Clarification Request

0:20

Chat History

Project

Blood Pressure Sensor

BT1

charging-module

esp32-c3 mini-1

ferrite besds

Fetal-movement sensor

heart-rate-sensor

LED2

OLED display

voltage regulator

To tailor a new wearable-health system with different sensors plus an onboard AI engine, let’s firm up your requirements. Could you answer:

Sensor suite
- Which vital signs or environmental parameters must it measure? (e.g., SpO₂, temperature, motion, glucose)
AI functionality
- What processing do you need on-board? (e.g., anomaly detection, signal filtering, ML inference)
- Target throughput or model size?
Form factor & power
- Max size/weight and battery life goal?
- Recharge method (USB, wireless)?
Connectivity & UI
- How will data be relayed? (BLE, Wi-Fi, cellular?)
- Local user interface? (LEDs, display, haptics?)
Regulatory & safety
- Any specific medical or EMI standards to meet?

Once we have these, I can sketch a block-level architecture (power, sensor front-end, AI SoC, comms, display, battery management). Let me know!

Specify sensor list

Clarify AI chip role

Define form factor and connectivity

Regulatory and integration scope

315 days

Ready.

connect charging controller aand battery

katende

@copilot connect charging controller aand battery

copilot

To connect a charging controller to the battery in your wearable pregnancy monitoring system, you need to ensure that the flow of power is correctly managed. Based on the standard operation, the charging controller will manage charging the battery and providing power to the system when the external charger is connected.

Here are the key connections:

Connect Charging Module to Battery:
- Connect $[charging-module]:BAT+$ to $[battery]:positive$ terminal.
- Connect $[charging-module]:BAT-$ to $[battery]:negative$ terminal.
Connect Charging Module to System Power:
- Connect $[charging-module]:OUT+$ to the power input of your system, typically $[voltage regulator]:VI$ if it requires regulated voltage.
- Connect $[charging-module]:OUT-$ to the system ground, which may be connected to $[voltage regulator]:GND$ or $[esp32-c3 mini-1]:GND$ .
Connect Input for Charging:
- Connect $[charging-module]:IN+$ to the positive terminal of your charging supply.
- Connect $[charging-module]:IN-$ to the negative terminal of your charging supply.

Here's a concise format for the connections:

Connect $[charging-module]:BAT+$ to $[battery]:positive$ terminal.
Connect $[charging-module]:BAT-$ to $[battery]:negative$ terminal.
Connect $[charging-module]:OUT+$ to $[voltage regulator]:VI$ .
Connect $[charging-module]:OUT-$ to $[voltage regulator]:GND$ .
Connect $[charging-module]:IN+$ to the positive terminal of your charging supply.
Connect $[charging-module]:IN-$ to the negative terminal of your charging supply.

Should I carry out these connections on your schematic? Also, please confirm if the

[battery]

element needs to have explicit pins listed or if it's connected externally.

connectthe parts

katende

@copilot connectthe parts

copilot

Let's get started by connecting the components in your wearable pregnancy monitoring system. Here are the connections based on the designators and pins specified:

Power Connections

Battery to Voltage Regulator:
- Connect the positive terminal of the battery to $\text{{voltage regulator}}: \text{{VI}}$ .
- Connect the negative terminal of the battery to $\text{{voltage regulator}}: \text{{GND}}$ .
Voltage Regulator to Components:
- Connect $\text{{voltage regulator}}: \text{{VO}}$ to $\text{{esp32-c3 mini-1}}: \text{{3V3}}$ .
- Connect $\text{{voltage regulator}}: \text{{VO}}$ to $\text{{Fetal-movement sensor}}: \text{{VDD}}$ .
- Connect $\text{{voltage regulator}}: \text{{GND}}$ to GND net.

Ground Connections

Common Ground:
- Connect $\text{{esp32-c3 mini-1}}: \text{{GND}}$ to GND net.
- Connect $\text{{Fetal-movement sensor}}: \text{{GND}}$ to GND net.
- Connect $\text{{heart-rate-sensor}}: \text{{GND}}$ to GND net.
- Connect $\text{{Blood Pressure Sensor}}: \text{{GND}}$ to GND net.

