J2 Pin_7
U1 A4/SDA - J1 Pin_8
U1 D10 - J2 Pin_13
U1 D13/SCK - J1 Pin_1
U1 D3 - J2 Pin_6
U1 GND - J1 Pin_14
U1 D6 - J2 Pin_9
U1 D9 - J2 Pin_12
U1 A6 - J1 Pin_10
U1 A3 - J1 Pin_7
U1 A1 - J1 Pin_5
U1 AREF - J1 Pin_3
U1 5V - J1 Pin_12
U1 A7 - J1 Pin_11
U1 A2 - J1 Pin_6
U1 D7 - J2 Pin_10
U1 5V - J1 Pin_12
U1 RESET - J1 Pin_13
U1 D9 - J2 Pin_12
U1 RESET1 - J2 Pin_3
U1 D5 - J2 Pin_8
U1 A6 - J1 Pin_10
U1 D6 - J2 Pin_9
U1 GND - J1 Pin_14
U1 3V3 - J1 Pin_2
U1 D12/MISO - J2 Pin_15
U1 D3 - J2 Pin_6
U1 D8 - J2 Pin_11
U1 A2 - J1 Pin_6
C1
Capacitance
100nF
J1
G
J2
D
C2
Capacitance
100nF
S
S
S
U1
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    16.6k
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M
  • 1070TR
    1070TR
    Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
    jharwinbarrozo
    700.5k

DMP3013SFV

Direct-Mount Arduino Nano Every Board with Edge-Accessible USB

Properties

Q

diodes.com/assets/Datasheets/DMP3013SFV.pdf

DMP3013SFV

Diodes_PowerDI3333-8

Pricing & Availability

No results found.

Controls