Finding 1x10 2.54mm Component
Worked for 36 sec
Found suitable Flux library matches:
-
Male header:
Pin Header 01x10 2.54mm Vertical— through-hole, single-row, 10-pin, 2.54 mm pitch
Part UID:25d0ac6e-7b19-6de7-6279-8df1849ea174 -
Female socket header:
Pin Socket 01x10 2.54mm Vertical— through-hole, single-row, 10-pin, 2.54 mm pitch
Part UID:f8551a11-0345-c403-301f-f1775c41bfad
For a Raspberry Pi Pico shield, use the female socket if the shield plugs onto Pico male pins, or the male header if this board exposes pins outward.
Can you add two 1x10 female socket headers to match the Pico sides?
Worked for 16 sec
I’ll check the existing Pico header arrangement, then try to add two matching 1x10 female socket headers and validate the result. Since you only have view access to this project, edits may be blocked by permissions.
Thought for 50 sec
I found the project currently has 43 terminal components and no schematic nets, but I couldn’t add the two headers because your access is view-only.
Use this part when you or the owner edits the project: Pin Socket 01x10 2.54mm Vertical
Part UID:
Part UID:
f8551a11-0345-c403-301f-f1775c41bfadAdd two copies, e.g.
J1 and J2, for the Pico side female socket headers. Ask the project owner to grant edit access or fork the project, then I can add them directly.Fork and add
Owner edit access
Header placement guidance
Wire header pins
Review current design