Sensor Connections

Fetal-movement sensor (MPU-6050):
- Connect $\text{{Fetal-movement sensor}}: \text{{SDA}}$ to $\text{{esp32-c3 mini-1}}: \text{{IO19}}$ .
- Connect $\text{{Fetal-movement sensor}}: \text{{SCL}}$ to $\text{{esp32-c3 mini-1}}: \text{{IO18}}$ .
Heart-rate sensor (MAX30102):
- Connect $\text{{heart-rate-sensor}}: \text{{SDA}}$ to $\text{{esp32-c3 mini-1}}: \text{{IO4}}$ .
- Connect $\text{{heart-rate-sensor}}: \text{{SCL}}$ to $\text{{esp32-c3 mini-1}}: \text{{IO5}}$ .
Blood Pressure Sensor (BMP280):
- Connect $\text{{Blood Pressure Sensor}}: \text{{SDI}}$ to $\text{{esp32-c3 mini-1}}: \text{{IO10}}$ .
- Connect $\text{{Blood Pressure Sensor}}: \text{{SCK}}$ to $\text{{esp32-c3 mini-1}}: \text{{IO9}}$ .

Display Connections

OLED Display (SSD1327):
- Connect $\text{{OLED display}}: \text{{DIN}}$ to $\text{{esp32-c3 mini-1}}: \text{{IO13}}$ .
- Connect $\text{{OLED display}}: \text{{CLK}}$ to $\text{{esp32-c3 mini-1}}: \text{{IO14}}$ .
- Connect $\text{{OLED display}}: \text{{CS}}$ to $\text{{esp32-c3 mini-1}}: \text{{IO15}}$ .
- Connect $\text{{OLED display}}: \text{{DC}}$ to $\text{{esp32-c3 mini-1}}: \text{{IO16}}$ .
- Connect $\text{{OLED display}}: \text{{RST}}$ to $\text{{esp32-c3 mini-1}}: \text{{IO17}}$ .
- Connect $\text{{OLED display}}: \text{{GND}}$ to GND net.
- Connect $\text{{OLED display}}: \text{{VCC}}$ to $\text{{voltage regulator}}: \text{{VO}}$ .

Other Connections

LED (WS2812B-B):
- Connect $\text{{LED1}}: \text{{DIN}}$ to $\text{{esp32-c3 mini-1}}: \text{{IO7}}$ .
- Connect $\text{{LED1}}: \text{{VDD}}$ to $\text{{voltage regulator}}: \text{{VO}}$ .
- Connect $\text{{LED1}}: \text{{VSS}}$ to GND net.

Charging Module

Charging Module:
- Connect $\text{{charging-module}}: \text{{OUT+}}$ to $\text{{voltage regulator}}: \text{{VI}}$ .
- Connect $\text{{charging-module}}: \text{{OUT-}}$ to GND net.
- Connect $\text{{charging-module}}: \text{{BAT+}}$ to the positive terminal of the battery.
- Connect $\text{{charging-module}}: \text{{BAT-}}$ to the negative terminal of the battery.

Additional Connections

Ferrite Beads (BLM21PG331SN1D):
- Place $\text{{ferrite beads}}$ (FB1) between any DC lines from power sources and ICs to reduce noise.

Please check these connections and adjust any specifics as per your project's requirements. Let me know if you need further modifications or additions!

Reviews

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
jharwinbarrozo
15.5k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M

Project Name

firstPCB

Description

This project aims to develop a wearable and portable pregnancy monitoring system that continuously tracks key health parameters and provides real-time notifications to healthcare providers and family members. The solution integrates a comfortable, non-intrusive wearable device with embedded sensors, a mobile application, cloud connectivity, and machine learning algorithms to predict and manage potential complications.

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor	Qty 1
Arrow	$3.30–$3.30
Digi-Key	$17.00–$28.32
LCSC	$22.99–$23.12
Mouser	$17.33
Verical	$2.93–$2.95

Assets

No assets added.

Controls

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.

katende / firstPCB

Schematic